• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Lg d3 d850 autoboot

Search This thread

Corund

New member
Oct 3, 2016
1
5
I spent some time trying to figure out how to make my old G3 autoboot on charger so I could use it like a navigator in a car.
So here you go:
Patient: LG G3 D850 MM 6.0 30A
Requirements: rooted device.

in a nutshell - add following bold lines into the section [INIT|_CHARGING] of the /system/vendor/etc/chargerimages/chargerlogo.ini
[INIT_CHARGING]
POWER_OFF = NOT_CONNECTED_BL_LOW
REBOOT = NOT_CONNECTED_BL_NOT_LOW
NOT_BOOT_CHARGING = CHARGING_BL_LOW
NOT_BOOT_CHARGING = NOT_CHARGING_BL_LOW
NORMAL_CHARGING = CHARGING_BL_MID
NORMAL_CHARGING = NOT_CHARGING_BL_MID
FULL_CHARGING = CHARGING_BL_MAX
FULL_CHARGING = CHARGING_FULL
FULL_CHARGING = NOT_CHARGING_BL_MAX
WARNING_TEMPERATURE_BL_LOW = COLD_OVERHEAT_BL_LOW
WARNING_TEMPERATURE_BL_NOT_LOW = COLD_OVERHEAT_BL_NOT_LOW
INSERT_BATTERY = NOT_EXIST_BATTERY
WIRELESS_NOT_BOOT_CHARGING = CHARGING_WIRELESS_BL_LOW
REBOOT = CHARGING_WIRELESS_BL_NOT_LOW
INVALID_BATTERY = INVAILD_BATTERY_BL_LOW
INVALID_BATTERY = INVAILD_BATTERY_BL_NOT_LOW
DUMMY_BATTERY = DUMMY_BATTERY_BL_NONE
REBOOT = CHARGING_BL_LOW
REBOOT = CHARGING_BL_MID
REBOOT = CHARGING_BL_MAX
REBOOT = CHARGING_FULL

REBOOT = AUTOBOOT

More detailed steps:

adb pull /system/vendor/etc/chargerimages/chargerlogo.ini ./chargerlogo.ini
add the lines into chargerlogo.ini
adb push ./chargerlogo.ini /sdcard/chargerlogo.ini
adb shell
adb su
mount -o rw,remount,rw /system
cp /sdcard/chargerlogo.ini /system/vendor/etc/chargerimages/chargerlogo.ini
reboot

btw, if you are not familiar with all that stuff, you can just simulate event 'NOT_CONNECTED_BL_NOT_LOW' to power it up without touching power button:
- power on the car.
- wait 2-3 sec for static battery logo appeared.
- power off the car for 2-3 secs and you can power on/start engine right after that.
- LG will start in a few seconds.
 
Last edited:

TheMadScientist

Recognized Contributor
I spent some time trying to figure out how to make my old G3 autoboot on charger so I could use it like a navigator in a car.
So here you go:
Patient: LG G3 D850 MM 6.0 30A
Requirements: rooted device.

in a nutshell - add following bold lines into the section [INIT|_CHARGING] of the /system/vendor/etc/chargerimages/chargerlogo.ini
[INIT_CHARGING]
POWER_OFF = NOT_CONNECTED_BL_LOW
REBOOT = NOT_CONNECTED_BL_NOT_LOW
NOT_BOOT_CHARGING = CHARGING_BL_LOW
NOT_BOOT_CHARGING = NOT_CHARGING_BL_LOW
NORMAL_CHARGING = CHARGING_BL_MID
NORMAL_CHARGING = NOT_CHARGING_BL_MID
FULL_CHARGING = CHARGING_BL_MAX
FULL_CHARGING = CHARGING_FULL
FULL_CHARGING = NOT_CHARGING_BL_MAX
WARNING_TEMPERATURE_BL_LOW = COLD_OVERHEAT_BL_LOW
WARNING_TEMPERATURE_BL_NOT_LOW = COLD_OVERHEAT_BL_NOT_LOW
INSERT_BATTERY = NOT_EXIST_BATTERY
WIRELESS_NOT_BOOT_CHARGING = CHARGING_WIRELESS_BL_LOW
REBOOT = CHARGING_WIRELESS_BL_NOT_LOW
INVALID_BATTERY = INVAILD_BATTERY_BL_LOW
INVALID_BATTERY = INVAILD_BATTERY_BL_NOT_LOW
DUMMY_BATTERY = DUMMY_BATTERY_BL_NONE
REBOOT = CHARGING_BL_LOW
REBOOT = CHARGING_BL_MID
REBOOT = CHARGING_BL_MAX
REBOOT = CHARGING_FULL

