LineageOS 16.0 Android 9 for GT-N8000 GT-N8010 GT-N8013 GT-N8020 FINAL VERSION EOL

Search This thread

showkeys

Member
Feb 18, 2010
18
1
Great work, gives our tabs a new life indeed.
However, zoom application not works properly as screen sharing is not worked at all, any advise?
 

html6405

Recognized Developer
Great work, gives our tabs a new life indeed.
However, zoom application not works properly as screen sharing is not worked at all, any advise?

This is because of the used pixel format of the rom, I'm not sure yet if we can change this,
but I will work on it.
The easiest way would be if zoom just would include a little fallback function.
 

rexmako

Senior Member
Feb 7, 2017
117
5
Just wanted to confirm the rom is working fine on my n8000 (2012 model) with arm-9-pico gapps. Thanks from the bottom of the heart.
audio is on slightly lower side.

I want to say a very big thank you to the developer for making out time to make us happy again by bringing back to life our aging devices. Sincerely, you're highly appreciated. I'm however having a slight hitch installing the arm-9-pico gapps on my N8000. After flashing, it gets stuck in the boot animation and returns to recovery. I'll appreciate your assistance in this regard. Thanks.
 

metermen

Member
Oct 12, 2010
14
2
İZMİR
merhaba ismim onur google play srore çalışmıyor yüklenen apk ler çalışmıyor hiçbir yapılan işlemem izin verilmiyor.
 

html6405

Recognized Developer
I want to say a very big thank you to the developer for making out time to make us happy again by bringing back to life our aging devices. Sincerely, you're highly appreciated. I'm however having a slight hitch installing the arm-9-pico gapps on my N8000. After flashing, it gets stuck in the boot animation and returns to recovery. I'll appreciate your assistance in this regard. Thanks.
Hmm ok, have you checked the md5 sum of the downloaded gapps?
If not, do it and if it's faulty, just redownload them and give it a retry.
 

rexmako

Senior Member
Feb 7, 2017
117
5
This happened to me when I booted the rom before flashing gapps. I had to flash both rom and gapps in one step for it to work


Works perfectly. I flashed both one after the other before rebooting, and now I'm enjoying my device again. Thanks.

---------- Post added at 02:08 PM ---------- Previous post was at 02:01 PM ----------

Hmm ok, have you checked the md5 sum of the downloaded gapps?
If not, do it and if it's faulty, just redownload them and give it a retry.

It's working now. I flashed ROM and gapps before rebooting to system. Only the google play store is not certified. That, for now, is not much of problem as I've also installed the uptodown app store where I could install Netflix and some other apps. Thanks once again for the good job @ Html6405
 

html6405

Recognized Developer
Works perfectly. I flashed both one after the other before rebooting, and now I'm enjoying my device again. Thanks.

---------- Post added at 02:08 PM ---------- Previous post was at 02:01 PM ----------



It's working now. I flashed ROM and gapps before rebooting to system. Only the google play store is not certified. That, for now, is not much of problem as I've also installed the uptodown app store where I could install Netflix and some other apps. Thanks once again for the good job @ Html6405

It's easy to optain the playstore certificate, just enable Magisk hide (must be rooted), do a safety net check,
delete all the playstore data and reopen it, voilà.

But Magisk hide stops working sometimes... Anyway I'm able to download Netflix etc from the Playstore :p.
But I want to reach the certification level in future.
 

html6405

Recognized Developer
Wow! Works like magic. You're indeed a genius. My playstore is now certified. One more thing...I notice the battery indicator does not appear when charging while power is off. Though, the device is charging, as it achieves optimal charging capacity. Thanks again for the good work. Can't wait for further updates or an upgrade to the android 10 or 11 OS...

