Le S3 x626 bricked issue

[raydj2003]

Hi, I have checked this thread as I experienced the same issue(If confused what I'm talking about read
www chinaphonearena com/forum/Thread-Question-LeEco-Le-S3-X626-Helio-X20-Bricked ), I was able to get past the phone buttons not working and was able to flash a new firmware. But this led to another issue considering the system.

For one, I am unable to unlock my bootloader, I just receive the error : FAILED (remote: unlock operation is not allowed), and there is no way fro me to get in my android as it always stays on the LeEco POWERED BY ANDROID screen, which then shuts down and reboots.#

As well as this, the display is now very unusual: the LeEco logo is coloured green white and yellow, the display is flipped horizontally and mirrored vertically.

The image above shows this.

It's VERY annoying and I hope it can be solved.
NOTE!! I can still use locked bootloader/fastboot, can't use adb and can use SP FLASH TOOL

 

[damtrx_]

You need to power the phone and wait till boots. Enter the flipped UI enable developer mode and unlock the bootloader.

All the control are flipped so be patient.
After that enter fastboot and flash the original rom

 

[raydj2003]

You need to power the phone and wait till boots. Enter the flipped UI enable developer mode and unlock the bootloader.

All the control are flipped so be patient.
After that enter fastboot and flash the original rom

Thanks for the reply, I fixed the issue the same day, I just fixed it using the second part to tickernel's red light unbrick tutorial, I completely missed it out. The rom I was using where everything was inverted was just to unbrick the phone, then after I'd have to flash the rom provided by tickernel to fix. It worked again and an advantage was that there was no more ORANGE state, I didn't have to patch to hide the message nor wait the 5 seconds, so now I can flash custom roms on my phone without the message. The method you provided wasn't the fix, before opening this thread I double checked and saw your method, but thanks anyway .

 

[Kychera22]

it was necessary to use a mirror. for example, in the bathroom

 

[Shekor]

after brick and ressurect what write in (telephone settings) model?

 

[Kychera22]

after brick and ressurect what write in (telephone settings) model?

it depends on which model is taken ROM. It does not play any role. Can be changed to Build.prop

 

[Shekor]

it depends on which model is taken ROM. It does not play any role. Can be changed to Build.prop

after bad ressurects i return my device le x626. to le x620 with eui 5.8.018S (stab.) it works normal. But was some bugs with 4g on (turn phone off) and google programs don's start.
But i fixed it all, now it works great, but i think is it bad?

 

[Kychera22]

take the stock firmware 28. and install. why use the old version? maybe get my firmware.
to use google apps. you need to download google installer, then after installation, in the settings give permissions to all Google apps.
and correctly to do so: to install firmware, then to start system and to configure it. and then only install the google gapps.

 

[raydj2003]

Update on unbrick

With my phone unbricked, it now works perfectly. But now the battery drains very fast. It drops by around 25% in less than half an hour with normal use such as watching videos on youtube in "360p" with all my apps closed, but still the battery drains. I have tried flashing different roms and clearing all partitions in twrp and flashing the CUOCO AND WOLFRED x.28s custom stock roms, but still the issue persists. This is very unusual as before my phone bricked, the battery would hold up for at least an hour before falling by 10 to 20 %. Does anyone have any speculations on why or any fixes? Please help.

UPDATE: I fixed by flashing the international version system.img only if you need it send me a message and I'll put up a link.