REBOOT = AUTOBOOT

More detailed steps:

adb pull /system/vendor/etc/chargerimages/chargerlogo.ini ./chargerlogo.ini
add the lines into chargerlogo.ini
adb push ./chargerlogo.ini /sdcard/chargerlogo.ini
adb shell
adb su
mount -o rw,remount,rw /system
cp /sdcard/chargerlogo.ini ./chargerlogo.ini
reboot

btw, if you are not familiar with all that stuff, you can just simulate event 'NOT_CONNECTED_BL_NOT_LOW' to power it up without touching power button:
- power on the car.
- wait 2-3 sec for static battery logo appeared.
- power off the car for 2-3 secs and you can power on/start engine right after that.
- LG will start in a few seconds.

Nice....
I have had to do similar to my tablets I run in my cars dash
 

mistic5624

New member
Oct 6, 2017
2
0
I spent some time trying to figure out how to make my old G3 autoboot on charger so I could use it like a navigator in a car.
So here you go:
Patient: LG G3 D850 MM 6.0 30A
Requirements: rooted device.

in a nutshell - add following bold lines into the section [INIT|_CHARGING] of the /system/vendor/etc/chargerimages/chargerlogo.ini
[INIT_CHARGING]
POWER_OFF = NOT_CONNECTED_BL_LOW
REBOOT = NOT_CONNECTED_BL_NOT_LOW
NOT_BOOT_CHARGING = CHARGING_BL_LOW
NOT_BOOT_CHARGING = NOT_CHARGING_BL_LOW
NORMAL_CHARGING = CHARGING_BL_MID
NORMAL_CHARGING = NOT_CHARGING_BL_MID
FULL_CHARGING = CHARGING_BL_MAX
FULL_CHARGING = CHARGING_FULL
FULL_CHARGING = NOT_CHARGING_BL_MAX
WARNING_TEMPERATURE_BL_LOW = COLD_OVERHEAT_BL_LOW
WARNING_TEMPERATURE_BL_NOT_LOW = COLD_OVERHEAT_BL_NOT_LOW
INSERT_BATTERY = NOT_EXIST_BATTERY
WIRELESS_NOT_BOOT_CHARGING = CHARGING_WIRELESS_BL_LOW
REBOOT = CHARGING_WIRELESS_BL_NOT_LOW
INVALID_BATTERY = INVAILD_BATTERY_BL_LOW
INVALID_BATTERY = INVAILD_BATTERY_BL_NOT_LOW
DUMMY_BATTERY = DUMMY_BATTERY_BL_NONE
REBOOT = CHARGING_BL_LOW
REBOOT = CHARGING_BL_MID
REBOOT = CHARGING_BL_MAX
REBOOT = CHARGING_FULL

REBOOT = AUTOBOOT

More detailed steps:

adb pull /system/vendor/etc/chargerimages/chargerlogo.ini ./chargerlogo.ini
add the lines into chargerlogo.ini
adb push ./chargerlogo.ini /sdcard/chargerlogo.ini
adb shell
adb su
mount -o rw,remount,rw /system
cp /sdcard/chargerlogo.ini /system/vendor/etc/chargerimages/chargerlogo.ini
reboot

btw, if you are not familiar with all that stuff, you can just simulate event 'NOT_CONNECTED_BL_NOT_LOW' to power it up without touching power button:
- power on the car.
- wait 2-3 sec for static battery logo appeared.
- power off the car for 2-3 secs and you can power on/start engine right after that.
- LG will start in a few seconds.