This function is not implemented, but it's charging 100% controlled through the kernel,
if you want to see more, you have to boot the device :D.
 

geominas

Member
Aug 17, 2010
17
0
Cannot install rom

I downloaded rom from first page , upgraded twrp and try to flash. Then I get this error message. What's wrong? (Tried with RR, same result. I can only install Slim)
https://ibb.co/JnRcKs5
 
Last edited:

user602

Senior Member
May 8, 2007
663
449
Samsung Galaxy Note 10.1
Nexus 7
Netflix and Hulu

It's easy to optain the playstore certificate, just enable Magisk hide (must be rooted), do a safety net check,
delete all the playstore data and reopen it, voilà.

But Magisk hide stops working sometimes... Anyway I'm able to download Netflix etc from the Playstore :p.
But I want to reach the certification level in future.

Edit: I was able to find the apps after searching again the next morning, so OP's instructions worked.

Original post:

I followed the steps in the above quote and successfully obtained Play store certification, but Netflix and Hulu are still not visible for download. Should anyone else encounter this problem, I can confirm that the latest versions of these apps both function properly when installed from elsewhere (I downloaded them from APK Mirror).

I don't know what information the Play store collects to determine what apps should be available to a particular device, but case it is relevant to the issue, I'll note that I am located in the US, and have the N8013 version of this tablet, which is now listed as N8010 under "model & hardware" in the ROM settings.


Thank you for your work on this. I decided to browse this device forum for the first time in months because I was bored, but never expected to find development newer than LOS14.1. This is an impressive "alpha" build and I'll be following your progress. :good:
 
Last edited:
Jun 28, 2014
37
3
Hi,

I've installed it on my n8010 (nov 11 build)

So far I've run into following problems:

1) Opening firefox browser causes my tablet to reboot
2) This I'm not 100% sure about, but I've felt as if the sound was louder even at a lower volume level and harsher than it was on slimroms 7.1.2
3) Was not able to install viper4android driver. SE linux is set to permissive. Viper working fine on slimroms 7.1.2
4) Some animations were a little laggy. And whenever i would open some(any?) apps for a split second it would show what looked like a blurry screenshot of an app and then it would snap back to normal and I could interact with an opened app

Edit: also auto-brightness is a little off
 
Last edited:

html6405

Recognized Developer
I followed the steps in the above quote and successfully obtained Play store certification, but Netflix and Hulu are still not visible for download. Should anyone else encounter this problem, I can confirm that the latest versions of these apps both function properly when installed from elsewhere (I downloaded them from APK Mirror).

I don't know what information the Play store collects to determine what apps should be available to a particular device, but case it is relevant to the issue, I'll note that I am located in the US, and have the N8013 version of this tablet, which is now listed as N8010 under "model & hardware" in the ROM settings.

Thank you for your work on this. I decided to browse this device forum for the first time in months because I was bored, but never expected to find development newer than LOS14.1. This is an impressive "alpha" build and I'll be following your progress. :good:

 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    @html6405 Thank you for excellent job! Lineage 16.0 works fantastic on my N8010! I flashed it myself for the first time and everything works better then expected, stable and fluid.
    Just wanted to tell the others who are interested that the device is fast with (original) battery lasting for hours of video. The device shows that it is certified. YouTube works, Netflix and HBO MAX also. I have downloaded Sketchbook and FlipaClip to try S-pen and it works without problem. Regarding stream TV video apps I have noticed that some channels have broken picture if the battery is on the power saving mode.
    The only problem I have encountered so far is that some channels at our local TV streaming app MAXTV2GO (developed by T-com) have broken picture, like the tiles with horizontal lines (probably some codec issues?). Other channles on the same app work fine, and the third work good if the battery saving mode is turned off...
    1
    Hi all
    Having problems trying to flash Magisk 26.1. No matter if I flash from TWRP or if I patch the boot.img, and then flash boot.img, no success.
    Is there any problem with Magisk and this ROM?
    Thank you
    yeah u gotta install this kernel that @html6405 made


    just flash in twrp
    1
    The kernel suggested seems not compatible with my device (GT.N8020)
    Any suggestion?
    Thanks!
    oh, i think there was an older version in the thread for gt-n8020 but the headphone jack wasnt working


    if you dont want a new kernel you could install magisk 24.1
    1
    oh, i think there was an older version in the thread for gt-n8020 but the headphone jack wasnt working


    if you dont want a new kernel you could install magisk 24.1

    Do not waste time with this, but if you manage to remember which was the thread, I will be grateful. Meanwhile, I think I will be able to manage using 24.1
    Regards
  • 65
    Code:
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    *
    */


