[LG G4S ] [LG G4 Beat ] [H735] World first root / works on other LG devices also

[konsolen]

LG Spirit H440n 5.0.1 latest version cannot be rooted with kingroot. Do you think I should give your method a try? Which kdz should I use? One of my own?

Edit: I think there has been some mistake and the command is "Send_Command.exe" and not "SendCommand.exe".

Alright. I did the LG FlashTool method with the COM 4 Green letters showing in phone and what I get is:

C:\Users\myusernamehere\Desktop\root>Send_Command.exe \\.\COM4 < rootworm
Author : blog.lvu.kr
SPECIAL COMMAND : ENTER, LEAVE

####

I see my script no on many websites and with good results.
If 5.0.1 is working, i cant say for sure.
The Problem like you postet, you must type ctrl+c to get out of this stage and check your drivers. If phone will get plug off and on, we must renew lg drivers. Everytime.
Then you type Send command to your come port and start the root.

 

[polfrank]

I see my script no on many websites and with good results.
If 5.0.1 is working, i cant say for sure.
The Problem like you postet, you must type ctrl+c to get out of this stage and check your drivers. If phone will get plug off and on, we must renew lg drivers. Everytime.
Then you type Send command to your come port and start the root.

What do you mean by "renew LG drivers" ? Reinstall them at this point?

Edit: I just disabled and enabled the device that had the yellow triangle in the device manager and the yellow triangle was not there anymore. But the send command didn't work again.. This is what I wrote:

C:\Users\myusername\Desktop\New folder>Push_File.exe \\.\COM4 busybox /system/xbin/busybox
Author : blog.lvu.kr
File : busybox
Path : /system/xbin/busybox

UNLK : FAIL
OPEN : FAIL
TOT FileSize : 1048328

SendStart
WRTE : FAIL1048328byte sent

CLSE: CLSE
C:\Users\myusername\Desktop\New folder>Push_File.exe \\.\COM4 rootworm.sh /data/local/tmp/rootworm.sh
Author : blog.lvu.kr
File : rootworm.sh
Path : /data/local/tmp/rootworm.sh

UNLK : FAIL
OPEN : FAIL
TOT FileSize : 9410

SendStart
WRTE : FAIL9410byte sent

CLSE: CLSE
C:\Users\myusername\Desktop\New folder>Push_File.exe \\.\COM4 UPDATE-SuperSU-v2.46.zip /data/local/tmp/UPDATE-SuperSU-v2.46.zip
Author : blog.lvu.kr
File : UPDATE-SuperSU-v2.46.zip
Path : /data/local/tmp/UPDATE-SuperSU-v2.46.zip

UNLK : FAIL
OPEN : FAIL
TOT FileSize : 4019040

SendStart
WRTE : FAIL4019040byte sent

CLSE: CLSE
C:\Users\myusername\Desktop\New folder>Send_Command.exe \\.\COM4
Author : blog.lvu.kr
SPECIAL COMMAND : ENTER, LEAVE

#ls
FAIL
#sh /data/local/tmp/rootworm.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zip /system/xbin/busybox
#

 

[MZKiller86]

I have a problem, i installed that but my phone can't start he stay on the lg logo plz help me ='(

 

[muhammed2079]

I found the cause of the problem yellow triangle . drivers are okay , but I 'm getting this problem you can help

 

[dreamnoob]

yup right now my prob is probably the yellow triangle aswell

 

[meangreenie]

killing adb.exe in task manager might help too before reconnecting

 

[dreamnoob]

killing adb.exe in task manager might help too before reconnecting

oh u managed to root it?

dont have adb.exe tho.. but i know i have fastboot and adb installed

 

[polfrank]

killing adb.exe in task manager might help too before reconnecting

I tried it but the sh command didn't work again

Also:

#ls /data/local/tmp/ ----> gives me the contents

#ls /system/xbin ----> doesn't give me the contents (nothing listed)

 

[konsolen]

What do you mean by "renew LG drivers" ? Reinstall them at this point?