When i try to copy i always get an error saying "tmp-mksh: /sdcard/chargerlogo.ini: not found" even though when i do a ls i see the file sitting there

127|[email protected]:/ $ ls -l /sdcard/
ls -l /sdcard/
drwxrwx--- root sdcard_r 2014-12-31 19:08 Alarms
drwxrwx--x root sdcard_r 2017-12-10 20:12 Android
drwxrwx--- root sdcard_r 2018-12-11 08:46 AutoGuard
drwxrwx--- root sdcard_r 2014-12-31 19:08 DCIM
drwxrwx--- root sdcard_r 2018-12-30 03:02 Download
drwxrwx--- root sdcard_r 2014-12-31 19:08 LGBackup
drwxrwx--- root sdcard_r 2014-12-31 19:08 Movies
drwxrwx--- root sdcard_r 2014-12-31 19:08 Music
drwxrwx--- root sdcard_r 2014-12-31 19:08 Notifications
drwxrwx--- root sdcard_r 2017-12-25 08:32 Pictures
drwxrwx--- root sdcard_r 2014-12-31 19:08 Podcasts
drwxrwx--- root sdcard_r 2014-12-31 19:09 Ringtones
drwxrwx--- root sdcard_r 2017-12-21 01:16 Tasker
drwxrwx--- root sdcard_r 2018-11-16 02:00 WhatsApp
drwxrwx--- root sdcard_r 2017-12-23 01:55 backups
-rwxrwx--- root sdcard_r 2925 2018-12-30 09:37 chargerlogo.ini
drwxrwx--- root sdcard_r 2017-12-10 07:13 media
drwxrwx--- root sdcard_r 2017-12-10 07:13 smartconfig
 

Trakost

Senior Member
Feb 19, 2013
137
10
I spent some time trying to figure out how to make my old G3 autoboot on charger so I could use it like a navigator in a car.
So here you go:
Patient: LG G3 D850 MM 6.0 30A
Requirements: rooted device.

in a nutshell - add following bold lines into the section [INIT|_CHARGING] of the /system/vendor/etc/chargerimages/chargerlogo.ini
[INIT_CHARGING]
POWER_OFF = NOT_CONNECTED_BL_LOW
REBOOT = NOT_CONNECTED_BL_NOT_LOW
NOT_BOOT_CHARGING = CHARGING_BL_LOW
NOT_BOOT_CHARGING = NOT_CHARGING_BL_LOW
NORMAL_CHARGING = CHARGING_BL_MID
NORMAL_CHARGING = NOT_CHARGING_BL_MID
FULL_CHARGING = CHARGING_BL_MAX
FULL_CHARGING = CHARGING_FULL
FULL_CHARGING = NOT_CHARGING_BL_MAX
WARNING_TEMPERATURE_BL_LOW = COLD_OVERHEAT_BL_LOW
WARNING_TEMPERATURE_BL_NOT_LOW = COLD_OVERHEAT_BL_NOT_LOW
INSERT_BATTERY = NOT_EXIST_BATTERY
WIRELESS_NOT_BOOT_CHARGING = CHARGING_WIRELESS_BL_LOW
REBOOT = CHARGING_WIRELESS_BL_NOT_LOW
INVALID_BATTERY = INVAILD_BATTERY_BL_LOW
INVALID_BATTERY = INVAILD_BATTERY_BL_NOT_LOW
DUMMY_BATTERY = DUMMY_BATTERY_BL_NONE
REBOOT = CHARGING_BL_LOW
REBOOT = CHARGING_BL_MID
REBOOT = CHARGING_BL_MAX
REBOOT = CHARGING_FULL

REBOOT = AUTOBOOT

More detailed steps:

adb pull /system/vendor/etc/chargerimages/chargerlogo.ini ./chargerlogo.ini
add the lines into chargerlogo.ini
adb push ./chargerlogo.ini /sdcard/chargerlogo.ini
adb shell
adb su
mount -o rw,remount,rw /system
cp /sdcard/chargerlogo.ini /system/vendor/etc/chargerimages/chargerlogo.ini
reboot

btw, if you are not familiar with all that stuff, you can just simulate event 'NOT_CONNECTED_BL_NOT_LOW' to power it up without touching power button:
- power on the car.
- wait 2-3 sec for static battery logo appeared.
- power off the car for 2-3 secs and you can power on/start engine right after that.
- LG will start in a few seconds.


