[LG G7] FIX Error 0x2000 LGUP

[seannolo24]

Hi guys, last week i've got a problem with LGUP while installing a KDZ on my LG G7. The error is 0x2000 and it can't complete the flash of KDZ firmware.
After i fix the problem and i create this thread to help you.

1. Download the Official KDZ firmware of LG G7 ( it's a large file ): https://goo.gl/ESWAhb
2. Uninstall LGUP if you have an old version, restart the PC, and install this new version of LGUP: https://goo.gl/GRFHGu
3. Download this ZIP file : https://goo.gl/6idLqN
4. Open the ZIP and copy the DLL file ( named "LGUP_Common.dll" ) in this directory " C:\Program Files (x86)\LG Electronics\LGUP\model\common ". If there isn't the common folder, create it and copy the dll file inside.
5. Now the LGUP program works without any Error.

 

[gavsi]

many many thank my friend works fine thanks again

 

[seannolo24]

many many thank my friend works fine thanks again

No problem. You're welcome

 

[phamloc321]

tks

 

[ASHER JHNAID]

Hi guys, last week i've got a problem with LGUP while installing a KDZ on my LG G7. The error is 0x2000 and it can't complete the flash of KDZ firmware.
After i fix the problem and i create this thread to help you.

1. Download the Official KDZ firmware of LG G7 ( it's a large file ): https://goo.gl/ESWAhb
2. Uninstall LGUP if you have an old version, restart the PC, and install this new version of LGUP: https://goo.gl/GRFHGu
3. Download this ZIP file : https://goo.gl/6idLqN
4. Open the ZIP and copy the DLL file ( named "LGUP_Common.dll" ) in this directory " C:\Program Files (x86)\LG Electronics\LGUP\model\common ". If there isn't the common folder, create it and copy the dll file inside.
5. Now the LGUP program works without any Error.

The DLL File saved life while rolling back to oreo from pie on lg g6. I was getting the error Use the latest dll LAF Protocol version is not match on lg up. The whole scenario in this thread https://forum.xda-developers.com/lg-g6/help/lg-g600k-pie-issues-t3953256

 

[ulalume]

I am trying to upgrade my G7 through LG UP ( as the ota never arrived, and LG Bridge does not work), and although I follow the exact directions mentioned above I still get the 0x2000 error and my update aborts at 75%.
my G7 region is TIM, not sure if this is relevant.. can anyone help?

 

[strglin rn]

Will this LGUP for the G7 work with the G6.? I have tried to replace or make a common folder with the Common.dll file however on booting LGUP version 1.0.28.9 the file becomes replaced with the stock Common.dll file. Any help would be appreciated as I'm trying to get my phone out of a boot loop situation.

 

[ashokmca07]

I am trying to upgrade my G7 through LG UP ( as the ota never arrived, and LG Bridge does not work), and although I follow the exact directions mentioned above I still get the 0x2000 error and my update aborts at 75%.
my G7 region is TIM, not sure if this is relevant.. can anyone help?

Hey, how did you solve this issue? I have same problem. my phone got reset now (just restart and poweroff options)

 

[ulalume]

Long story short, my phone was flashed with a neutral rom (not tim) from the store I bought it, although ot was brand new amd sealed...don't know how, probably in order for them to remove the Tim branding.
So, I reflashed it with it's original tim rom through lg up, the process went smoothly, and it immediately received the new OS update OTA.
Downside is that now I get a Tim startup screen, for which I don't care, and the Tim preinstalled apps, which can all be deactivated, so mo problem there too