LineageOS 16.0 Android 9 for GT-N8000 GT-N8010 GT-N8013 GT-N8020 FINAL VERSION EOL

Search This thread
By:
Advanced…
S

stefano.sb

Member
Sep 9, 2019
20
3
Hi, I have a problem with my NT-8000 where I have installed TWRP 3.5.2 and last version of Lineage 16. Until a few days ago all was ok but now:

  1. During normal boot the device remains stucked on animated Lineage logo
  2. If I try to enter in TWRP I see only initial screen and the device enter directly in normal boot (see previous point...)
I can enter in downloading mode ("odin mode") so I tried to use Odin to re-flash TWRP but Odin returns the error reported below. I tried also to re-flash the Samsung original firmware but Odin returns always the same write error :-( What can I do?

Thanks

Stefano

Capture.JPG
 
H

html6405

Recognized Developer
Jan 15, 2016
3,062
3,339
Samsung Galaxy S III I9300
Samsung Galaxy Note 10.1
stefano.sb said:
Hi, I have a problem with my NT-8000 where I have installed TWRP 3.5.2 and last version of Lineage 16. Until a few days ago all was ok but now:

  1. During normal boot the device remains stucked on animated Lineage logo
  2. If I try to enter in TWRP I see only initial screen and the device enter directly in normal boot (see previous point...)
I can enter in downloading mode ("odin mode") so I tried to use Odin to re-flash TWRP but Odin returns the error reported below. I tried also to re-flash the Samsung original firmware but Odin returns always the same write error :-( What can I do?

Thanks

Stefano

View attachment 5399313
Click to expand...
Click to collapse
This could be because of a defective eMMC, I would try to download a 4 part firmware (with frija) and try to flash.
If the repartitioning process is also not possible, it's the eMMC.
 
S

stefano.sb

Member
Sep 9, 2019
20
3
html6405 said:
This could be because of a defective eMMC, I would try to download a 4 part firmware (with frija) and try to flash.
If the repartitioning process is also not possible, it's the eMMC.
Click to expand...
Click to collapse
Thanks @html6405 for the clear answer :) I used Frija (fantastic tool) to download the firmware but it's only one file. How can I download it in 4 separate files

Thanks!

Stefano
 
S

stefano.sb

Member
Sep 9, 2019
20
3
html6405 said:
I'm sorry, but I forgot to mention that you have to enable the binary nature option in the settings.
Click to expand...
Click to collapse
Thanks for the support! Now I have downloaded the four files firmware and I tried to flash using Odin3 3.14 but.... see below

So...
  1. Can I try something else?
  2. Kies?
  3. Can I try other firmware? or....have to throw out my device :-(

Capture.JPG
 
N

NikoNik7

Senior Member
Sep 22, 2018
52
1
Dear html6405,
Can we hope for more energy efficiency? The battery is draining very quickly. Even though the battery is new. It was better on the Android 8 build. N8000.
 
L

LR7875

Senior Member
Jun 25, 2021
1,200
467
Samsung Galaxy Tab 2
Xiaomi Mi Pad
NikoNik7 said:
Dear html6405,
Can we hope for more energy efficiency? The battery is draining very quickly. Even though the battery is new. It was better on the Android 8 build. N8000.
Click to expand...
Click to collapse
Well there are no android 8 build ever released to the public. Only android 7 build or android 9 (or 11).
Is your battery worn out? This is hard to tell but maybe others have no battery issue, etc.
Send out a logcat (command 'adb logcat') will help @html6405 diagnose the problem.
 
  • Like
Reactions: html6405
N

NikoNik7

Senior Member
Sep 22, 2018
52
1
LR7875 said:
Well there are no android 8 build ever released to the public. Only android 7 build or android 9 (or 11).
Is your battery worn out? This is hard to tell but maybe others have no battery issue, etc.
Send out a logcat (command 'adb logcat') will help @html6405 diagnose the problem.
Click to expand...
Click to collapse
Android 7, yes, sorry.
Do I need root access to logcat?
 
