• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

LG V60 retail demo unit hard brick recovery

Search This thread

DymokKit

Member
Nov 28, 2021
5
0
Firmware is not compatible with demo fully.
As another Demo, i think it can work with V600N firmware.
Firmware from another models work not correct. For example if my demo lose power(unplug battery or discharge) it forget about start setting, and it make it again like firmware installed again. Someone have v600n from China?
 

James_102

Member
Dec 30, 2018
43
1

ShaniquaLTE

Member
Oct 6, 2021
19
3
LG V60 ThinQ
DISCLAIMER: I am not responsible for any damages this may cause as I am merely translating the guide, I am not responsible for you bricking your device because of a missed step so read carefully,

Also, Please backup your data beforehand as this does wipe the phone.

Requirements

1-LGUP 1.16.0.3 .
2-LG Mobile Driver 4.4.2
3- LG FIRMWARE V600EA20c_00_0526.kdz

!!BE CAREFUL TO DO EXACTLY AS THE INSTRUCTIONS SAY OR YOU WILL BRICK THE PHONE!!!
1. Make a backup .
2.put youR lg v60 demo into Download Mode".

1. Open LGUP.
2. Pick V600EA20c_00_0526.kdz .
3. Select "PARTITION DL".
4. Press Start. And a pop-up window will appear. In this window you can select which partitions to be flashed
5. uncheck these partitions: XBL_A , XBL_B,XBL_CONFIG_A,XBL_CONFIGE_B ,SID_A and SID_B.


after completing the process it will boot up in some minutes .
Hi. I have unlocked bootloader and rooted my demo lg v60 phone. Will this work?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    U need to download firehouse for lg v60. U should be aboe to find it in one of the lgv60 threads . then download QPST if u get a sahara error. launch qfil form qpst folder. There should be a thread on how to set up configuration for qfil. After u set configuration, go to select partition manager in tools. Right click on the partitions u need to flash and select load image. I can give more detail later on if needed.
    I've got it working. Thanks mate
    1
    Its supposed to restart after flash try different cable or usb ports try until it’s says 3
    1
    hi, im another victim of the bricked v60. i managed to boot phone to EDL. but i dont know how to flash with qfil. any help is appreciated
    U need to download firehouse for lg v60. U should be aboe to find it in one of the lgv60 threads . then download QPST if u get a sahara error. launch qfil form qpst folder. There should be a thread on how to set up configuration for qfil. After u set configuration, go to select partition manager in tools. Right click on the partitions u need to flash and select load image. I can give more detail later on if needed.
    1
    Hi I killed my Lg v60 demo. I opened the lid and booted into QFIL. But in partitione managere I have no partitions. Before that, boot. and boot.b were not installed. What can you do about it?
    1
    *#546368#*600# gave me error I mentioned before.
    ##228378 (+ send) did nothing for me (also no idea what it mean)

    I’m using a v601 demo.

    Install hidden menu apk
  • 2
    U need to download firehouse for lg v60. U should be aboe to find it in one of the lgv60 threads . then download QPST if u get a sahara error. launch qfil form qpst folder. There should be a thread on how to set up configuration for qfil. After u set configuration, go to select partition manager in tools. Right click on the partitions u need to flash and select load image. I can give more detail later on if needed.
    I've got it working. Thanks mate
    2
    DISCLAIMER: I am not responsible for any damages this may cause as I am merely translating the guide, I am not responsible for you bricking your device because of a missed step so read carefully,

    Also, Please backup your data beforehand as this does wipe the phone.

    Requirements

    1-LGUP 1.16.0.3 .
    2-LG Mobile Driver 4.4.2
    3- LG FIRMWARE V600EA20c_00_0526.kdz

    !!BE CAREFUL TO DO EXACTLY AS THE INSTRUCTIONS SAY OR YOU WILL BRICK THE PHONE!!!
    1. Make a backup .
    2.put youR lg v60 demo into Download Mode".

    1. Open LGUP.
    2. Pick V600EA20c_00_0526.kdz .
    3. Select "PARTITION DL".
    4. Press Start. And a pop-up window will appear. In this window you can select which partitions to be flashed
    5. uncheck these partitions: XBL_A , XBL_B,XBL_CONFIG_A,XBL_CONFIGE_B ,SID_A and SID_B.


    after completing the process it will boot up in some minutes .
    I confirm this method works. I flashed my phone successfully and i put finger print Sensor it also work great 👍
    Now we need to fix the modem issue I’m waiting to receive receiving Antenna to arrive from china
    2
    do i have flash the files one by one or is there away to flash all
    do i have flash the files one by one or is there away to flash all
    flashing xbl, xbl config a / b and side a / b should turn on
    1
    Hi, bro. Could you please tell me what it is different from a normal V60? Is it only no signal and battery limit? I'm planning on buying one but I'd like to be sure. Thanks in advance.

    I've never found a way to get around the 50% charging capacity though that would make everything far better. I have found a way to rid retail mode and get into security settings, but charging block still remains. No fingerprint sensor, haven't gotten stylus support to work, dual screen DOES work though. Also haven't gotten a software update since March 1, though most carrier devices have.

    I use mine as a WiFi device and enjoy it minus the 50% battery.

    ---------- Post added at 06:34 PM ---------- Previous post was at 06:25 PM ----------

    As far as I know only that. 50% charging can be worked around by charging switched off.

    If you have a guide to get me around the 50% charging, you are god lol I've searched all over and haven't found anything except flashing a different firmware and most experiences I've come across turn out real bad
    1
    Oh this worked. Thank you. No idea why my v60 didn’t have hidden menu installed by default.