LeeDrOiD R Urbane Port V3.1 - Wear 1.3 - September 14th- Stable

Search This thread

LeeDroid

Recognized Developer
Jan 13, 2007
28,850
45,645
Newton Aycliffe
www.leedroid.co.uk
Leedroid.png
Proudly presents LeeDrOiD Urbane

An LG Urbane Port for the LG G Watch R

LeeDrOiD Accepts no responsibility for:
Any damage to your device
Any loss of data
Lack or loss of sleep - Due to but not solely caused by ROM flashing addictions
The end of the world
Or your granny's Alzheimer's (It's a disease, it had nothing to do with me)



Installation instructions, thanks to @AndiTails :

  1. Download LeeDrOiD_R_Urbane_Port_V3.1.rar from the download section below and extract the images
  2. Reboot your watch to the bootloader (tap 10 & 4 o'clock on LG logo)
  3. Check your watch can be seen by your computer by typing
Code:
fastboot devices

If all good, you can continue!
This will assume you've got the system.img and boot.img files from the LeeDrOiD_R_Urbane_Port_V3.1.rar in the right directory. If not, or unsure, write everything up to the filename, leave a space, and click and drag the file into the command prompt window for the full directory and filename to be added to the command.

Code:
fastboot oem unlock
fastboot format userdata
fastboot format cache
fastboot format system
fastboot flash system system.img
fastboot flash boot boot.img
fastboot reboot

Remove from cradle to ensure you don't get a bootloop on the LG screen. You can replace if you need do when the graphics and swirling boot animation is happening. Or just make sure watch has plenty of charge before you start this.
First boot takes a few minutes.
Pair it up as a brand new "LG Watch Urbane - Black Edition"... Or "LG Watch Urbane" as the case may be ;)

Optional steps (do before reboot) - download original 5.1.1 recovery from here and flash it using the command
Code:
fastboot flash recovery recovery.img

For the grumpy sticklers tht want the stock LG, SuperDrOiD Free boot animation... The stock zip can be found in the downloads section, do the below in recovery.
Code:
adb shell mount /system
adb push bootanimation.zip /system/media/bootanimation.zip
adb reboot

I am making the assumption you already know how to carry out the above commands, if not then go here The information super highway

Special thanks to: @IntersectRaven & @Tasssadar for their excellent contributions to the Lenok community.


leedroid_what.png
  • Full LG G Watch Urbane LCA44B android 5.1.1 release port - Wear 1.3!
  • All features are fully functional
  • @IntersectRaven Wi-Fi Multi Boot Kernel - click here for original thread and source
  • Fully working Wi-Fi connectivity
  • Busybox pre-installed
  • Root
  • Init.d / busybox run-parts support
  • System tweaks
  • Increased vibration strength
  • Improved transitions
  • Sqlite3 support binary
  • LeeDrOiD boot animation

Known Issues
  • None - you tell me!

Leedroid_changelog.png

LeeDrOiD Urbane V3.1 - September 14th 2015
  • Latest Multi-Boot Kernel by @intersectraven
  • Added additional stock G Watch R watch faces
  • Black LeeDrOiD boot animation
  • Root access

LeeDrOiD Urbane V3.0 - September 4th 2015
  • Re Based on LG Urbane LCA44B Android Wear 1.3 release
  • Updated to intersectRaven's latest WiFi multi boot kernel

LeeDrOiD Urbane V2.0 - June 30th2015
  • Updated to intersectRaven's latest WiFi multi boot kernel
  • Charging animation when docked fixed
  • LeeDrOiD SuperDroid boot animation
  • Init.d busybox run-parts support
  • Added Root / SU
  • LeeDrOiD custom tweaks script
  • Increased vibration strength
  • Improved transition speeds
  • Database cleanup at boot time
  • Sqlite3 support binary
  • And more (been fiddling a lot lateley :)

LeeDrOiD Urbane V1.0 - June 6th 2015
  • Initial Release


Leedroid_download.png
FTP Hosting thanks to the awesome @leefear

Full Rom Downloads



[Intersect Raven Kernel - Click here for original thread & source

XDA:DevDB Information
LeeDrOiD R Urbane Port, ROM for the LG G Watch R

Contributors
LeeDroid
ROM OS Version: Lollipop
ROM Firmware Required: 5.1.1

Version Information
Status: Stable
Current Stable Version: V3.1.0
Stable Release Date: 2015-09-14

Created 2015-06-06
Last Updated 2015-09-14
 

all43

Senior Member
May 27, 2010
212
69
Flashing now bud,I'll report back soon,many thanks!!!


