LineageOS 14.1 | 27.11.2019 | Shield blobs EOL

Search This thread

Artemka2008

Senior Member
Feb 3, 2016
201
612
Moscow
LineageOS 14.1

FOR ROMS RELEASED BEFORE NOVEMBER 2018
Requirements:
1) active system1
2) merged system partition

Instruction
1) flash BootBlobs-SHIELD-mocha.zip
2) reboot to recovery
3) install this recovery
4) reboot to recovery
5) install the ROM


FOR ROMS RELEASED AFTER NOVEMBER 2018
Requirements:
1) active system1
2) merged system partition
3) BRAIN, READING SKILL and presence of basic knowledge about firmware (in the absence need learn to independently)

Instruction
1) download TosForPSCI-0.1.zip
2) unzip TosForPSCI-0.1.zip
3) download recovery-03.11.2018
4) go to fastboot mode
5) execute command: fastboot flash tos your path to tos.img
6) execute command: fastboot flash recovery your path to recovery-03.11.2018.img
7) reboot to new recovery(u can execute fastboot reboot holding vol+ button)
8) if you are on previous LineageOS 14.1 build then you may install the ROM without wipes. If you're not, make full wipes then
9) install current LineageOS 14.1 build
10) reboot to the system

Sources
Device
Kernel
Vendor

Changelogs

27.11.2019

system:
- the latest security patch by LineageOS team
- OMS support(Substratum)
- added color engine(Settings -> Display -> Themes)
- add/remove quick settings tiles with one touch
- optimized scroll gesture
- fixed bug in a gesture of calling the quick settings on the desktop
- open all apps gesture works across the entire desktop area

kernel:
- reconfigured Quick Charge mode(9V 2A)


28.10.2019

system:
- the latest security patch by LineageOS team
- Trebuchet replaced by Launcher3

kernel:
- all changes since release in December 2018

28.12.2018

system:
- the latest security patch

kernel:
- a little bit updated sdcardfs
- fixes of defects after switching to the new Synaptics touchscreen driver


03.11.2018

system:
- the latest security patch
- added tile for activatingdeactivating battery charging

kernel:
- new Synaptics touchscreen driver(possibly less lags)
- a little bit updated sdcardfs
- fixed a couple of security issues when using root
- PSCI downgraded to version 0.1


28.09.2018
system:
- the latest security patch

kernel:
- reworked binder driver(the system should be more stable)


19.08.2017
system:
- the latest security patch

kernel:
- dvfs driver was heavily updated(better power consumption)
- binder was updated
- therm_est thermal sensor was fixed


24.07.2018
system:
- source code was updated
- changes for devices with 3Gb RAM

kernel:
- added new driver(written by me) for reducing cpu power consumption in suspend mode.
- panel driver was changed for reducing power consumption in suspend mode
- palmas gpio driver was changed for reducing power consumption in suspend mode


18.06.2018

system:
- source code was updated

kernel:
- spectre patch by nvidia
- other small changes


21.05.2018
system:
- source code was updated
- usb internet sharing was fixed
- other small changes

kernel:
- sdcardfs was updated to the 3.18 kernel level.
- ability to change display colors was added


14.04.2018
system:
- sdfat was added(instead of vfat and exfat)
- audio HAL was updated(like in 15.1)
- 64-bit binder was returned

kernel:
Los14.1 and Los15.1 use an unified kernel for now. All updates from 15.1 are inside.


16.03.2018

kernel:
- usb otg for flash drives was fixed
- problems with battery percentages was fixed


09.03.2018
kernel:
- based on official rel-24-uda-r1 branch
- updated binder

system:
- we are using 64-bit binder for now
- updated sources



Broken:
- Cameras

Download:
Touchscreen hotfix for ROM released at 29.12.2018
ROM folder
Last build

XDA:DevDB Information
LineageOS 14.1, ROM for the Xiaomi Mi Pad

Contributors
Artemka2008
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x

Version Information
Status: Stable

Created 2018-10-05
Last Updated 2020-03-09
 
Last edited:

Artemka2008

Senior Member
Feb 3, 2016
201
612
Moscow
27.11.2019

system:
- the latest security patch by LineageOS team
- OMS support(Substratum)
- added color engine(Settings -> Display -> Themes)
- add/remove quick settings tiles with one touch
- optimized scroll gesture
- fixed bug in a gesture of calling the quick settings on the desktop
- open all apps gesture works across the entire desktop area

kernel:
- reconfigured Quick Charge mode(9V 2A)

What is "tile for activating\deactivating battery charging"?
- this is system icon(like performance profiles) which permits\prohibits the supply of current to the battery at the time when the charger is connected.

