I just flashed cm 13 on vibe x2-ap everything works fine just the sim wont be detected if you could help me I would be grateful.
edit:after flashing the rom i treid flashing AP-S223 modem files that were given by eryen but still no luck.
the fact is AP is dual sim and EU is single.if someone knows a fix please help.
Hello, i own a Lenovo vibe x2 lolipop 5,0 international version. First problem, my camera won't focus unless i put phone down to a table and click on shutter button very lightly. If i move phone even for a milimeter the picture is not clear. i have searched for solutions all over but nothing worked. any solutions? can i repair this if i install a custom rom? Second problem is my battery, it last for about half a day. That wouldn't bothered me if charging wouldn't take 3hours, from 10% to 100%.
I have tried different chargers and cables. Battery status is good. Is there any way i can speed this up?
To charge the battery fast...
1.Boot into recovery mode...
2.clear the cache...
3.Reboot your phone...
4.another trick is enable airplane mode in charging this
Will make ur phone to charge faster...
The camera issue is with the software...
Download this and install...This will make it work...
Try changing ur charger and it's cable...I too had this issue once... I changed my charger... now my phone charges within
For the camera issue try clearing the data and cache in app settings...Hope it works...
For the antenna issue try the suggestion bopok said...
Hit thanks if worked:good:
Hello. Recently I bought chinese Lenovo X2 CU, and I got this very strange problem. When I insert a card of provider with 4G, T-Mobile MK or Vip Mk the signal of the phone is very unstable. It goes from 4G to 3G to 2G, most of the time I can't get 4G but it goes from 3G to 2G and vice versa. It doesn't matter if you move or you are stationary. When I insert older card of One MK, provider that doesn't have 4G, signal is stable with 3G. I've tried changing firmware, modems etc.
Also I have another problem. When I try to install Lenovo X2 AP lollipop firmware via SP Flash Tool, the phone only boot loops with black screen. But it works with Lenovo X2 AP or EU KitKat firmware. When I upgrade via OTA to Lollipop same thing happens - boot loop with black screen.
Anyone can help me with this problems?
I offer you two new images of a logo for Vibe X2.
Build and test it I. Mr. Nafuk from LFTeam, the real master of paints and a brush helped with drawing.
There are confirmations that it works correctly on many versions, as well as charging when the device is turned off.
Downloading is possible with : NeedROM
Installation is possible as well as from TWRP, and from SFTP.
Download the image, place it in any folder in the root of the C: drive on the PC, remove all checkboxes except logo.img, in the logo.img line specify the location of the new logo. Stitch in Download Only mode.
It's even simpler.
Load the image into the internal memory of the phone, boot into the TWRP mode, tap on the Installation, select the bottom Install Image, select the file with the image and flash it.
I had been using kingroot for sometime, but now I need to use Google pay.
As Google pay doesn't work with root and a broken Safety Net, I decided to unroot using kingroot's built in unroot and uninstall feature.
But even after that Google pay doesn't work.
I checked with a safety net tester app and it seems that safety net is still broken even though I have unrooted the system.
How do I fix this.
PS: I haven't changed any system settings or flashed any ROM.
I use Lenovo X2-EU Stock Android with TWRP.
Unrooting through Kingroot leaves some traces of the files behind and that's why the safety net is triggered.
Solution is to clean flash the ROM again so that the traces won't be there and then try to use Google pay.
Magisk is the best rooting solution which doesn't trigger safety net and it's helps us mask the root. So u can use Banking apps.
First of all, I'm terrible sorry, if there's already a solution. I read a lot of comments, but so many of them were really similiar, I couldn't decide what to follow.
So I got my Vibe X2 - CU from china. It is perfectly ok, everything works fine, I have Kit Kat on it. Of course it has some of those annoying chinese apps like baidu browser, which start running every time, and I have to shut them down. So I saw that the new Lollipop came out, and I read back, and found out that I can install the AP version on CU too.
If anyone could write down every step on how I should update to Lollipop, I would be really thankful. I read that I need TWRP, but it needs root access, and I haven't rooted my phone yet. This is one of the main reasons I haven't started it yet.
I've already downloaded this file:
My VIBE X2 is a CU version. I haven't done anything with it since I got it, only installed a few apps. It doesn't have root access yet. I would like to upgrade to Lollipop and have Root access.
I'm terribly sorry, if there's already a solution for this, but since TWRP needs root, and I don't have it, I would like if someone could write aall the steps I need to make in one post, so I wouldn't have to find out what I have to do from several other posts, and since I'm a bit new to this, I really don't want to mess up anything.
Thanke you for your help in advance