Lenovo M7 3rd Gen (TB-7306F) GSI ANDROID 11 CUSTOM ROM (MT8166)

Search This thread

pavlo950

Member
May 22, 2022
9
2
Will this work on Lenovo TB-7305F?
Probably. You can try and write :D

The best custom rom for TB-7306F is AOSP 11.0 v313 from phhusson
You must download
system-roar-arm32_binder64-ab-vanilla.img.xz
and flash from my instruction post #39
Ive tested too:
lineage-18.1-20220715-UNOFFICIAL-a64_bvS.img.xz - its slow for me and sound is bad
and
superior-a64-bvN-userdebug.img.xz - works fast but sound is very bad
 

GmanGrout

Member
Jan 31, 2017
37
2
DONT flash super.img

Do this:
reboot tab to botloader mode (fastboot mode)
fastboot flashing unlock
fastboot reboot fastboot
fastboot flash vbmeta vbmeta.img (use vbmeta from aosp 11 from official android developer site)
fastboot reboot recovery
enter fastboot (into fastbootd)
fastboot flash system system.img
wipe userdate
reboot and wait 5 minutes and work

The only one custom rom works for me (tb-7306f) is:
dotOS 5.2 arm32-binder64-ab // gsi a64 - please download from official dotod site

If this doesnt work try again but without flashing vbmeta, maybe it work.
Have you got a link for the vbmeta
.img please?
 

GmanGrout

Member
Jan 31, 2017
37
2
DONT flash super.img

Do this:
reboot tab to botloader mode (fastboot mode)
fastboot flashing unlock
fastboot reboot fastboot
fastboot flash vbmeta vbmeta.img (use vbmeta from aosp 11 from official android developer site)
fastboot reboot recovery
enter fastboot (into fastbootd)
fastboot flash system system.img
wipe userdate
reboot and wait 5 minutes and work

The only one custom rom works for me (tb-7306f) is:
dotOS 5.2 arm32-binder64-ab // gsi a64 - please download from official dotod siteen

If this doesnt work try again but without flashing vbmeta, maybe it work.
any ideas? just frozon on me
Microsoft Windows [Version 10.0.19044.2486]
(c) Microsoft Corporation. All rights reserved.

C:\ADB\platform-tools>fastboot flash vbmeta vbmeta.img
Sending 'vbmeta_a' (4 KB) OKAY [ 0.016s]
Writing 'vbmeta_a' OKAY [ 0.000s]
Finished. Total time: 0.016s

C:\ADB\platform-tools>fastboot reboot recovery
Rebooting into recovery OKAY [ 0.000s]
Finished. Total time: 0.000s

C:\ADB\platform-tools>fastboot flash vbmeta vbmeta.img
Sending 'vbmeta_a' (4 KB) OKAY [ 0.016s]
Writing 'vbmeta_a' OKAY [ 0.000s]
Finished. Total time: 0.016s

C:\ADB\platform-tools>fastboot reboot recovery
Rebooting into recovery OKAY [ 0.000s]
Finished. Total time: 0.016s

C:\ADB\platform-tools>fastboot flash system super.img
Invalid sparse file format at header magic
 

GmanGrout

Member
Jan 31, 2017
37
2
any ideas? just frozon on me
Microsoft Windows [Version 10.0.19044.2486]
(c) Microsoft Corporation. All rights reserved.

C:\ADB\platform-tools>fastboot flash vbmeta vbmeta.img
Sending 'vbmeta_a' (4 KB) OKAY [ 0.016s]
Writing 'vbmeta_a' OKAY [ 0.000s]
Finished. Total time: 0.016s

C:\ADB\platform-tools>fastboot reboot recovery
Rebooting into recovery OKAY [ 0.000s]
Finished. Total time: 0.000s

C:\ADB\platform-tools>fastboot flash vbmeta vbmeta.img
Sending 'vbmeta_a' (4 KB) OKAY [ 0.016s]
Writing 'vbmeta_a' OKAY [ 0.000s]
Finished. Total time: 0.016s

C:\ADB\platform-tools>fastboot reboot recovery
Rebooting into recovery OKAY [ 0.000s]
Finished. Total time: 0.016s

C:\ADB\platform-tools>fastboot flash system super.img
Invalid sparse file format at header magic
C:\ADB\platform-tools>fastboot flash system super.img
Invalid sparse file format at header magic
Sending sparse 'system' 1/35 (119164 KB) OKAY [ 3.443s]
Writing 'system' FAILED (remote: 'This partition doesn't exist')
fastboot: error: Command failed
 

Oco

Senior Member
Oct 21, 2012
170
23
You don't have to be rooted and the image is good. In Windows,. I used fastboot command as follows: fastboot flash super C:\super.img and it seems like nothing is happening but give it a minute. It started flashing 35 files one at a time. Worked very well for me
Thanks, i got a flash error header at flashing beginning, decided to go and finished the 35 files. Now tablet is in an endless boot. I'm recovering the tablet with Lenovo rescue and will try to download super.img again, maybe it was corrupted.

UPDATE:
My error was not "fastboot reboot recovery" and wipe after flashing files. It works now, thanks

UPDATE2:
After a few days of use I can't recommend this ROM as it is eventually as fast as original ROM withou any better feature as it would be to have split screen ability.
 
