Lenovo Xiaoxin pad 2022

Search This thread

dashlicious

Member
Oct 8, 2016
18
1
I unlock man, it’s easy, just put first zui rom, after that extract your oem, save as backup, use a hex editor, change your serial to HAHAHA and execute some fast boot commands and u will have it unlocked
 

D4Rk!NH0

Member
Jun 3, 2023
6
0
Eu desbloqueio cara, é fácil, basta colocar primeiro a rom zui, depois extrair o oem, salvar como backup, usar um editor hexadecimal, mudar seu serial para HAHAHA e executar alguns comandos de inicialização rápida e você o desbloqueará


Juro que já tentei de tudo, com lenovo rescue e também com zui, alguém pode gravar um vídeo por favor? nem consigo e meu tablet não inicia, estou muito chateado
 

dashlicious

Member
Oct 8, 2016
18
1
Juro que já tentei de tudo, com lenovo rescue e também com zui, alguém pode gravar um vídeo por favor? nem consigo e meu tablet não inicia, estou muito chateado
I saw you screenshot now, unlock is fail because before you put the commands you need to install the first Chinese firmware, after that, edit your serial to HAHAHAHA, download the sn.img and execute the command. Put sn.img on c:/sn.img and at the end of command put the location c:/sn.img.
 

D4Rk!NH0

Member
Jun 3, 2023
6
0
I saw you screenshot now, unlock is fail because before you put the commands you need to install the first Chinese firmware, after that, edit your serial to HAHAHAHA, download the sn.img and execute the command. Put sn.img on c:/sn.img and at the end of command put the location c:/sn.img.

THANK YOU VERY MUCH!!!!!!! It worked out
 

dashlicious

Member
Oct 8, 2016
18
1
THANK YOU VERY MUCH!!!!!!! It worked out
Eu queria te responder em português mas é contra as regras do fórum.
mod translation: "I wanted to answer you in Portuguese but it's against forum rules."

Glad u solved that, don’t forget to see if u have L1 installed after u lock again the bootloader, because I couldn’t solved it on mine
 
Last edited by a moderator:

simplepinoi177

Forum Moderator
Staff member
MOD TRANSLATION
"I've tried everything, I swear, I can't do the procedure hahahaha, can you instruct with pictures please? I've tried everything and it's never possible to unlock, I can change the serial to hahahaha but unlocking with Fastboot flash unlock sn.img command fails"
*****************************************
Já tentei de tudo, juro, não consigo fazer o procedimento hahahaha, pode instruir com fotos por favor? Já tentei de tudo e nunca é possível desbloquear, posso mudar o serial para hahahaha mas ao desbloquear com o comando Fastboot flash unlock sn.img falha
MOD TRANSLATION
"I swear I've tried everything, with lenovo rescue and also with zui, can someone record a video please? I can't even and my tablet won't start, I'm very upset"
***********************************
Juro que já tentei de tudo, com lenovo rescue e também com zui, alguém pode gravar um vídeo por favor? nem consigo e meu tablet não inicia, estou muito chateado
MOD TRANSLATION
"Perfect, I'll check, just for him to come back to life I'm already very happy"
*******************************************
Perfeito, vou verificar, só para ele voltar à vida já estou muito feliz
MOD TRANSLATION
"I sent you a direct with my wpp"
**********************************************
Te mandei um direct com meu wpp
@D4Rk!NH0, @dashlicious, You may/seem-to already know, but I wanted to re-iterate & remind you that as per Forum Rule 4 (quoted below), we ask all members to please post in English. Please consider this when creating a post in the future. Feel free to include your original message under the English message if you wish. If you do not know English, I encourage you to use any of the resources in the quote below. Your posts has been translated as a one-time courtesy.


Thank you for your cooperation, and have a good one!
simplepinoi177 FSM (Forum Specific Moderator)
4. Use the English language.

We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ , https://www.babelfish.com/ or https://fanyi.baidu.com/#auto/en or use one of your choice.
 
