LeEco Le 1 Pro (x800) Hard Brick Fix

Mr.Blowfly · Sep 8, 2016 4 1 0

t0wlie said:
So this is for the 64 GB US-Version?
Anyone tried it yet?

07.09.16 brick with CN-rom on US

completly "dead"
I try the solution on .pdf some frome here,
WIN 10, no ADB needed
works perfect on the first try....
but
now only 9GB space
and not possible to go on any folder from windows ("please insert sd-card),
the version is verry instable, the solution:
I install Total Commonder + Wlan/network apk (with apk download, cause no playstore on rom) and copied the Cuoco92.rom to the Le 1 X800 , and do the complete install with flashed TWRP, also on the first try...
Now it looks stable.....but
9GB....
Now I look for the best way back to 64 GB ???? some idea´s

twd123 · Sep 8, 2016 at 2:53 PM

Mr.Blowfly said:
07.09.16 brick with CN-rom on US
completly "dead"
I try the solution on .pdf some frome here,
WIN 10, no ADB needed
works perfect on the first try....
but
now only 9GB space
and not possible to go on any folder from windows ("please insert sd-card),
the version is verry instable, the solution:
I install Total Commonder + Wlan/network apk (with apk download, cause no playstore on rom) and copied the Cuoco92.rom to the Le 1 X800 , and do the complete install with flashed TWRP, also on the first try...
Now it looks stable.....but
9GB....
Now I look for the best way back to 64 GB ???? some idea´s

Fastboot and open bat file from this link https://www.dropbox.com/s/601v1mh4vd5nrcf/160519-x1_na_fastboot_Lang_EKL.rar?dl=0
You want a faster response? [emoji6]

Enviado do meu LeTv 1 Pro através de Tapatalk

Mr.Blowfly · Sep 8, 2016 4 1 0

Wow....

:highfive: no no, really fast enough

:laugh:

Thanks

Giuannmanamozz · Sep 8, 2016 18 1 0

twd123 said:
Before making a question you should search on the topic you are reading..
(Check page 3)
Put your phone into Fastboot and open the bat file of this folder

Enviado do meu LeTv 1 Pro através de Tapatalk

Hi thanks for answer and for link.
I read all posts but at post 3 there isn't my same problem. so I post a video of my phone problem on YouTube named "letv x800 brick Blue led"
as you can see blue led Start An on off cicle after qfil flashing. this if i try to press power+vol down too.
If i press power+vol up+vol down i can Not flash With bat file in your link.

p.tanu · Sep 13, 2016 at 7:41 AM

My phone can't detected as “Qualcomm HS-USB QDLoader 9008

Hello guys, i have a Le 1 Pro X800 which hard bricked.I had root and TWRP 3 installed, don't know what went wrong but the screen shut down and my phone doesn't turn on, screen ist just black all the time. When I connect it to the computer I can't see any device in device manager,

I tried to connect with windows 7 , 8 ,8.1 and 10 but nothing.
and I follows this
------------------------------------------
Make your PC ready for the big day:
Please turn off internet connections.
Remove your mobile from PC or Laptops.
Install the latest “.net Framework” for your Windows.
Uninstall all the driver related to mobile, as well as any Qualcomm driver if you have install any. Uninstall them through Device Manager FIRST, then program manager. Here I used a software called “REVOUninstaller” to remove completely the driver softwares and Device Remover to completely remove installed unnecessary device.
Then run “CMD” or “Windows Terminal” as administrator and type:
bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
Restart your PC or Laptops, and you should see this watermark at the bottom right of your desktop, just like the pic below”
Download QualcommDrv.zip from here, extract to an empty folder, then open the folder according to your Windows type (x64 or x86) and double click dpinst64.exe (if you have 64-bit Windows) to install the Qualcomm driver
Now it is safe to connect your Qualcomm Mobile to PC or laptop (I connected it in USB2 port). BUT BEFORE YOU CONNECT YOUR Mobile, REMEMBER TO UNPLUG YOUR BATTERY FOR FIVE SECS, REPLUG IT, AND CONNECT YOUR Mobile WITHOUT PRESSING ANY OF ITS BUTTONS. Your phone should now being detected as “Qualcomm HS-USB QDLoader 9008” and the driver version 2.0.8.7 (please check it through Windows’ “Device Manager”)
---------------------------------