Edit: I just disabled and enabled the device that had the yellow triangle in the device manager and the yellow triangle was not there anymore. But the send command didn't work again.. This is what I wrote:

C:\Users\myusername\Desktop\New folder>Push_File.exe \\.\COM4 busybox /system/xbin/busybox
Author : blog.lvu.kr
File : busybox
Path : /system/xbin/busybox

UNLK : FAIL
OPEN : FAIL
TOT FileSize : 1048328

SendStart
WRTE : FAIL1048328byte sent

CLSE: CLSE
C:\Users\myusername\Desktop\New folder>Push_File.exe \\.\COM4 rootworm.sh /data/local/tmp/rootworm.sh
Author : blog.lvu.kr
File : rootworm.sh
Path : /data/local/tmp/rootworm.sh

UNLK : FAIL
OPEN : FAIL
TOT FileSize : 9410

SendStart
WRTE : FAIL9410byte sent

CLSE: CLSE
C:\Users\myusername\Desktop\New folder>Push_File.exe \\.\COM4 UPDATE-SuperSU-v2.46.zip /data/local/tmp/UPDATE-SuperSU-v2.46.zip
Author : blog.lvu.kr
File : UPDATE-SuperSU-v2.46.zip
Path : /data/local/tmp/UPDATE-SuperSU-v2.46.zip

UNLK : FAIL
OPEN : FAIL
TOT FileSize : 4019040

SendStart
WRTE : FAIL4019040byte sent

CLSE: CLSE
C:\Users\myusername\Desktop\New folder>Send_Command.exe \\.\COM4
Author : blog.lvu.kr
SPECIAL COMMAND : ENTER, LEAVE

#ls
FAIL
#sh /data/local/tmp/rootworm.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zip /system/xbin/busybox
#

Then is your port not open!

 

[konsolen]

I tried it but the sh command didn't work again

Also:

#ls /data/local/tmp/ ----> gives me the contents

#ls /system/xbin ----> doesn't give me the contents (nothing listed)

then type the push command to place it in xbin.

 

[konsolen]

I have a problem, i installed that but my phone can't start he stay on the lg logo plz help me ='(

Then you wait to long to pull the usb and lg flashtool was starting to write.
If you get the long list during the root process, then is 100% a wrong disconnect.

 

[konsolen]

What do you mean by "renew LG drivers" ? Reinstall them at this point?

Edit: I just disabled and enabled the device that had the yellow triangle in the device manager and the yellow triangle was not there anymore. But the send command didn't work again.. This is what I wrote:

C:\Users\myusername\Desktop\New folder>Push_File.exe \\.\COM4 busybox /system/xbin/busybox
Author : blog.lvu.kr
File : busybox
Path : /system/xbin/busybox

UNLK : FAIL
OPEN : FAIL
TOT FileSize : 1048328

SendStart
WRTE : FAIL1048328byte sent

CLSE: CLSE
C:\Users\myusername\Desktop\New folder>Push_File.exe \\.\COM4 rootworm.sh /data/local/tmp/rootworm.sh
Author : blog.lvu.kr
File : rootworm.sh
Path : /data/local/tmp/rootworm.sh

UNLK : FAIL
OPEN : FAIL
TOT FileSize : 9410

SendStart
WRTE : FAIL9410byte sent

CLSE: CLSE
C:\Users\myusername\Desktop\New folder>Push_File.exe \\.\COM4 UPDATE-SuperSU-v2.46.zip /data/local/tmp/UPDATE-SuperSU-v2.46.zip
Author : blog.lvu.kr
File : UPDATE-SuperSU-v2.46.zip
Path : /data/local/tmp/UPDATE-SuperSU-v2.46.zip

UNLK : FAIL
OPEN : FAIL
TOT FileSize : 4019040

SendStart
WRTE : FAIL4019040byte sent

CLSE: CLSE
C:\Users\myusername\Desktop\New folder>Send_Command.exe \\.\COM4
Author : blog.lvu.kr
SPECIAL COMMAND : ENTER, LEAVE

#ls
FAIL
#sh /data/local/tmp/rootworm.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zip /system/xbin/busybox
#

No, thats wrong to disable and enable the device. this doenst work. I write on the first site at the point to renew the driver. Device Manager open and on the yellow device install driver from pc.Click the correct lg driver. Then yellow is gone.

 

[konsolen]

I found the cause of the problem yellow triangle . drivers are okay , but I 'm getting this problem you can help

you did reinstall the driver?

 

[prosilu]

almost

same thing like a dreamnoob
please press Ctrl + c, and then type N and enter to reboot
"N is not recognized as an internal or external command, operable program or batch file."