Why do we need that tile?
- if you play, watch a movie or perform another costly action, then activating this mode will save the battery from unnecessary wear because energy will go directly from the charger. But you need a fairly powerful charger, if the power of the charger is not enough, then partially the consumption will be compensated by the battery.

What happens if you do not install TosForPSCI-0.1?
- at best, only one CPU core will be active. At worst, the recovery will not be started (if it has not been updated too) and the system too.

How to roll back on the firmware version, which came out before November?
- download TosForPSCI-0.2 and recovery. You'll be able to flash older ROMs after installing them

Why do I need to lower the PSCI version from 0.2 to 0.1?
- Using version 0.1 fixes a problem with shutting down a device.
 
Last edited:

filandry

Senior Member
Mar 3, 2016
124
34
Xiaomi Mi 5
finally on xda thread!!big thanks to this rom contributor.
Best Rom for mi pad 1,dirty flash from previous build,works like a charm
 

Tautologica

Senior Member
Jul 29, 2012
265
66
Samsung Galaxy S20 FE
Spassiba!
Absolutely great to see you back in XDA.
I've been following your progress thru 4pda.ru but sometimes google translate just doesn't do justice.

I would like to ask ppl who have used this ROM that how is the deep sleep power consumption?
There was few interesting changes in the 24.7 and 19.8 versions that could make the stand-by drainage less severe.
 

filandry

Senior Member
Mar 3, 2016
124
34
Xiaomi Mi 5
Spassiba!
Absolutely great to see you back in XDA.
I've been following your progress thru 4pda.ru but sometimes google translate just doesn't do justice.

I would like to ask ppl who have used this ROM that how is the deep sleep power consumption?
There was few interesting changes in the 24.7 and 19.8 versions that could make the stand-by drainage less severe.
i lost 4-5% around 9 hours deep sleep mode with wifi turned off + greenify
thats pretty good i guess :)
 

pussel

Member
Sep 22, 2018
6
1
Hell o , im using last build
My battery indicator percentage stuck and after continously use , then the tablet suddenly got shutdown.?
what should i do? help this noob .:):D
 

G.S.T

Senior Member
May 13, 2017
167
119
Xiaomi Poco F3
Hell o , im using last build
My battery indicator percentage stuck and after continously use , then the tablet suddenly got shutdown.?
what should i do? help this noob .:):D
Your battery is not calibrated.use any app or fully discharge and charge to 100% 2 or 3 times and this will be fixed.issue and remedy common with new rom flash
 

Jenovs

New member
Jul 2, 2018
3
0
I've been on update 8 (2018/06/18) for months and Mipad finally stuck at LOS logo. Please tell me why.
Clean install (update 11) done, the issue's still there after a couple of days. Actually, I only need to do factory reset to fix this.
 
Last edited:

luckywang95

Member
Jul 12, 2014
31
4
stupid me who doesnt read helps you guys to test what will happen if dont install the TOS patch...
it will install and boot without any issue... BUT if it is not connected to charger and once you off the screen, it turns off.
I tot my battery is dead but then I go back and read the whole thread again then realize there is a new instruction for installing new ROM... so guys... please read the whole thread next time... haha...
different device might have different results but this is what happen to mine...

---------- Post added at 01:17 PM ---------- Previous post was at 01:00 PM ----------

I found the on-screen navigation toggle (under button right?) is missing. Is it being removed in the latest version or i mess something up again? FYI, i did a clean install.
 
Jun 12, 2011
16
0
Venice
Hi, I installed last rom 03.11.2018, it is very smooth. I try to record audio by microphone, but don't work... instead google assistant understand my voice.
Thanks
 

Schrauff

Senior Member
Mar 17, 2012
139
23
I would like to try this ROM, does it have gapps and root already integrated?
Let me answer my question: no, gapps and root need to be installed separately.
This ROM is wicked fast and smooth!
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 40
    LineageOS 14.1

    FOR ROMS RELEASED BEFORE NOVEMBER 2018
    Requirements:
    1) active system1
    2) merged system partition

    Instruction
    1) flash BootBlobs-SHIELD-mocha.zip
    2) reboot to recovery
    3) install this recovery
    4) reboot to recovery
    5) install the ROM


    FOR ROMS RELEASED AFTER NOVEMBER 2018
    Requirements:
    1) active system1
    2) merged system partition
    3) BRAIN, READING SKILL and presence of basic knowledge about firmware (in the absence need learn to independently)

    Instruction
    1) download TosForPSCI-0.1.zip
    2) unzip TosForPSCI-0.1.zip
    3) download recovery-03.11.2018
    4) go to fastboot mode
    5) execute command: fastboot flash tos your path to tos.img
    6) execute command: fastboot flash recovery your path to recovery-03.11.2018.img
    7) reboot to new recovery(u can execute fastboot reboot holding vol+ button)
    8) if you are on previous LineageOS 14.1 build then you may install the ROM without wipes. If you're not, make full wipes then
    9) install current LineageOS 14.1 build
    10) reboot to the system