H

html6405

Recognized Developer
Jan 15, 2016
3,062
3,339
Samsung Galaxy S III I9300
Samsung Galaxy Note 10.1
C

Charly_Maths

Senior Member
Jan 22, 2017
56
13
Rosario
Hello.
I'm having an issue.
I think it's the same issue that some of us have earlier.
When I'm playing HBO Max some colours are seeing strange. Like 3d whiteout the glasses.
It's something about the codecs, right?

Pd: englis it's not my native language... So...
 
You must log in or register to reply here.

Similar threads

Mikyno
[ROM][N8000][N8013][N8010][4.4.2] Gnabo Rom V8 [AIR COMMAND - NOTE 2014 APPS ]
Replies
5K
Views
1M
J
jhunkab
zedomax
How to ROOT Galaxy Note 10.1 3G/Wifi! [N8000/N8013/N8010]
Replies
670
Views
632K
S
ST Dog
L
[ROM][LineageOS][N801x/N8000][ALPHA][10/08/2017]Nougat
Replies
1K
Views
642K
R
RobCampbell
H
LineageOS 18.1 Android 11 for GT-N8000 GT-N8005 GT-N8010 GT-N8013 GT-N8020 Beta EOL
Replies
773
Views
190K
A
Alexfs
L
[ROM][CM13.0][N801x/N8000][BETA][01/09/2016]Marshmallow
Replies
1K
Views
664K
w_tapper
w_tapper

Top Liked Posts

24 Hours 30 Days All time
  • There are no posts matching your filters.
  • 1
    M
    MarkieVulper
    @html6405 Thank you for excellent job! Lineage 16.0 works fantastic on my N8010! I flashed it myself for the first time and everything works better then expected, stable and fluid.
    Just wanted to tell the others who are interested that the device is fast with (original) battery lasting for hours of video. The device shows that it is certified. YouTube works, Netflix and HBO MAX also. I have downloaded Sketchbook and FlipaClip to try S-pen and it works without problem. Regarding stream TV video apps I have noticed that some channels have broken picture if the battery is on the power saving mode.
    The only problem I have encountered so far is that some channels at our local TV streaming app MAXTV2GO (developed by T-com) have broken picture, like the tiles with horizontal lines (probably some codec issues?). Other channles on the same app work fine, and the third work good if the battery saving mode is turned off...
    View
    1
    w_tapper
    w_tapper
    jrotaetxe said:
    Hi all
    Having problems trying to flash Magisk 26.1. No matter if I flash from TWRP or if I patch the boot.img, and then flash boot.img, no success.
    Is there any problem with Magisk and this ROM?
    Thank you
    Click to expand...
    Click to collapse
    yeah u gotta install this kernel that @html6405 made

    LineageOS 20.0 (Android 13) for GT-N8000 GT-N8005 GT-N8010 GT-N8013 GT-N8020 ALPHA

    /* * Your warranty is now void. * * I am not...
    forum.xda-developers.com forum.xda-developers.com

    just flash in twrp
    View
    1
    w_tapper
    w_tapper
    jrotaetxe said:
    The kernel suggested seems not compatible with my device (GT.N8020)
    Any suggestion?
    Thanks!
    Click to expand...
    Click to collapse
    oh, i think there was an older version in the thread for gt-n8020 but the headphone jack wasnt working


    if you dont want a new kernel you could install magisk 24.1
    View
    1
    J
    jrotaetxe
    w_tapper said:
    oh, i think there was an older version in the thread for gt-n8020 but the headphone jack wasnt working


    if you dont want a new kernel you could install magisk 24.1
    Click to expand...
    Click to collapse

    Do not waste time with this, but if you manage to remember which was the thread, I will be grateful. Meanwhile, I think I will be able to manage using 24.1
    Regards
    View
    1
    A
    anjarys
    c-ale said:
    Hello, I have the same problem, I have loaded the modem.tar without being able to solve it, I tried going back to the version of the original operating system of the tablet and the card works fine and reads the imei of the tablet without problem,
    I also tried to install the different versions of lineage os that there are for the N8000 and the same thing happens with all of them, so I stopped trying and only use it connected to Wi-Fi.
    Click to expand...
    Click to collapse
    Once i flashed N8000 rom to my N8000 tablet. Never tried the sim card because 3G network was terminated by govt.