Could you please upload the "chargerimages" folder? After having flashed a ROM I do not have it :/
 

sagownik1982

New member
Apr 11, 2017
1
0
Folder location

Hi, I cant find this folder. My current ROM is Lingeage OS 16 android 9. Are you Know where to look tis folder? Many thanks
 

Pumpkin_PL

New member
Mar 11, 2019
1
0
Thanks for sollution.
My LG G2 Mini now AutoBoot after plug charger :)
I use ES File Explorer to edit "chargerlogo.ini" and after save it's work perfect.
 
Feb 12, 2018
39
0
44
Buenos Aires
Hi. I have modified the chargerlogo.ini. Works well after battery charge is less than 100%
When the battery is at 100% the autoboot does not work.
Could someone help me to solve this problem?
Thank you
Alexander
 

marco0608

New member
Oct 14, 2021
3
0
I spent some time trying to figure out how to make my old G3 autoboot on charger so I could use it like a navigator in a car.
So here you go:
Patient: LG G3 D850 MM 6.0 30A
Requirements: rooted device.

in a nutshell - add following bold lines into the section [INIT|_CHARGING] of the /system/vendor/etc/chargerimages/chargerlogo.ini
[INIT_CHARGING]
POWER_OFF = NOT_CONNECTED_BL_LOW
REBOOT = NOT_CONNECTED_BL_NOT_LOW
NOT_BOOT_CHARGING = CHARGING_BL_LOW
NOT_BOOT_CHARGING = NOT_CHARGING_BL_LOW
NORMAL_CHARGING = CHARGING_BL_MID
NORMAL_CHARGING = NOT_CHARGING_BL_MID
FULL_CHARGING = CHARGING_BL_MAX
FULL_CHARGING = CHARGING_FULL
FULL_CHARGING = NOT_CHARGING_BL_MAX
WARNING_TEMPERATURE_BL_LOW = COLD_OVERHEAT_BL_LOW
WARNING_TEMPERATURE_BL_NOT_LOW = COLD_OVERHEAT_BL_NOT_LOW
INSERT_BATTERY = NOT_EXIST_BATTERY
WIRELESS_NOT_BOOT_CHARGING = CHARGING_WIRELESS_BL_LOW
REBOOT = CHARGING_WIRELESS_BL_NOT_LOW
INVALID_BATTERY = INVAILD_BATTERY_BL_LOW
INVALID_BATTERY = INVAILD_BATTERY_BL_NOT_LOW
DUMMY_BATTERY = DUMMY_BATTERY_BL_NONE
REBOOT = CHARGING_BL_LOW
REBOOT = CHARGING_BL_MID
REBOOT = CHARGING_BL_MAX
REBOOT = CHARGING_FULL

REBOOT = AUTOBOOT

More detailed steps:

adb pull /system/vendor/etc/chargerimages/chargerlogo.ini ./chargerlogo.ini
add the lines into chargerlogo.ini
adb push ./chargerlogo.ini /sdcard/chargerlogo.ini
adb shell
adb su
mount -o rw,remount,rw /system
cp /sdcard/chargerlogo.ini /system/vendor/etc/chargerimages/chargerlogo.ini
reboot


btw, if you are not familiar with all that stuff, you can just simulate event 'NOT_CONNECTED_BL_NOT_LOW' to power it up without touching power button:
- power on the car.
- wait 2-3 sec for static battery logo appeared.
- power off the car for 2-3 secs and you can power on/start engine right after that.
- LG will start in a few seconds.
Hello,
I reopen the post because I try to autoboot my Lg g2 mini on charger. I have add:
REBOOT = CHARGING_BL_LOW
REBOOT = CHARGING_BL_MID
REBOOT = CHARGING_BL_MAX
REBOOT = CHARGING_FULL

after "DUMMY_BATTERY = DUMMY_BATTERY_BL_NONE" but smartphone doesn't autoboot when charger is plug.

My question is: I just need to insert
REBOOT = CHARGING_BL_LOW
REBOOT = CHARGING_BL_MID
REBOOT = CHARGING_BL_MAX
REBOOT = CHARGING_FULL

in the file chargerlogo.ini, or I need to do something else?

