LG 2.2-2.3 Rooting

Mar 29, 2011
43
1
0
Hello,

I have an LG P500H that according to the settings menu is currently on Android version 2.2

I've read in countless places that this device is eligible to be upgraded to an official 2.3. Through the LG support tool a notice displays there is an available update which im assuming is the 2.3 itself.

My question is with regards to rooting. I have located a thread about rooting this device on 2.2 firmware but nothing specifying any process for 2.3. If I root on 2.2 my assumption is I will lose my root once I upgrade. How would I go about rooting this device on official 2.3 firmware.

Thanks to everyone for reading.

-------------------------------------------------------------------------------------------------------------------------------------------------

Here I will list the only post I've found referencing this involving rooting through ADB. Can anyone confirm? Or suggest a safer method to ensure success with no issues? The post is as follows:

The LG Optimus One P500 is the one of the best budget Android phones around. Now it can be updated to Android 2.3.3 Gingerbread, then the purpose of writing this article is to help you to root stock gingerbread in an easy way. LG Android Phones
How to root Android 2.3 Gingerbread on LG Optimus One P500:
1. Read everything first and after do what is necessary:
What Is ADB and How To Install It With Android SDK, please go to here.
INSTALLING ANDROID SDK ON YOUR WINDOWS PC from here)
Don’t forget to restart your PC after installations. LG Phone Problem and Solution
2. Download and install SuperOneClick. You can download the tool from here.
3. In adb:
adb devices
adb shell
echo 1 > /data/local/lge_adb.conf
After that open SuperOneClick and root using pneuter. Reboot phone and update Superuser from Market.
This instruction works fine on my LG Optimus One, I had some problems updating superuser, kept force closing, but after restart, it works. hit thanks if this was useful for you.

EDIT: So I try to update software through LG support tool. The first screen of the tool checks the software and says there is an update available. Doesn't specify what version. When the option to start the update is selected the second tool launches and says device is not able to be updated. Another question would be what exactly is going on with that? and how to go about getting the official 2.3 on this P500H. Thanks.
 
Last edited:
  • Like
Reactions: aceniko
Mar 29, 2011
43
1
0
This is ridiculous.

I check the TELUS website which is the carrier for my device. Turns out the only "update" listed on their end is 2.2.1 and the instructions stated my device needed to upgrade as I was running 2.2

So I go ahead and update my device and everything completes as the instructions stated.

Well, now the phone is stuck in a bootloop at the android logo and will not go further. Thanks TELUS.

Edit: Hard reset fixed this issue, now running 2.2.1. Getting really fed up with this so called official 2.3 that I can not seem to get. Anyone with answers please assist.
 
Last edited:
Mar 29, 2011
43
1
0
Thank you for the link. I looked over the thread and noticed that the post mentions v20g and v20c versions for download.

I'm guessing these are international versions as I have checked my phones About menu and noticed I have a software version listed as LG-P500H-v10s

How would this impact installing official 2.3 or is there anywhere I can acquire a version for my device.

Thanks
 
Mar 29, 2011
43
1
0
Would it be correct to say that the reason I cant get this software update through the LG Support Tool or on my Canadian carriers website is because it isn't offered at this time by my specific carrier?

Therefore its been put out mainly to international carriers, hence why I would have to use an unbranded generic firmware? Just wanted to inquire so that when I complete the flash I'm fully educated as to which version I'll be using. Does anyone happen to know if NFC (near field communication) is supported in this unbranded version?

EDIT: Just to add. There appears to be a notice at the bottom of the page mentioning no 2G/3G data - wait for new release. Is this relative to the official 2.3?
 
Last edited:
Mar 29, 2011
43
1
0
So I am experiencing much lag on the 2.2.1 firmware that I am currently running ton this P500H for these reasons I will be attempting to flash to the official 2.3 in hopes of better performance.

Looking to clarify some instruction from the OFFICIAL LG GB thread listed in one of the responses. The tutorial states to flash "the russian way" and provides a HOW TO for using the LG DMP tool. In the tutorial the method says "This HOWTO is for users who want to switch from stock LG 2.3.3 ROM to CM7 or other older ROMs that are NOT based LG's on v20 ROM or vice versa"

My question with the statement is how does it impact the fact that Im on a stock 2.2.1 not flashing to a CM7 or vice versa. Which baseband would I be using as I am not sure what exactly this 2.3 is based on and I am running a v10s.

My guess is I would download the second baseband file in the thread listed as "- P500-v20G-baseband.7z is for official v20[abdg....] ROMs and ROMs based upon it (e.g., GingerLOL, v20G stock ROM, customized v20G ROM, 0x0v3rfl0w ROM and GingerCriccoROM)." and then flash the v20g 2.3 firmware.

If anyone can elaborate so that I dont brick this device when flashing

Another part of the article says "Eventually, all new ROMs will switch to new baseband by default, so it is useful as well if you want to avoid the complete KDZ/Russian way flash which wipes everything." Would this mean flashing "the russian way" with .kdz file would mean not having to change the baseband in the LGDMP tool. Kind of like an all in one solution instead of a drawn out process? I found a post with instructions for KDZ updater but dont have a file for 2.3 android to flash. What is the suggested method and steps? If anyone can clarify
 
Last edited:

RockR172

Senior Member
Jun 12, 2011
1,421
1,503
0
Move this to General section..!!

Guess this should be in the General section and not in development..
Theres a kdz file of europe and russian version on xda.. search for it.. flash it usin kdz and you are done.. you get new baseband and then root using superoneclick.. you will lose your data.. but you can back it up using titanium backup.. flash recovery n den you are ready to use any of the new custom romz.. they perform well in quadrants.. not as much as those developed by our heroes like mik andy and all.. but for a stock rom those values are good.. i reverted back to miks cyanogenmod for itz performance.. anyway, if you want a stable, ALMOST bug free rom, go in for stock 2.3.3... there are minor bugs.. like status bar icons not alligned and stuff but you can manage with it... ;)