    Hi,

    here you can find my LineageOS 16.0 for the Samsung Galaxy Note 10.1.
    At first I want to thank @forkbomb444, @rINanDO, @ChronoMonochrome and all the others who are working on the exynos 4 devices, you deserve it.

    I'm working nearly every day to improve our N80xx devices and here you get a already stable version.

    Here you can see what's working / not working:

    N8000, N8010, N8013, N8020:
    Boot
    Audio
    Bluetooth
    Graphics
    Cameras
    Sensors
    Wifi
    USB
    Video playback (HW/SW)
    OTA Updates
    RIL N8000, N8020
    GPS, not sure if completely
    Tethering via USB, WIFI and Bluetooth
    consumerir transmitter
    • Main camera sometimes can't take a picture in full resolution, you could simply reopen the app and retry, or you lower the resolution.
    TWRP

    N8000 Rom
    N8010 / N8013 Rom
    N8020 Rom

    If you're having problems with decoding some videos (blurried),
    this is mostly because the avc hardware decoder gets configured wrongly.

    You can disable it with my magisk module:
    avc_decoder_disabler.zip



    If you are going to use Gapps,
    I recommend to use the pico package!
    https://opengapps.org/
    For the others, you can use microG if you want, I've enabled signature spoofing.


    Do you like my work?
    Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
    I'm doing this in my free time and it also costs a lot of money to buy hardware.

    donate

    If you don't like it, reboot into recovery and type the following command:
    You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /system/etc/gps.conf.
    Or you try GPS Server Optimizer app for a faster 3D fix.
    For both methods you need root rights.

    Wanna improve your sound configs?
    Now you can use my app to access all boeffla sound configurations.

    XDA:DevDB Information
    [ROM][9.x][N8000/N801x/N8020][STABLE] LineageOS 16.0, ROM for the Samsung Galaxy Note 10.1

    Contributors
    html6405
    Source Code: https://github.com/html6405

    ROM OS Version: 9.x Pie
    ROM Kernel: Linux 3.x
    ROM Firmware Required: TWRP 3.3.0
    Based On: LineageOS

    Version Information
    Status:
    Stable
    Release Date: 2020-12-15

    Created 2020-10-26
    Last Updated 2022-04-20
    11
    Update 15.12.2020:
    • programmed button in language and input settings to enable / disable pointer icon.
      (like we had it in previous lineage versions)
    • replaced icon with original smaller one from stock rom
    Only via OTA.
    10
    Update 07.12.2020:
    • included 60Hz camera parameter
    • fixed screen cast
    • partly reverted Nov. 24th update, hope that the charging bug is gone now
    • improved auto brightness
    • included GPS fix improvement suggestion in initial post
    7
    Hey, I just installed this to n8005 and you saved me from buying a new tablet. It works beyond my expectations. This is 8+ years old device after all. You are also helping environment too. Companies should do what you are doing instead of removing chargers to protect the environment. You seriously deserve donation. Have a nice day
    6
    I'm sorry people,
    because I've created a new domain wifi related,
    it made some existing rules uneffective.

    I'm working hard to run selinux without any neverallow rules (I'm nearly there) to provide the best security.

    To get wifi working again, type with your PC or terminal emulator:

    adb shell (only with PC)
    su
    setenforce 0

    and wifi will work again, there will be another update today with the new fixes.