It's not work for me
:crying::crying::crying:

p.tanu · Sep 13, 2016 at 10:20 AM

try to press Vol + ,- and power but nothing

For this : Your phone should now being detected as “Qualcomm HS-USB QDLoader 9008” and the driver version 2.0.8.7 (please check it through Windows’ “Device Manager”)
My notebook can't detect any device when I plug in usb.
and I try to press POWER , VOL + , VOL -. Nothing happen.

twd123 · Sep 14, 2016

solution

p.tanu said:
For this : Your phone should now being detected as “Qualcomm HS-USB QDLoader 9008” and the driver version 2.0.8.7 (please check it through Windows’ “Device Manager”)
My notebook can't detect any device when I plug in usb.
and I try to press POWER , VOL + , VOL -. Nothing happen.

i had the same problem, the problem is the drivers
http://forum.xda-developers.com/leeco-le1-pro/how-to/sahara-protocol-fail-qfil-t3450027/page1
for solution

p.tanu · Sep 15, 2016 at 8:11 AM

twd123 said:
i had the same problem, the problem is the drivers
http://forum.xda-developers.com/leeco-le1-pro/how-to/sahara-protocol-fail-qfil-t3450027/page1
for solution

I did it same like this ....
install the drivers that come with that program
go to the folder that has the rom, click on its properties- permissions and select full acess
while with qfil open, hold the volume down on the smarthphone and connect it to the pc.only release the volume- when you hear 3 windows sounds(one sound when you connect and two after 15 seconds) . start download and then you are set.

But I have bad luck....Don't have any sound from my windows 7

hacxors · Sep 16, 2016 9 0 0

Help!! My LeTV x800 does not work!

My LeTV x800 does not work , I tried this method below but gave error !
I tried once and completed but the LeTV called not tried again and presented this error

Download Fail:Unable to download Flash Programmer using Sahara Protocol
Download Fail:Sahara FailSahara Fail

below this link bug image
i.imgur.com/uSTrMrT.png

I'm sorry for my english

twd123 · Sep 16, 2016 at 6:11 PM

hacxors said:
My LeTV x800 does not work , I tried this method below but gave error !
I tried once and completed but the LeTV called not tried again and presented this error

Download Fail:Unable to download Flash Programmer using Sahara Protocol
Download Fail:Sahara FailSahara Fail

below this link bug image
i.imgur.com/uSTrMrT.png

I'm sorry for my english

Check my response on Sahara fail thread

Enviado do meu LeTv 1 Pro através de Tapatalk

---------- Post added at 06:10 PM ---------- Previous post was at 06:05 PM ----------

twd123 said:
Check my response on Sahara fail thread

Enviado do meu LeTv 1 Pro através de Tapatalk

If you don't want to ?
Here,
This program in this link, comes with a folder called drivers
Don't install the program, only the drivers
There is more info and the process there, so I advise you to check it out

Enviado do meu LeTv 1 Pro através de Tapatalk

---------- Post added at 06:11 PM ---------- Previous post was at 06:10 PM ----------

twd123 said:
Check my response on Sahara fail thread

Enviado do meu LeTv 1 Pro através de Tapatalk

---------- Post added at 06:10 PM ---------- Previous post was at 06:05 PM ----------

If you don't want to ?
Here,
This program in this link, comes with a folder called drivers
Don't install the program, only the drivers
There is more info and the process there, so I advise you to check it out

