I saw zui 2.1/in the Chinese forum. But looks it is not stable as per user review.
Have any idea?
Have any idea?
That's great, let me know the steps for installation. Are they same as mentioned in the post as i have tried those steps with the another ROM and i ended up with no Bluetooth and WiFi. I just wanna make sure while installing this ROM. Also tell me about Gapps
If you read op there's an installation instruction step by step and also which gapps you should use including link [emoji5]That's great, let me know the steps for installation. Are they same as mentioned in the post as i have tried those steps with the another ROM and i ended up with no Bluetooth and WiFi. I just wanna make sure while installing this ROM. Also tell me about Gapps
Please share me link for that postIf you read op there's an installation instruction step by step and also which gapps you should use including link [emoji5]
Sent from my Z1 using my hand
The op is the first post of this thread on page 1
You mean these stepsThe op is the first post of this thread on page 1
Sent from my Z1 using my hand
Thanks buddy, please share link for both benzo gapps and the ROM you have installed. I hope WiFi and Bluetooth was working fine on the ROM you have installedTry these edited ones...
Steps:
1) Download Rom
2) Download Benzo Gapps
3) Boot Into Recovery ( TWRP )
4) Wipe (Cache/Delvik Cache)
5) Flash Rom Boot up ( Dont Flash Gapps Immediately )
6) Boot Up ,Finish the First Setup (will take more than 5 minutes, just wait for it)
7) Reboot to Recovery and then Flash Benzo Gapps
8) Done !!!!
I tried and it worked, WiFi and Bluetooth was working fine. ZUI was good until speakers stop working, there was zero sound so i have to turn back to COS againTry these edited ones...
Steps:
1) Download Rom
2) Download Benzo Gapps
3) Boot Into Recovery ( TWRP )
4) Wipe (Cache/Delvik Cache)
5) Flash Rom Boot up ( Dont Flash Gapps Immediately )
6) Boot Up ,Finish the First Setup (will take more than 5 minutes, just wait for it)
7) Reboot to Recovery and then Flash Benzo Gapps
8) Done !!!!
Lenovo Zuk Z1 Gets the new ZUI 2.0
its just a custom Skin with a few new features
Zuk Z1 comes with two variants ( Chinese/International)
the Chinese Varient comes with ZUI
while International one comes with Cyanogen OS
Basically the ZUI is Pretty Similar To The Miui
so for MIUI Fans waiting for miui to be ported to Zuk Z1
this is a good option
try it out its an great Rom
Steps:
1) Download Rom
2) Download Gapps
3) Boot Into Recovery ( TWRP )
4) Wipe (Cache/Delvik Cache)
5) Flash Rom Boot up ( Dont Flash Gapps Immediately )
6) Boot Up ,Finish the First Setup
7) Reboot to Recovery and then Flash Gapps( I recommend go for Nano Packs [arm-6.0-nano]
8) Done !!!!
If flashing through TWRP doesn't work for you
Please refer this post for installation guide... http://xdaforums.com/zuk-z1/development/how-to-flash-zuk-z1-zui-version-t3265741
Note: The Rom is Not a Multilaunguage Rom( Comes in only Chinese/English)
and on first boot some might end up getting chinese setup so dont panic just hit the button on the right top corner and get through with setup
you can change the language after you boot up in the settings
Download Link: http://fmdl.ota.lenovomm.com/dls/v6/Z1_CN_OPEN_USER_Q4434.1_M_ZUI_2.0.069_DEV_160629_WC020927C3.zip
Gapps : http://opengapps.org/
If You want a Video Tutorial then please Subscribe to my Youtube Channel ... I am going to Video Turotial on ZUI Rom
you can also request a tutorial ,,,i will be glad to help you guys out....
my youtube channel : https://www.youtube.com/channel/UC7khRQUG4HpBNoFsrEdQY5A
I saw there's a stable 2.1.049 release "Z1_CN_OPEN_USER_Q4434.1_M_ZUI_2.1.049_ST_ROOT_160903.zip" available on the chinese forum.
Is anyone able to mirror it? I don't undestand chinese and I'm unable to register on baidu to download it from the provided url: http://bbs.zuk.cn/z1/t140627/
Here's the link to the site with the direct download option: https://pan.baidu.com/s/1qYvRL9M
First click on the button with the download icon and the 下载(1.19G) text, then answer the CAPTCHA and click the blue 确定 button. If you can't figure out the text on the image, click on the 换一张 link to get a new one.
It doesn't work, it says the file is too big and it must be downloaded with the baidu client.
Already tried and I'm unable to use the client :crying:
Interesting, I had no problem downloading it. Well, I had to try multiple times because the download is slow and the connection got lost many times but it's down now. I'll test if it works and if it does, I upload it to a "mirror" and share that link. Although it may take a few hours, my upload speed is 0.5 Mbps at best.
Have you tried benzo gapps with this?
---------- Post added at 01:10 AM ---------- Previous post was at 01:08 AM ----------
Steps:
1) Download Rom
2) Download Benzo Gapps
3) Boot Into Recovery ( TWRP )
4) Wipe (Cache/Delvik Cache)
5) Flash Rom Boot up ( Dont Flash Gapps Immediately )
6) Boot Up ,Finish the First Setup (will take more than 5 minutes, just wait for it)
7) Reboot to Recovery and then Flash Benzo Gapps
8) Done !!!!
I tried but didn't work... Will let you know if I successful root itThanks for the rom have tried the 2.0 a month ago with a twrp backup from the rom, but there was missing superuser/root. Is it possible to root the rom? Need it for morelocale2
Best regards