Last edited:
  • Like
Reactions: Oswald Boelcke

aloc12345

New member
Jun 11, 2023
3
0
gonna try this soon, thanks for input (y)

update; the content.xml was already name as you mention, means nothing change and I still got the same error , :cry:

thanks
I am planning to buy a
Hello. Just got my xiaoxin pad with China rom. Installed Google Play but can't log in. Error. Any solution guys ??
hi. I am planning to get this tab in China. of course it will be with China rom. According to your message, does it mean I can use Google service with China rom? thanks
 

aloc12345

New member
Jun 11, 2023
3
0
hello. I am planning to get this tab in China and it would be loaded with China rom

would I be able to use Google play services with China rom? do I have to root / unlok the tab in order to use Google play?
 

TinnerGrr

New member
Jun 11, 2023
1
0
I'm Brazilian and I want to change my global rom to the standard Chinese rom of the tablet, I'm having problems with the global rom ( crashes due to excessive use of ram ), I also want to use the functions of the Chinese rom, I don't know much what to do and I wanted to know if Can someone help me with this, if you can talk on discord or whatsapp even better, the only thing I know is that my tablet already has the bootloader unlocked.
 
Last edited:

lukeprokopec

Member
Apr 8, 2019
19
2
instructions for switching to GSI firmware

Necessary • The unlocked bootloader instructions are in the header
• Vendor from ZUI (i.e. a tablet stitched onto a Chinese ZUI, preferably the latest version)
• Pre-downloaded and installed adb/fastboot drivers

How to choose the firmware?
When downloading, I ran into a problem - a bunch of files with different names and pT, bvS, etc.
For example lineage-19.1-20221122- UNOFFICIAL-arm64_bgN-vndklite-secure.img (clickable)

1. arm64 means that the firmware for the ARM 64-bit processor architecture is what we need
2. Next, we are interested in the first letter b, which means for a/b devices (our ARM64 A/B)
3. The second letter: g - gapps (Google Apps are built in), v - vanilla (clean, no Google), I also met o - google one
4. The third letter: S or Z - rooted, N - non-rooted.
5. vndklite - a system in rw (which will allow you to swarm and change system files


Download the liked GSI example from here
Installing adb drivers
Download our kitchen - GSI_Tools, unpack the ADB_platform-tools folder from the archive to the root of the disk (C:\ or D:\ - it doesn't matter)
From the archive of the downloaded GSI firmware, we unpack the system image into our ADB_platform-tools folder. Rename this image to "system" (for example: from "lineage-19.1-20221122- UNOFFICIAL-arm64_bvS-vndklite.img" in "system.img")
We switch the tablet to FastBoot mode: when the tablet is turned off, we press the Power button and Volume + until it loads into the mode we need
We connect the cable to the computer, the drivers should be picked up
° Before installing the vndklite image, you need to flash vbmeta with keys that disable verification. This is done 1 time and forgotten, this will allow you to put vndklite assemblies

1. Switch the tablet to FastBoot mode: when the tablet is turned off, we simultaneously hold down two buttons - Power On and Volume +, until it loads into the mode we ne
2. Connect the cable to the computer, the drivers should be picked u
3. In the ADB_platform-tools folder, run VbmetaFlash.bat the vbmeta firmware will start with the necessary parameter
sped

°In the ADB_platform-tools folder, run SystemFlash.bat the firmware of the System image will start. Please note that the system image must be flashed in FastbootD mode. The script puts us in the desired mode:
View attachment 5808967
• Some roms in the firmware process meet us with a message on the command line:
«Invalid sparse file format at header magic»
This does not mean that something went wrong. The above-mentioned GSI image is normally flashed and launched with this message

• If necessary, you can put (for example, a patched) boot.img image in the ADB_platform-tools folder and transfer the tablet to FastBoot to launch BootFlash.bat - the boot image firmware will start.
• The tablet will restart automatically

• Done. You did it!
Can I flash the GSI from ZUI 13.5.365, or does it have to be the latest version? I don't want to mess around with the extra steps to update it.
 