Booted up and all seems fantastic, Tasssadar's wifi mod is functioning as it should, my apps all synced up and its looking great. Thanks again LeeDroid, all43.
 
Last edited:

deejay6901

Senior Member
Aug 27, 2010
441
77
hi. first time user here. just got my watch yest.y question is, does it need to be rooted? or can i flash this directly woth twrp? i just did a manual firmware update yest to 5.1.1.

Sent from my LG-H815 using Tapatalk 2
 
  • Like
Reactions: AirOne70

lil-devil

Senior Member
Jun 30, 2010
568
83
Markham
www.curiositytotheoven.ca
hi. first time user here. just got my watch yest.y question is, does it need to be rooted? or can i flash this directly woth twrp? i just did a manual firmware update yest to 5.1.1.

Sent from my LG-H815 using Tapatalk 2
No you don't need your watch rooted, as long as it is unlocked with TWRP, just flash it and you should be good to go =]
Installation:
1. unlock your bootloader
2. Flash the latest TWRP custom recovery image.
3. Nandroid backup your current install
4. Wipe your cache & dalvik-cache
5. Reboot to bootloader
6. fastboot flash system system.img
7. fastboot flash boot boot.img
8. fastboot reboot
9. ENJOY
 
  • Like
Reactions: TeazeJay

deejay6901

Senior Member
Aug 27, 2010
441
77
awesome!! now i got a hybrid watch! hahaah :D

uploadfromtaptalk1433650591211.jpg

although the twrp part didnt work for me.. still i fiugured a way out.. thank you!! :thumbup::thumbup::thumbup:

Sent from my LG-H815 using Tapatalk 2
 

deejay6901

Senior Member
Aug 27, 2010
441
77
Excellent.... Can you clarify on which twrp bit didn't work?

well.. i installed twrp with no prob. but when tried to boot up, it wont start to watchmode, but will go to twrp. this had happened to me since yest. so what i did was just flash the system, boot, and the normal recovery which i got from another thread.

by the way, i havent tested the wifi yet, is there a way we can get the wifi mac address for this watch? :D my lan uses mac filtering, thus need to register this mac add. hahaha :p

Sent from my LG-H815 using Tapatalk 2
 

LeeDroid

Recognized Developer
Jan 13, 2007
28,850
45,645
Newton Aycliffe
www.leedroid.co.uk
well.. i installed twrp with no prob. but when tried to boot up, it wont start to watchmode, but will go to twrp. this had happened to me since yest. so what i did was just flash the system, boot, and the normal recovery which i got from another thread.

by the way, i havent tested the wifi yet, is there a way we can get the wifi mac address for this watch? :D my lan uses mac filtering, thus need to register this mac add. hahaha :p

Sent from my LG-H815 using Tapatalk 2

Ah I'm following.. at least your sorted mate..

You can get the Mac address in settings - Wi-Fi - advanced ?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 116
    Leedroid.png
    Proudly presents LeeDrOiD Urbane

    An LG Urbane Port for the LG G Watch R

    LeeDrOiD Accepts no responsibility for:
    Any damage to your device
    Any loss of data
    Lack or loss of sleep - Due to but not solely caused by ROM flashing addictions
    The end of the world
    Or your granny's Alzheimer's (It's a disease, it had nothing to do with me)



    Installation instructions, thanks to @AndiTails :

    1. Download LeeDrOiD_R_Urbane_Port_V3.1.rar from the download section below and extract the images
    2. Reboot your watch to the bootloader (tap 10 & 4 o'clock on LG logo)
    3. Check your watch can be seen by your computer by typing
    Code:
    fastboot devices

    If all good, you can continue!
    This will assume you've got the system.img and boot.img files from the LeeDrOiD_R_Urbane_Port_V3.1.rar in the right directory. If not, or unsure, write everything up to the filename, leave a space, and click and drag the file into the command prompt window for the full directory and filename to be added to the command.

