I had the same issue recently - the update went wrong at 91% and after forced reboot the fastboot mode only. Fortunately the phone is under warranty so I reported it and took back already from LGE service. They replaced the mainboard.
I tried this not successful !Octoplus/Octopus LG 2.9.3
Reset FRP Lock
1. Attach testpoint, and connect phone with Micro USB cable (don´t use USB hubs!).
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn´t installed a driver.
3. Release testpoint and press "Reset FRP Lock" button.
Emergency mode
To enter emergency mode, disconnect cable, disconnect battery, press and hold "Vol+" button and connect USB cable.
My lucky day![]()
you're missing the point of this thread. the aim is to recover phones who are stuck in fastboot mode without download mode, phones bricked by LGUP, with wrong dlls or who knows why, phones who lost download mode.Cross flash back to stock Oreo and try again.
Sent from my LM-G710VM using XDA Labs
Any service what do you recomend? I need a remote service, because in my country ( Chile ) we dont have medusa. Thanks.The effective solution to resolve the problem is with medusa pro box, if you don't have access to one, consider a remote service.
I fix my G710PM with mesuda pro box.
In youtube, https://www.youtube.com/watch?v=WTEKoCtOZdw , But I fix my phone in my country, not remote, you can contact in whatsapp. I don't know if it's reliableAny service what do you recomend? I need a remote service, because in my country ( Chile ) we dont have medusa. Thanks.
I just lost my g7's download modeyou're missing the point of this thread. the aim is to recover phones who are stuck in fastboot mode without download mode, phones bricked by LGUP, with wrong dlls or who knows why, phones who lost download mode.
I had the very same problem as OP. I tried to install pie with LGUP (G710EM20b_00_OPEN_EU_OP_0508.kdz) but ended in fastboot loop.
After whole night of trying different things (being a noob means less sleep) I managed to run the phone in download mode. Starting from there I was able to install my previous rom. Both failed update and rescue operations were done on Win 10.
What I tried and didn't work:
- Fastboot --set-active=a
- Unlocking with unlock.bin. Didn't save the msg but saw it somewhere in another thread. I needed to install/point drivers first because the device was not recognized in Win.Code:C:\ADB>Fastboot --set-active=a Setting current slot to 'a'... FAILED (remote: Slot Change is not allowed in Lock State) finished. total time: 0.003s
- Solutions for G6 for going into download mode. The download mode icon was displayed for a second and then going to fastboot again.
- LG Flash Tool 2014 - I just followed a guide for older phones but it didn't work. Didn't try again.
What did work:
1. I found this post on reddit (remove spaces or PM me, I'm not allowed to post links):Quoting the postCode:https:// www .reddit. com/r/LGG3/comments/2qe5sr/in_need_of_serious_help_stuck_in_fastbootno/cn5f2qr/?utm_source=share&utm_medium=web2x
2. I used LG_Firmware_Extract_v1.2.6.1 and extracted dz file from aforementioned pie file. The I extracted two laf files for the kz file. In my case they were: laf.img_180534 and laf.img_81990.
3. I took one of these files (sry, don't remember which one, but they have the same size - didn't check if they're the same) renamed it to laf.img and put a folder where fastboot.exe is.
4. I didand voila: the phone was in download mode!Code:fastboot boot laf.img
5. After that LGUP the previous rom and the phone is working again. Here I needed few tries. At first the were some problems, then I tried different combinations (1.14, 1.15, w/ and w/o uppercut). I think LGUP 1.15 (1.14 with patch) did the work. I was able to "refurbish" the phone.
Hope it's useful for others. If anyone could prepare a guide from this description or/and tell why it worked - please feel free to do so.
I think I will wait some time before trying pie again![]()
Hey man, after I tried both laf files I got the message "Your device failed a routine safety check" and reboots to fastboot after a while. Can you help me out?I had the very same problem as OP. I tried to install pie with LGUP (G710EM20b_00_OPEN_EU_OP_0508.kdz) but ended in fastboot loop.
After whole night of trying different things (being a noob means less sleep) I managed to run the phone in download mode. Starting from there I was able to install my previous rom. Both failed update and rescue operations were done on Win 10.