Last edited:

Oco

Senior Member
Oct 21, 2012
170
23
Probably. You can try and write :D

The best custom rom for TB-7306F is AOSP 11.0 v313 from phhusson
You must download
system-roar-arm32_binder64-ab-vanilla.img.xz
and flash from my instruction post #39
Ive tested too:
lineage-18.1-20220715-UNOFFICIAL-a64_bvS.img.xz - its slow for me and sound is bad
and
superior-a64-bvN-userdebug.img.xz - works fast but sound is very bad
it worked up to flashing system sytem.img launching an error after first file stating about a partition error
 

Greenpoem

New member
Mar 11, 2023
1
0
Thanks, i got a flash error header at flashing beginning, decided to go and finished the 35 files. Now tablet is in an endless boot. I'm recovering the tablet with Lenovo rescue and will try to download super.img again, maybe it was corrupted.

UPDATE:
My error was not "fastboot reboot recovery" and wipe after flashing files. It works now, thanks

UPDATE2:
After a few days of use I can't recommend this ROM as it is eventually as fast as original ROM withou any better feature as it would be to have split screen ability.
I have the same problem.

I installed lenovo rescue. I turn off the tablet. Hold vol+ and connect usb. Unfortunately (apparently the lenovo program does not see the tablet) the recovery does not start. As long as I hold vol+ the tablet turns on and then reboots. When I press vol+ it boots into fastboot mode.

How did you proceed?
 

Oco

Senior Member
Oct 21, 2012
170
23
I have the same problem.

I installed lenovo rescue. I turn off the tablet. Hold vol+ and connect usb. Unfortunately (apparently the lenovo program does not see the tablet) the recovery does not start. As long as I hold vol+ the tablet turns on and then reboots. When I press vol+ it boots into fastboot mode.

How did you proceed?
If you follow rescue instructions (forced turning off by keeping pressed specífic buttons/time, etc) and doesn't work i would change of usb port, usb cable or even pc as it really works, i rescued mine several times. Good luck
 

xforce3

New member
Sep 19, 2013
3
0
See attached settings
Hi Deanventure, i have the same exact bluetooth issue you described, and was happy that you found a fix... however, i searched far and wide in all settings and cannot find the menus showed in the screenshot that you attached ;(

Any chance you can explain in more details what you actually tweaked and how to get to do it?

Thanks in advance!
 

xforce3

New member
Sep 19, 2013
3
0
Hi Deanventure, i have the same exact bluetooth issue you described, and was happy that you found a fix... however, i searched far and wide in all settings and cannot find the menus showed in the screenshot that you attached ;(

Any chance you can explain in more details what you actually tweaked and how to get to do it?

Thanks in advance!
nevermind, i found it under the second menu in settings ;)

It worked!
 

ravenoutfit

Member
Mar 15, 2023
13
4
Sheffield, UK
Nexus 7
OnePlus X
After a few days of use I can't recommend this ROM as it is eventually as fast as original ROM withou any better feature as it would be to have split screen ability.
I thank you for updating us with your experience of this ROM. I was going to flash it, just to try, but I don't think I will now :)

DotOS is okay, it works fast enough, faster than stock, so I guess that's good. It's a very basic device anyway so what can anyone expect?
 

Dulence

Member
Nov 16, 2009
5
0
Hello..i need some help. I need to turn off the message for asking the permission when i try to connect usb camera (web camera) on this model of tablet..and go straight to app (Usb camera pro). The app is trying to start when i connect camera,but first i need to confirm it..would installing this version of Android help me with that? Thanks
 

Boucy

New member
May 23, 2023
1
0
22

GSI ANDROID 11 CUSTOM ROM (MT8166)


Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.

DotOS Based on Treble Project


Only for TB-7306F

Working

  • wifi
  • bluethooth
  • camera
  • boot
  • touch
  • mtp/ptp
Bugs
  • offline Charging
View attachment 5619133View attachment 5619135View attachment 5619137View attachment 5619139


Source

Installation

1. Unlock Bootloader
2. Reboot to Fastboot and Flash Super.img using Command fastboot flash super (path to super.img)
3.wipe data and reboot



Downloads
am doing something wrong as it boot loops
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1

    Lenovo M7 3rd Gen (TB-7306F) GSI ANDROID 11 CUSTOM ROM (MT8166)


    Code:
    * Your warranty is now void.
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or your getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.

    DotOS Based on Treble Project


    Only for TB-7306F

    Working

    • wifi
    • bluethooth
    • camera
    • boot
    • touch
    • mtp/ptp
    Bugs
    • offline Charging
    Screenshot_20220520-051917.png
    Screenshot_20220520-051913_Lawnchair.png
    Screenshot_20220520-051907_Lawnchair.png
    Screenshot_20220520-051940_Android_System.png



    Source

    Installation

    1. Unlock Bootloader
    2. Reboot to Fastboot and Flash Super.img using Command fastboot flash super (path to super.img)
    3.wipe data and reboot



    Downloads
    1
    this is great. just flashed the super.img
    and it runs beautifully. thanks for your work.
    one question: how do i extract boot.img?
    i tried a couple different things but nothing worked.
    Use mtkclient
    1
    Hello.

    I do something wrong or something wrong is with this image. Ive got:


    Im using fastboot on Ubuntu Desktop. Someone can give me a tip, please?

    PS. Earlier I unlocked with succes. Must I rooted 1st and then flash or unlock is enough?
    You don't have to be rooted and the image is good. In Windows,. I used fastboot command as follows: fastboot flash super C:\super.img and it seems like nothing is happening but give it a minute. It started flashing 35 files one at a time. Worked very well for me
    1
    I have been getting notifications of an OTA. Clicking on it did not but today, there's a notification on my desktop. I clicked "install".

    Is this device capable of an OTA for this build?
    ota not work in gsi
    1
    what solution did you find? is bt full function?
    See attached settings