Lenovo Z5 Imei recovery

[sth0r]

I still have twrp and my wifi works...

 

[vosathanh]

I still have twrp and my wifi works...

Not me. Just checked again everything works now, but no recovery. If i try to flash twrp, i may lose wifi again. wtf. Now wait for ways back to stock rom.

 

[fl1po]

The guy that had infinite reboot with Lenovo logo probably had the same trouble as me. Volume buttons stopped working along with the sensors. I can't get into fastboot mode and using adb via laptop requires confirmation on the phone which is impossible due to sensors.

Edit: just found a workaround: bought an OTG, connected my mouse, went to the privacy policy and found a link which opened a browser. Opened Google Play and installed Nova Launcher. Thanks to the launcher, I was able to go to settings and hard reset.
Edit2: hard reset doesn't help, can't even enable the developer mode. I'm stuck here and QFIL doesn't help.

 

[sth0r]

The guy that had infinite reboot with Lenovo logo probably had the same trouble as me. Volume buttons stopped working along with the sensors. I can't get into fastboot mode and using adb via laptop requires confirmation on the phone which is impossible due to sensors.

Edit: just found a workaround: bought an OTG, connected my mouse, went to the privacy policy and found a link which opened a browser. Opened Google Play and installed Nova Launcher. Thanks to the launcher, I was able to go to settings and hard reset.
Edit2: hard reset doesn't help, can't even enable the developer mode. I'm stuck here and QFIL doesn't help.

If you was able to installe nova launcher you should be able to do adb reboot bootloader and then flash the presist.

 

[fl1po]

If you was able to installe nova launcher you should be able to do adb reboot bootloader and then flash the presist.

I wasn't, there was no usb debugging and my laptop couldn't identify the device.

 

[sth0r]

I wasn't, there was no usb debugging and my laptop couldn't identify the device.

what do you mean with "there was no usb debugging"? Did you enable it? If not you need to enable the developer menu and in there enable usbdebuging...

 

[fl1po]

what do you mean with "there was no usb debugging"? Did you enable it? If not you need to enable the developer menu and in there enable usbdebuging...

There was literally no option to enable the developer menu because there was no build number. I couldn't activate the phone and it was very limited.

 

[sth0r]

There was literally no option to enable the developer menu because there was no build number. I couldn't activate the phone and it was very limited.

What have you flashed to the phone?

 

[fl1po]

What have you flashed to the phone?

S5 Pro firmware with ZUI 5.0

 

[sth0r]

S5 Pro firmware with ZUI 5.0

Then I just found you problem this is for the Z5.

 

[fl1po]

Then I just found you problem this is for the Z5.

My phone is Z5 and I installed the wrong firmware.

 

[sth0r]

Then you should try flashing the right one with qfil...

 

[sth0r]

hello i have a Lenovo z5 and i have tried their tutorial. https://forum.xda-developers.com/android/general/lenovo-z5-imei-recovery-t3847030
But I come after the installation of the given zui again and again only in qualcomm 9006 menu and thus can not make a backup of qcn what can I do? The phone is closed.

what have you tryed, did you let it boot after installing 075?

 

[Staiger92]

what have you tryed, did you let it boot after installing 075?

Yes, I have the cell phone booted.

 

[sth0r]

On the first boot into 075 you should have access to the diag port.

 

[Staiger92]

On the first boot into 075 you should have access to the diag port.

is this only the first time because I've often already booted 075 because I'm desperate because I'm no longer in the quick setting the phone has closed the bootloader I have a week before a new stock Rome loaded on it as the stock rom bad was translated into German and then unfortunately had to realize that other roms are translated just as bad and now wanted to play a custom rome but could not release the bootloader at the other stock rome

 

[sth0r]

is this only the first time because I've often already booted 075 because I'm desperate because I'm no longer in the quick setting the phone has closed the bootloader I have a week before a new stock Rome loaded on it as the stock rom bad was translated into German and then unfortunately had to realize that other roms are translated just as bad and now wanted to play a custom rome but could not release the bootloader at the other stock rome

Yes the diag port is only open on the first boot. The bootloader should not lock on its own are you sure it is locked?

 

[Staiger92]

Yes the diag port is only open on the first boot. The bootloader should not lock on its own are you sure it is locked?

Can I throw the phone away because I have often booted 075? Yes, the phone is closed trying to play a Custom Rome on the phone with adb and the phone has not responded.

 

[sth0r]

Can I throw the phone away because I have often booted 075? Yes, the phone is closed trying to play a Custom Rome on the phone with adb and the phone has not responded.

No, you need to install 075 again then on the first boot you can backup the qcn.

 

[Staiger92]

No, you need to install 075 again then on the first boot you can backup the qcn.

i have done my settings at qfil 0-sahara Device Type eMMC No Validation Reset after download the phone goes on and jumps directly into No Port Available.