Enviado do meu LeTv 1 Pro através de Tapatalk

http://www.4shared.com/rar/oXDR5qsYba/AFTool_437.html

Enviado do meu LeTv 1 Pro através de Tapatalk

Giuannmanamozz · Sep 8, 2016 18 1 0

ok guys i have flashed in a particolar mode qfil. I have copied files from folder exctract from 160519-x1_na_…L.rar in folder exctract from first post link. after the flash device apparently reboot and pc shows Android Bootloader Device. Well. I run bat x1_na...bat and start flash... success ... ok... I try to reboot.. screen stay off. If I try to Put in download mode (pwr+Vol down) some time Red light turn on steady. I think battery charge is Low. If I try to power on device,or put in recovery mode (pwr+volup) or in download mode (pwr+voldwn)makes two Short vibration. display still stay off. I ve tried to press power for a Long Long time.. nothings. .
I think battery charge is Low. whic is mode of battery charge? download mode? recovery mode? or qfil mode? have you An idea of this trouble?

twd123 · Mar 5, 2016 112 10 18

Giuannmanamozz said:
ok guys i have flashed in a particolar mode qfil. I have copied files from folder exctract from 160519-x1_na_…L.rar in folder exctract from first post link. after the flash device apparently reboot and pc shows Android Bootloader Device. Well. I run bat x1_na...bat and start flash... success ... ok... I try to reboot.. screen stay off. If I try to Put in download mode (pwr+Vol down) some time Red light turn on steady. I think battery charge is Low. If I try to power on device,or put in recovery mode (pwr+volup) or in download mode (pwr+voldwn)makes two Short vibration. display still stay off. I ve tried to press power for a Long Long time.. nothings. .
I think battery charge is Low. whic is mode of battery charge? download mode? recovery mode? or qfil mode? have you An idea of this trouble?

Just unplug and again and leave it overnight

Enviado do meu LeTv 1 Pro através de Tapatalk

p.tanu · Sep 17, 2016 at 4:48 AM

twd123 said:
Just unplug and again and leave it overnight

Enviado do meu LeTv 1 Pro através de Tapatalk

My battery is full before hard bricked.How many day I should leave my phone?

---------- Post added at 10:48 AM ---------- Previous post was at 10:45 AM ----------

twd123 said:
Check my response on Sahara fail thread

Enviado do meu LeTv 1 Pro através de Tapatalk

---------- Post added at 06:10 PM ---------- Previous post was at 06:05 PM ----------

If you don't want to ?
Here,
This program in this link, comes with a folder called drivers
Don't install the program, only the drivers
There is more info and the process there, so I advise you to check it out

Enviado do meu LeTv 1 Pro através de Tapatalk

---------- Post added at 06:11 PM ---------- Previous post was at 06:10 PM ----------

http://www.4shared.com/rar/oXDR5qsYba/AFTool_437.html

Enviado do meu LeTv 1 Pro através de Tapatalk

thanks for your advised but didn't work for me.

KvakMekRampa · Mar 7, 2012 41 4 0

Giuannmanamozz said:
ok guys i have flashed in a particolar mode qfil. I have copied files from folder exctract from 160519-x1_na_…L.rar in folder exctract from first post link. after the flash device apparently reboot and pc shows Android Bootloader Device. Well. I run bat x1_na...bat and start flash... success ... ok... I try to reboot.. screen stay off. If I try to Put in download mode (pwr+Vol down) some time Red light turn on steady. I think battery charge is Low. If I try to power on device,or put in recovery mode (pwr+volup) or in download mode (pwr+voldwn)makes two Short vibration. display still stay off. I ve tried to press power for a Long Long time.. nothings. .
I think battery charge is Low. whic is mode of battery charge? download mode? recovery mode? or qfil mode? have you An idea of this trouble?

