It is not supported on LOS. This is not EMUI :laugh:Can't install huwaei backup Error Code: -505
how to solve this please?
I think you reflash emui because in lineage battery drain is very fast and all day phone plugged in charger is not right for our mobile, you're damaging your phone.Does anybody have terrible battery life?
My phone lately cannot survive even 20 minutes without charger. I think that problem is not in old battery (phone is 11 months old), but (probably) software.
Today it was turned off, on charger probably for 2-3 hour and battery was slowly charged to about 95%. After disconnecting charger and using phone for about 10 minutes battery was still at 91%, but phone just turned off.
I can turn it on, battery will show about 85+%, but it will shut off almost immediately. Similar behavior was observed for the past 3-4 weeks (but with other battery percent, but all were over 50%).
I did not try stock ROM in the past 6 or so months, but I remember that I was able to have normal (well, more than 1-2 hour) battery life on alternate ROMs.
There was battery patch on page 4 but it's deleted. Is there something similar what I can try to give my phone more than 10 minutes of life without charger?
Thanks
HiDual Sim switch LTE sim :
=> Lineage switch data will work Only for 3G/2G if set at sim2 (only sim1 can get LTE/4G)
=> You can reverse sim slot number with script include in rom
=> Goto /system/SwitchLTEsim/ (using root browser)
=> Reverse : tap/execute/SwitchLTEsim2 and reboot
sim1 slot will appear at sim2 and sim2 slot at sim1
=> Normal : tap/execute/SwitchLTEsim1 and reboot
sim1 slot will appear at sim1 and sim2 slot at sim2
HOW to use SDcard support for user apps :
*first : i do like that coz i dont like "adoptable storage" too much
1 : Backup your SDcard files on computer
2 : Use TWRP 3.0 and goto :
Advanced/PartitionSD card (choice Micro SDCard) press OK
3 : EXT Size ( choice how many Mo you want to convert to Link apps ) and choose EXT4 file system
4 : Swype to partition will FORMAT your SD to Fat32 + xx Mo to EXT4.
5 : Reboot and open link2SD , allow root access
6 : Do create scripts , choice EXT4 , you will have a error , ignore it !!
7 : Reboot , and now you can use Link2SD to Link apps you want on EXT4.
DO NOT USE iSU to hide root : it will break linked apps
HOW to hide root if needed :
- full version is also a TOOL to change beetwen Xposed and UnXposed:
Exemple : you installed with Xposed but now you need to Snapchat
=>In Aroma disable "Flash rom vX.X and Boot" = system will not be formated
=>In Aroma disable any other option will do nothings .. (you don't need to install Xtra Apps again)
=>In Aroma disable "Xposed Installer and Framework" = Xposed removed, iSU installed
=> Reboot your device ...
=> Run iSU and give authorisations ..
=> In control : Deactive SU , Set SELinux to Enforcing (check Enforcing is realy wrote)
DO NOT USE WITH LINK2SD linked apps : it will break links
=> In CHECKS : use Safety Net test , it will pass ...
=> Now install Snapchat and log-in ..
You can reverse to Xposed version with Aroma ....
Original iSU thread :
https://xdaforums.com/android/apps-games/isu-simple-app-to-deactivate-activate-t3478348
Change Screen size and DPI :
- Can be usefull to see some apps in Playstore (exemple : amazon is availlable for xhdpi but not for xxhdpi)
- Can be usefull to keep more battery when screen is on
- Use Root browser, go to system/SetScreenSize/
- Tape the Screen you want to use and Execute it
- Device will do a fast reboot to change "res/values" for apps
- The change is done on "data" not on "system"
also,my SIM card slot one was disabled after flash into this ROM,and slot two only support 2G network.:crying: does anyone have the same problem?
I don't use cast, so can't help i There.. but in Xposed addition app u enable miscellaneous and then it will recognize smart key
Buttons - external devices - miscellaneous.
Add button - click smart key 1 time and close the little window.
Create conditions and what it should do
Do like told earlier, but this time you press the button and go back, then there should be a red cross, if you press next to the red cross you should get the configure button pop up?Hi, i'm trying to use the smart key but it doesn't get recognized, i installed xposed framework, xbridge and xposed additions, when i try to add a new key it recognizes all other keys (in the little window it says what i pressed) but not the smart key. Should i install/configure something else?
Thanks.
Does anybody have terrible battery life?
My phone lately cannot survive even 20 minutes without charger. I think that problem is not in old battery (phone is 11 months old), but (probably) software.
Today it was turned off, on charger probably for 2-3 hour and battery was slowly charged to about 95%. After disconnecting charger and using phone for about 10 minutes battery was still at 91%, but phone just turned off.
I can turn it on, battery will show about 85+%, but it will shut off almost immediately. Similar behavior was observed for the past 3-4 weeks (but with other battery percent, but all were over 50%).
I did not try stock ROM in the past 6 or so months, but I remember that I was able to have normal (well, more than 1-2 hour) battery life on alternate ROMs.
There was battery patch on page 4 but it's deleted. Is there something similar what I can try to give my phone more than 10 minutes of life without charger?
Thanks
Unfortunately, sound is not working for me throught the speaker and headphones :/ Also camera is not working - error CSF.REAR
I was reinstalling ROM 3 times and still nothing. :crying: Does anyone else have the same problem?
Hi, I think it's because you're on stock b390, if twrp311 works fine, it will flash the ROM without problems, I recommended the other one coz it's better to clean dalvik and cache.@Speedo.thc I am trying to install this rom, but an issue immediately turned up. My Honor 7 (Plk-L01, B390) doesn't accept the TWRP version you linked in the thread . It simply boots into stock recovery. Instead, I tried to use TWRP 311 and it correctly works. Can I install this ROM with my version of TWRP or I will break something?
Thanks in advance
Use my Lineage OS 13 from sources or Lineage OS 13 reloaded by Speedo, it should work there.I recently installed this version of Lineage on my Honor 7 but after i tried to setup the fingerprint unlock method i always get the error: Enrolement was not complete Fingerprint enrolment didn`t work. Try again or use a different finger. But im not even able to use one of my fingers because this error keeps popingup. Anyone experincing the same bug and has some solutions or workarounds?
* Your warranty is now void.
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications,
* and if you point the finger at us for messing up your device, we will laugh at you.
* Please DO A BACKUP of your System and datas , then COPY it on your computer
Yesss , and alway to see a better battery life.
Hi my friend , the OS 13 seems to be good now , bugs are :@Speedo.thc Do you plan on working on porting lineage OS 14 from p8 ? Or fixing Lineage OS 13 bugs is your priority now?
Sent from my HUAWEI GRA-L09 using Tapatalk