xluixx

New member
May 13, 2020
2
0
Does anyone in the original Chinese rom have this problem with the use of the keyboard, whether bluetoth or physical, when you type something, a space appears, the screen goes down and it freezes?
Screenshot_20230614-210216.png
 

PSYCORESYS

Member
Jan 16, 2015
6
0
I am planning to buy a

hi. I am planning to get this tab in China. of course it will be with China rom. According to your message, does it mean I can use Google service with China rom? thanks

yup, as mention by dashlicious , you can use most google apps service but you need to activate google services before installing google installer (search on lenovo main apps )
 

Top Liked Posts

  • There are no posts matching your filters.
  • 11
    INSTRUCTIONS FOR MIGRATING TO ZUI 13.5.365 ON A XIAOXIN PAD 2022 SNAPDRAGON 680 TABLET WITH M10 PLUS 3RD GEN TB128FU GLOBAL ROM INSTALLED AND UNLOCKED BOOTLOADER (NOT TO BE CONFUSED WITH M10 PLUS 3RD GEN WITH MEDIATEK HELIO G80 PROCESSOR).

    PEFORM AT YOUR OWN RISK, I AM NOT RESPONSIBLE FOR WHAT MAY GO WRONG.
    IF YOU DON'T HAVE ENOUGH KNOWLEDGE, DON'T DO IT.

    INSTRUCTIONS AND FILES FOR INSTALL STOCK ROM ZUI XIAOXIN PAD 2022

    ZUI_13.5.365_ST_220526 Firmware in mega from here.

    WiINRAR to unzip the firmware from here. (other decompressors give error when decompressing)

    QUALCOMM PC DRIVERS from here.

    QFIL download from here. FROM HERE INSTRUCTIONS AND CONFIGURATION QFIL TOOL

    RECOVER WIDIVINE L1 (For wdivine L1 you must update your firmware to version ZUI_13.5.476 ST) With system update application: FILES FOR UPDATE FIRMWARE TO ZUI 13 WITH INSTRUCTIONS TXT (respect the order of updates) Then it locks the bootloader following the steps in the attached post. ADB AND FASTBOOT 1.4.3 + DRIVERS + TUTORIAL INSTALATION DRIVERS in the attached post you will also find the fastboot commands.

    FILES FOR UPDATE FIRMWARE TO ZUI 14 Installing the wrong version will brick your device!! you need to update one by one, check the ZUI version you are sitting on to update by numerical order of each version, there are different combinations to reach the end of the process.

    Tutorial video flash firmware with QFIL

    Tutorial video install PLAY STORE and SERVICES GOOGLE PLAY

    Tutorial video for app SETEDIT, switch apps to your native language

    Install app setedit from play store on your phone and tablet, on the tablet click on add new settings and create the same value that appears on your phone "system_locales" without " " are automatically added, then add the abbreviation of your language and country without the " " example: "es-ES" then restart your device, Applications will switch to your native language, system settings will remain in English, you will get used to it very quickly.

    You can manually uninstall all junk chinese apps in ZUI.

    The security app is very aggressive on ZUI. It will repeatedly remove all permissions given to apps like notifications etc. Type in the system browser "special app access", then access "modify system settings" and deny permission to the security application.
    (regardless of this point, every time you install an application in zui you must manually grant the permissions in the "apps management" section in the menu settigs)
    5
    To lock again the pad, you just need activate the debug USB and power off the device and go to fastboot mode and on cmd in computer you type:
    1. fastboot devices (to see if your device is there)
    2. fastboot flashing lock and select the option on your device and done.

    ONLY LOCK IF YOU HAVE THE LATEST UPDATE IN ZUI (ZUI_13.5.476_ST).
    3
    Have you used adb fastboot program to open the cmd?

    I finally managed to make it work.
    Widevine Is L1 after relocking bootloader.

    Thank you all
    3
    My suggestion is to use another launcher. It’s way easier fixing something from ZUI tbh
    3
    I am an author of the post you attached. It's written pretty simple so you can translate it using Google Translate.
    Can you give me a detailed video on how to install rom global Pad 2022? thanks you