    But then my device gets very hot on standard usage. Log shows that the sim slot is continously searching for signal even the sim card is not loaded.

    OP then suggests me to flash N8010 TWRP and then flash N8010 rom to my N8000. All went good.
    View
  • 65
    H
    html6405
    Code: 
    /*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/


    Hi,

    here you can find my LineageOS 16.0 for the Samsung Galaxy Note 10.1.
    At first I want to thank @forkbomb444, @rINanDO, @ChronoMonochrome and all the others who are working on the exynos 4 devices, you deserve it.

    I'm working nearly every day to improve our N80xx devices and here you get a already stable version.

    Here you can see what's working / not working:

    N8000, N8010, N8013, N8020:
    Boot
    Audio
    Bluetooth
    Graphics
    Cameras
    Sensors
    Wifi
    USB
    Video playback (HW/SW)
    OTA Updates
    RIL N8000, N8020
    GPS, not sure if completely
    Tethering via USB, WIFI and Bluetooth
    consumerir transmitter
    • Main camera sometimes can't take a picture in full resolution, you could simply reopen the app and retry, or you lower the resolution.
    TWRP

    N8000 Rom
    N8010 / N8013 Rom
    N8020 Rom

    If you're having problems with decoding some videos (blurried),
    this is mostly because the avc hardware decoder gets configured wrongly.

    You can disable it with my magisk module:
    avc_decoder_disabler.zip



    If you are going to use Gapps,
    I recommend to use the pico package!
    https://opengapps.org/
    For the others, you can use microG if you want, I've enabled signature spoofing.


    Do you like my work?
    Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
    I'm doing this in my free time and it also costs a lot of money to buy hardware.
    donate

    If you don't like it, reboot into recovery and type the following command:
    You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /system/etc/gps.conf.
    Or you try GPS Server Optimizer app for a faster 3D fix.
    For both methods you need root rights.
    Instructions

    Wanna improve your sound configs?
    Now you can use my app to access all boeffla sound configurations.

    Exynos4 Kernel Manager - Apps on Google Play

    This app provides Boeffla sound control and...
    play.google.com play.google.com

    XDA:DevDB Information
    [ROM][9.x][N8000/N801x/N8020][STABLE] LineageOS 16.0, ROM for the Samsung Galaxy Note 10.1

    Contributors
    html6405
    Source Code: https://github.com/html6405

    ROM OS Version: 9.x Pie
    ROM Kernel: Linux 3.x
    ROM Firmware Required: TWRP 3.3.0
    Based On: LineageOS

    Version Information
    Status:     Stable
    Release Date: 2020-12-15

    Created 2020-10-26
    Last Updated 2022-04-20
    View
    11
    H
    html6405
    Update 15.12.2020:
    • programmed button in language and input settings to enable / disable pointer icon.
      (like we had it in previous lineage versions)
    • replaced icon with original smaller one from stock rom
    Only via OTA.
    View
    10
    H
    html6405
    Update 07.12.2020:
    • included 60Hz camera parameter
    • fixed screen cast
    • partly reverted Nov. 24th update, hope that the charging bug is gone now
    • improved auto brightness
    • included GPS fix improvement suggestion in initial post
    View
    7
    A
    acxewd
    Hey, I just installed this to n8005 and you saved me from buying a new tablet. It works beyond my expectations. This is 8+ years old device after all. You are also helping environment too. Companies should do what you are doing instead of removing chargers to protect the environment. You seriously deserve donation. Have a nice day
    View
    6
    H
    html6405
    I'm sorry people,
    because I've created a new domain wifi related,
    it made some existing rules uneffective.

    I'm working hard to run selinux without any neverallow rules (I'm nearly there) to provide the best security.

    To get wifi working again, type with your PC or terminal emulator:

    adb shell (only with PC)
    su
    setenforce 0

    and wifi will work again, there will be another update today with the new fixes.
    View

New posts