 

[muhammed2079]

you did reinstall the driver?

yes diriver is refresh

 

[SkylinerGTR]

Hi, I have LG G4S but not H735. In my country it's H736. I can't find firmware kdz for it. Do you have firmware for it?

 

[PsychoKilla666]

I'm also wondering if this method works for G4 Beat H736P? Should it work in theory? Is there any danger?
Does anyone know of an forum/post that specializes in the G4 Beat H736P?

 

[polfrank]

I have made some progress. Now, all "ls" commands give me results, and this is good. Even "ls /system/xbin/" gives me results.

But, it seems I can write inside /data folder but not in /system. The Push_File.exe commands work, except the /system/xbin/busybox one. After this, if I type "ls /system/xbin" I cannot see busybox in the list, which means nothing was writen by me in the /system folder.

Also, if i try "dd"commadns to copy files around the folders with Send_Command.exe, I cannot write to system, also. Any idea of what's happening?

 

[prosilu]

please

you did reinstall the driver?

you can make a video? none of us here has been able to root your device , I think it would be easier if you make a video . Thank you

 

[xsteacy]

Almost....

Stuck at LG logo when rebooting...

1. Opened the port

2. Pushed the files:
Push_File.exe \\.\COM? busybox /system/xbin/busybox
Push_File.exe \\.\COM? rootworm.sh /data/local/tmp/rootworm.sh
Push_File.exe \\.\COM? UPDATE-SuperSU-v2.46.zip /data/local/tmp/UPDATE-SuperSU-v2.46.zip

3. Didn't work

4. Pushed your SU, that you posted somewhere here.
Push_file.exe \\.\COM? su /system/xbin/su

5. Did again:
sh /data/local/tmp/rootworm.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zip /system/xbin/busybox

6. Worked

7. This is a copy/paste of the command line used:

C:\Users\Steacy\Desktop\lgroot>Send_Command.exe \\.\COM3
Author : blog.lvu.kr
SPECIAL COMMAND : ENTER, LEAVE

#ls
build.prop
cache
charger
data
default.prop
dev
etc
file_contexts
fota.fstab
fstab.laf
fstab.p1bssn
init
init.class_main.sh
init.epsilon0c.crash.sh
init.laf.spr.usb.rc
init.laf.usb.rc
init.lge.cmm.usb.sh
init.lge.usb.sh
init.mdm.sh
init.mid.rc
init.mid_64.rc
init.qcom.class_core.sh
init.qcom.early_boot.sh
init.qcom.factory.sh
init.qcom.sh
init.qcom.ssr.sh
init.qcom.syspart_fixup.sh
init.rc
init.recovery.p1bssn.rc
lgdms.fota.rc
lgdms.fota_update.rc
persist
persist-lg
proc
property_contexts
res
root
sbin
sdcard
seapp_contexts
selinux_version
sepolicy
service_contexts
set_emmc_size.sh
sns
storage
sys
system
tmp
ueventd.p1bssn.rc
ueventd.rc
##sh /data/local/tmp/rootworm.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zi
p /system/xbin/busybox
#Push_File.exe \\.\COM3 busybox /system/xbin/busybox
#Push_File.exe \\.\COM3 rootworm.sh /data/local/tmp/rootworm.sh
#Push_File.exe \\.\COM3 UPDATE-SuperSU-v2.46.zip /data/local/tmp/UPDATE-SuperSU-
v2.46.zip
##sh /data/local/tmp/rootworm.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zi
p /system/xbin/busybox
#Push_file.exe \\.\COM3 su /system/xbin/su
#sh /data/local/tmp/rootworm.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zip
/system/xbin/busybox
ui_print *****************
ui_print *****************
ui_print - Mounting /system, /data and rootfs
ui_print - Extracting files
ui_print - Disabling OTA survival
ui_print - Removing old files
ui_print - Placing files
ui_print - Post-installation script
ui_print - Unmounting /system and /data
ui_print - Done !

Please press Ctrl+C, and then type N and ENTER to reboot.

#^C
C:\Users\Steacy\Desktop\lgroot>n
'n' is not recognized as an internal or external command,
operable program or batch file.

C:\Users\Steacy\Desktop\lgroot>Send_Command.exe \\.\COM3
Author : blog.lvu.kr
SPECIAL COMMAND : ENTER, LEAVE

#LEAVE