Overwrite your rawprogram_unsparse.xml with this file and redo QFIL, your display should start work right after QFIL: https://mega.nz/#!AoQGCZ5B!n6sXWr4o-...ABFEO8nmLwOoRw

Giuannmanamozz · Sep 8, 2016 18 1 0

KvakMekRampa said:
Overwrite your rawprogram_unsparse.xml with this file and redo QFIL, your display should start work right after QFIL: https://mega.nz/#!AoQGCZ5B!n6sXWr4o-...ABFEO8nmLwOoRw

thanks my Friend. . but.. What s the decrypt Keys? i can Not download

hacxors · Sep 16, 2016 9 0 0

Mr.Blowfly said:
07.09.16 brick with CN-rom on US
completly "dead"
I try the solution on .pdf some frome here,
WIN 10, no ADB needed
works perfect on the first try....
but
now only 9GB space
and not possible to go on any folder from windows ("please insert sd-card),
the version is verry instable, the solution:
I install Total Commonder + Wlan/network apk (with apk download, cause no playstore on rom) and copied the Cuoco92.rom to the Le 1 X800 , and do the complete install with flashed TWRP, also on the first try...
Now it looks stable.....but
9GB....
Now I look for the best way back to 64 GB ???? some idea´s

I had the same problem, install a new rom had returned to normal
I used this rom forum of LeTV

doc-0s-9o-docs.googleusercontent.com/docs/securesc/ha0ro937gcuc7l7deffksulhg5h7mbp1/95fp60gejp6rglpi0h6l3pmsn39omnb2/1474077600000/01384309292365269487/*/0B9s5NUf528GlWlE2cjFZcmt4Z1U?e=download

Giuannmanamozz · Sep 8, 2016 18 1 0

Mr.Blowfly said:
07.09.16 brick with CN-rom on US
completly "dead"
I try the solution on .pdf some frome here,
WIN 10, no ADB needed
works perfect on the first try....
but
now only 9GB space
and not possible to go on any folder from windows ("please insert sd-card),
the version is verry instable, the solution:
I install Total Commonder + Wlan/network apk (with apk download, cause no playstore on rom) and copied the Cuoco92.rom to the Le 1 X800 , and do the complete install with flashed TWRP, also on the first try...
Now it looks stable.....but
9GB....
Now I look for the best way back to 64 GB ???? some idea´s

Hi. What is the pdf that you read?

Mr.Blowfly · Sep 8, 2016 4 1 0

My mistake...

Giuannmanamozz said:
Hi. What is the pdf that you read?

Hi Giuannmanamozz,
sorry the PDF is for the first ROM installation....., and i found it in Chinamobiles
homepage.hispeed.ch/wilrit/downloadfiles/Le1Pro_Install-Anleitung(dot)pdf

But I install the CN-Rom on US....., -> completly dead..
I do the reinstall from here..., perfect on the first try -> but with 9GB
Then i install the cuoco-rom.... 9GB too

Then I try the fastboot version on answer 222 of this thread -> perfect... 64GB back

Win10 on a small HP easybook, runs perfect with MS included ADB (no errors and perfect on the first try)

Best wishes from munich

Blowfly

Giuannmanamozz · Sep 19, 2016

Mr.Blowfly said:
Hi Giuannmanamozz,
sorry the PDF is for the first ROM installation....., and i found it in Chinamobiles
homepage.hispeed.ch/wilrit/downloadfiles/Le1Pro_Install-Anleitung(dot)pdf

But I install the CN-Rom on US....., -> completly dead..
I do the reinstall from here..., perfect on the first try -> but with 9GB
Then i install the cuoco-rom.... 9GB too

Then I try the fastboot version on answer 222 of this thread -> perfect... 64GB back

Win10 on a small HP easybook, runs perfect with MS included ADB (no errors and perfect on the first try)

Best wishes from munich

Blowfly

thanks bro.
I ve tried to flash that bat.. nothings to do

twd123 · Sep 20, 2016 at 8:10 AM

Giuannmanamozz said:
thanks bro.
I ve tried to flash that bat.. nothings to do

Go on properties of that folder and give full acess
The open bat file as a administrator

Enviado do meu LeTv 1 Pro através de Tapatalk

LeEco Le 1 Pro (x800) Hard Brick Fix

New member

Senior Member

New member

Member

Member

Member

Senior Member

Member

Member

Senior Member

Member

Senior Member

Member

Member

Member

Member

Member

New member

Member

Senior Member