    Sources
    Device
    Kernel
    Vendor

    Changelogs

    27.11.2019

    system:
    - the latest security patch by LineageOS team
    - OMS support(Substratum)
    - added color engine(Settings -> Display -> Themes)
    - add/remove quick settings tiles with one touch
    - optimized scroll gesture
    - fixed bug in a gesture of calling the quick settings on the desktop
    - open all apps gesture works across the entire desktop area

    kernel:
    - reconfigured Quick Charge mode(9V 2A)


    28.10.2019

    system:
    - the latest security patch by LineageOS team
    - Trebuchet replaced by Launcher3

    kernel:
    - all changes since release in December 2018

    28.12.2018

    system:
    - the latest security patch

    kernel:
    - a little bit updated sdcardfs
    - fixes of defects after switching to the new Synaptics touchscreen driver


    03.11.2018

    system:
    - the latest security patch
    - added tile for activatingdeactivating battery charging

    kernel:
    - new Synaptics touchscreen driver(possibly less lags)
    - a little bit updated sdcardfs
    - fixed a couple of security issues when using root
    - PSCI downgraded to version 0.1


    28.09.2018
    system:
    - the latest security patch

    kernel:
    - reworked binder driver(the system should be more stable)


    19.08.2017
    system:
    - the latest security patch

    kernel:
    - dvfs driver was heavily updated(better power consumption)
    - binder was updated
    - therm_est thermal sensor was fixed


    24.07.2018
    system:
    - source code was updated
    - changes for devices with 3Gb RAM

    kernel:
    - added new driver(written by me) for reducing cpu power consumption in suspend mode.
    - panel driver was changed for reducing power consumption in suspend mode
    - palmas gpio driver was changed for reducing power consumption in suspend mode


    18.06.2018

    system:
    - source code was updated

    kernel:
    - spectre patch by nvidia
    - other small changes


    21.05.2018
    system:
    - source code was updated
    - usb internet sharing was fixed
    - other small changes

    kernel:
    - sdcardfs was updated to the 3.18 kernel level.
    - ability to change display colors was added


    14.04.2018
    system:
    - sdfat was added(instead of vfat and exfat)
    - audio HAL was updated(like in 15.1)
    - 64-bit binder was returned

    kernel:
    Los14.1 and Los15.1 use an unified kernel for now. All updates from 15.1 are inside.


    16.03.2018

    kernel:
    - usb otg for flash drives was fixed
    - problems with battery percentages was fixed


    09.03.2018
    kernel:
    - based on official rel-24-uda-r1 branch
    - updated binder

    system:
    - we are using 64-bit binder for now
    - updated sources



    Broken:
    - Cameras

    Download:
    Touchscreen hotfix for ROM released at 29.12.2018
    ROM folder
    Last build

    XDA:DevDB Information
    LineageOS 14.1, ROM for the Xiaomi Mi Pad

    Contributors
    Artemka2008
    ROM OS Version: 7.x Nougat
    ROM Kernel: Linux 3.10.x

    Version Information
    Status: Stable

    Created 2018-10-05
    Last Updated 2020-03-09
    16
    27.11.2019

    system:
    - the latest security patch by LineageOS team
    - OMS support(Substratum)
    - added color engine(Settings -> Display -> Themes)
    - add/remove quick settings tiles with one touch
    - optimized scroll gesture
    - fixed bug in a gesture of calling the quick settings on the desktop
    - open all apps gesture works across the entire desktop area

    kernel:
    - reconfigured Quick Charge mode(9V 2A)

    What is "tile for activating\deactivating battery charging"?
    - this is system icon(like performance profiles) which permits\prohibits the supply of current to the battery at the time when the charger is connected.

    Why do we need that tile?
    - if you play, watch a movie or perform another costly action, then activating this mode will save the battery from unnecessary wear because energy will go directly from the charger. But you need a fairly powerful charger, if the power of the charger is not enough, then partially the consumption will be compensated by the battery.

    What happens if you do not install TosForPSCI-0.1?
    - at best, only one CPU core will be active. At worst, the recovery will not be started (if it has not been updated too) and the system too.

    How to roll back on the firmware version, which came out before November?
    - download TosForPSCI-0.2 and recovery. You'll be able to flash older ROMs after installing them

    Why do I need to lower the PSCI version from 0.2 to 0.1?
    - Using version 0.1 fixes a problem with shutting down a device.
    11
    the ROM was updated
    7
    the ROM was updated
    5
    Added touchscreen hotfix for the latest ROM