This steps how and where can i use it? Otherwise: what they are for and where I need to use them?
adb pull /system/vendor/etc/chargerimages/chargerlogo.ini ./chargerlogo.ini
add the lines into chargerlogo.ini
adb push ./chargerlogo.ini /sdcard/chargerlogo.ini
adb shell
adb su
mount -o rw,remount,rw /system
cp /sdcard/chargerlogo.ini /system/vendor/etc/chargerimages/chargerlogo.ini
reboot

Thanks
 

marco0608

New member
Oct 14, 2021
3
0
Thanks for sollution.
My LG G2 Mini now AutoBoot after plug charger :)
I use ES File Explorer to edit "chargerlogo.ini" and after save it's work perfect.
Hi, you added just this'?
REBOOT = CHARGING_BL_LOW
REBOOT = CHARGING_BL_MID
REBOOT = CHARGING_BL_MAX
REBOOT = CHARGING_FULL

because my lg g2 mini doesn't boot automatically after charger. Any suggestion? Thanks
 

marco0608

New member
Oct 14, 2021
3
0
Hi, you added just this'?
REBOOT = CHARGING_BL_LOW
REBOOT = CHARGING_BL_MID
REBOOT = CHARGING_BL_MAX
REBOOT = CHARGING_FULL

because my lg g2 mini doesn't boot automatically after charger. Any suggestion? Thanks
Yes, work now. I don't know because I didn't try yet, but I think that you can try to stop charge at 99%.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 5
    I spent some time trying to figure out how to make my old G3 autoboot on charger so I could use it like a navigator in a car.
    So here you go:
    Patient: LG G3 D850 MM 6.0 30A
    Requirements: rooted device.

    in a nutshell - add following bold lines into the section [INIT|_CHARGING] of the /system/vendor/etc/chargerimages/chargerlogo.ini
    [INIT_CHARGING]
    POWER_OFF = NOT_CONNECTED_BL_LOW
    REBOOT = NOT_CONNECTED_BL_NOT_LOW
    NOT_BOOT_CHARGING = CHARGING_BL_LOW
    NOT_BOOT_CHARGING = NOT_CHARGING_BL_LOW
    NORMAL_CHARGING = CHARGING_BL_MID
    NORMAL_CHARGING = NOT_CHARGING_BL_MID
    FULL_CHARGING = CHARGING_BL_MAX
    FULL_CHARGING = CHARGING_FULL
    FULL_CHARGING = NOT_CHARGING_BL_MAX
    WARNING_TEMPERATURE_BL_LOW = COLD_OVERHEAT_BL_LOW
    WARNING_TEMPERATURE_BL_NOT_LOW = COLD_OVERHEAT_BL_NOT_LOW
    INSERT_BATTERY = NOT_EXIST_BATTERY
    WIRELESS_NOT_BOOT_CHARGING = CHARGING_WIRELESS_BL_LOW
    REBOOT = CHARGING_WIRELESS_BL_NOT_LOW
    INVALID_BATTERY = INVAILD_BATTERY_BL_LOW
    INVALID_BATTERY = INVAILD_BATTERY_BL_NOT_LOW
    DUMMY_BATTERY = DUMMY_BATTERY_BL_NONE
    REBOOT = CHARGING_BL_LOW
    REBOOT = CHARGING_BL_MID
    REBOOT = CHARGING_BL_MAX
    REBOOT = CHARGING_FULL

    REBOOT = AUTOBOOT

    More detailed steps:

    adb pull /system/vendor/etc/chargerimages/chargerlogo.ini ./chargerlogo.ini
    add the lines into chargerlogo.ini
    adb push ./chargerlogo.ini /sdcard/chargerlogo.ini
    adb shell
    adb su
    mount -o rw,remount,rw /system
    cp /sdcard/chargerlogo.ini /system/vendor/etc/chargerimages/chargerlogo.ini
    reboot

    btw, if you are not familiar with all that stuff, you can just simulate event 'NOT_CONNECTED_BL_NOT_LOW' to power it up without touching power button:
    - power on the car.
    - wait 2-3 sec for static battery logo appeared.
    - power off the car for 2-3 secs and you can power on/start engine right after that.
    - LG will start in a few seconds.
    1
    was looking for this, could only find nexus and Samsung devices. Thanks a million