What I tried and didn't work:
- Fastboot --set-active=a
- Unlocking with unlock.bin. Didn't save the msg but saw it somewhere in another thread. I needed to install/point drivers first because the device was not recognized in Win.Code:C:\ADB>Fastboot --set-active=a Setting current slot to 'a'... FAILED (remote: Slot Change is not allowed in Lock State) finished. total time: 0.003s
- Solutions for G6 for going into download mode. The download mode icon was displayed for a second and then going to fastboot again.
- LG Flash Tool 2014 - I just followed a guide for older phones but it didn't work. Didn't try again.
What did work:
1. I found this post on reddit (remove spaces or PM me, I'm not allowed to post links):Quoting the postCode:https:// www .reddit. com/r/LGG3/comments/2qe5sr/in_need_of_serious_help_stuck_in_fastbootno/cn5f2qr/?utm_source=share&utm_medium=web2x
2. I used LG_Firmware_Extract_v1.2.6.1 and extracted dz file from aforementioned pie file. The I extracted two laf files for the kz file. In my case they were: laf.img_180534 and laf.img_81990.
3. I took one of these files (sry, don't remember which one, but they have the same size - didn't check if they're the same) renamed it to laf.img and put a folder where fastboot.exe is.
4. I didand voila: the phone was in download mode!Code:fastboot boot laf.img
5. After that LGUP the previous rom and the phone is working again. Here I needed few tries. At first the were some problems, then I tried different combinations (1.14, 1.15, w/ and w/o uppercut). I think LGUP 1.15 (1.14 with patch) did the work. I was able to "refurbish" the phone.
Hope it's useful for others. If anyone could prepare a guide from this description or/and tell why it worked - please feel free to do so.
I think I will wait some time before trying pie again![]()
Right after step 4 I keep gettingI had the very same problem as OP. I tried to install pie with LGUP (G710EM20b_00_OPEN_EU_OP_0508.kdz) but ended in fastboot loop.
After whole night of trying different things (being a noob means less sleep) I managed to run the phone in download mode. Starting from there I was able to install my previous rom. Both failed update and rescue operations were done on Win 10.
What I tried and didn't work:
- Fastboot --set-active=a
- Unlocking with unlock.bin. Didn't save the msg but saw it somewhere in another thread. I needed to install/point drivers first because the device was not recognized in Win.Code:C:\ADB>Fastboot --set-active=a Setting current slot to 'a'... FAILED (remote: Slot Change is not allowed in Lock State) finished. total time: 0.003s
- Solutions for G6 for going into download mode. The download mode icon was displayed for a second and then going to fastboot again.
- LG Flash Tool 2014 - I just followed a guide for older phones but it didn't work. Didn't try again.
What did work:
1. I found this post on reddit (remove spaces or PM me, I'm not allowed to post links):Quoting the postCode:https:// www .reddit. com/r/LGG3/comments/2qe5sr/in_need_of_serious_help_stuck_in_fastbootno/cn5f2qr/?utm_source=share&utm_medium=web2x
2. I used LG_Firmware_Extract_v1.2.6.1 and extracted dz file from aforementioned pie file. The I extracted two laf files for the kz file. In my case they were: laf.img_180534 and laf.img_81990.
3. I took one of these files (sry, don't remember which one, but they have the same size - didn't check if they're the same) renamed it to laf.img and put a folder where fastboot.exe is.
4. I didand voila: the phone was in download mode!Code:fastboot boot laf.img
5. After that LGUP the previous rom and the phone is working again. Here I needed few tries. At first the were some problems, then I tried different combinations (1.14, 1.15, w/ and w/o uppercut). I think LGUP 1.15 (1.14 with patch) did the work. I was able to "refurbish" the phone.
Hope it's useful for others. If anyone could prepare a guide from this description or/and tell why it worked - please feel free to do so.
I think I will wait some time before trying pie again![]()
Not reliable at all. Left a nasty keylogger virus on my laptops. Fortunately, I have a few old laptops around for testing purposes, so no harm was done. BEWARE!In youtube, https://www.youtube.com/watch?v=WTEKoCtOZdw , But I fix my phone in my country, not remote, you can contact in whatsapp. I don't know if it's reliable