    Code:
    fastboot oem unlock
    fastboot format userdata
    fastboot format cache
    fastboot format system
    fastboot flash system system.img
    fastboot flash boot boot.img
    fastboot reboot

    Remove from cradle to ensure you don't get a bootloop on the LG screen. You can replace if you need do when the graphics and swirling boot animation is happening. Or just make sure watch has plenty of charge before you start this.
    First boot takes a few minutes.
    Pair it up as a brand new "LG Watch Urbane - Black Edition"... Or "LG Watch Urbane" as the case may be ;)

    Optional steps (do before reboot) - download original 5.1.1 recovery from here and flash it using the command
    Code:
    fastboot flash recovery recovery.img

    For the grumpy sticklers tht want the stock LG, SuperDrOiD Free boot animation... The stock zip can be found in the downloads section, do the below in recovery.
    Code:
    adb shell mount /system
    adb push bootanimation.zip /system/media/bootanimation.zip
    adb reboot

    I am making the assumption you already know how to carry out the above commands, if not then go here The information super highway

    Special thanks to: @IntersectRaven & @Tasssadar for their excellent contributions to the Lenok community.


    leedroid_what.png
    • Full LG G Watch Urbane LCA44B android 5.1.1 release port - Wear 1.3!
    • All features are fully functional
    • @IntersectRaven Wi-Fi Multi Boot Kernel - click here for original thread and source
    • Fully working Wi-Fi connectivity
    • Busybox pre-installed
    • Root
    • Init.d / busybox run-parts support
    • System tweaks
    • Increased vibration strength
    • Improved transitions
    • Sqlite3 support binary
    • LeeDrOiD boot animation

    Known Issues
    • None - you tell me!

    Leedroid_changelog.png

    LeeDrOiD Urbane V3.1 - September 14th 2015
    • Latest Multi-Boot Kernel by @intersectraven
    • Added additional stock G Watch R watch faces
    • Black LeeDrOiD boot animation
    • Root access

    LeeDrOiD Urbane V3.0 - September 4th 2015
    • Re Based on LG Urbane LCA44B Android Wear 1.3 release
    • Updated to intersectRaven's latest WiFi multi boot kernel

    LeeDrOiD Urbane V2.0 - June 30th2015
    • Updated to intersectRaven's latest WiFi multi boot kernel
    • Charging animation when docked fixed
    • LeeDrOiD SuperDroid boot animation
    • Init.d busybox run-parts support
    • Added Root / SU
    • LeeDrOiD custom tweaks script
    • Increased vibration strength
    • Improved transition speeds
    • Database cleanup at boot time
    • Sqlite3 support binary
    • And more (been fiddling a lot lateley :)

    LeeDrOiD Urbane V1.0 - June 6th 2015
    • Initial Release


    Leedroid_download.png
    FTP Hosting thanks to the awesome @leefear

    Full Rom Downloads



    [Intersect Raven Kernel - Click here for original thread & source

    XDA:DevDB Information
    LeeDrOiD R Urbane Port, ROM for the LG G Watch R

    Contributors
    LeeDroid
    ROM OS Version: Lollipop
    ROM Firmware Required: 5.1.1

    Version Information
    Status: Stable
    Current Stable Version: V3.1.0
    Stable Release Date: 2015-09-14

    Created 2015-06-06
    Last Updated 2015-09-14
    26
    Back to normal shifts at work so I can get back to it this week guys!
    20
    New build is up guys
    17
    I'm sure you are aware but Wear 1.4 is rolling out this week. Any planned updates for this ROM?

    Will do an update once the next release drops
    17
    Flashing back to stock now, will get a v3 port based on the latest urbane dump done on Monday night, time is very tight guys