LineageOS 16.0 Android 9 for GT-N8000 GT-N8010 GT-N8013 GT-N8020 FINAL VERSION EOL

Search This thread

Tweaker Z

Member
Feb 19, 2018
18
3
Hey guys, html6405-sama 🙌🏾 I'm having connection issues, I flashed the stock ROM with Odin and formated data, everything worked well, then after flashing lineage 16.0 on my gt-n8000 wifi became buggy, and BT doesn't work at all... I have tried previous version of lineage 16 but never encountered this issue, until I installed the latest version... Please help. Thank you.
 

w_tapper

Senior Member
Hey guys, html6405-sama 🙌🏾 I'm having connection issues, I flashed the stock ROM with Odin and formated data, everything worked well, then after flashing lineage 16.0 on my gt-n8000 wifi became buggy, and BT doesn't work at all... I have tried previous version of lineage 16 but never encountered this issue, until I installed the latest version... Please help. Thank you.
maybe flash stock and then reflash 16.0?
 

Garfield62

Member
Aug 16, 2009
25
2
Hello i need help by getting the original bbot screen. I have no idea what is to do
i have adb installed on my pc

C:\WINDOWS\system32>adb devices
List of devices attached
41072bc93922112b device

C:\WINDOWS\system32>adb shell
[email protected]:/ $

127|[email protected]:/ $ bash /data/param_restore.sh
/system/bin/sh: bash: not found
127|[email protected]:/ $

and now here what is the error ?


If you don't like it, reboot into recovery and type the following command:
 
Have this and stripped down to bare minimum. However recently taking ages to charge 24 hours plus. Got new charger but same. Kids use it

What could be causing this as stuck on 83% for ages

On patch level 5th Nov 2015 baseband N80000xxcll1
That's likely your battery dying. If you've never replaced the battery in your Note 10.1, it's over a decade old and even if you've taken perfect care of it, it's well past the end of it's expected life.
 
  • Like
Reactions: w_tapper
Hey guys, html6405-sama 🙌🏾 I'm having connection issues, I flashed the stock ROM with Odin and formated data, everything worked well, then after flashing lineage 16.0 on my gt-n8000 wifi became buggy, and BT doesn't work at all... I have tried previous version of lineage 16 but never encountered this issue, until I installed the latest version... Please help. Thank you.

You could try disabling "Protected Management Frames" in your WiFi Router and see if that helps.
 

anjarys

Senior Member
Feb 3, 2011
291
57
Jakarta
Many users complaining about no wifi on this rom. I might found a workaround.

For those who upgrades from touchwiz based rom, try to flash rom from e/os first. Then flash rom from this thread. Happy wifi.
 

funkyirishman

Senior Member
Jul 22, 2011
646
32
Dublin
Samsung Galaxy Watch 4
That's likely your battery dying. If you've never replaced the battery in your Note 10.1, it's over a decade old and even if you've taken perfect care of it, it's well past the end of it's expected life.

Ok dont want to replace battery as not worth it however would that be the only reason? It takes 3 days + to charge so take it updating it to newer android would not be worth the hassle as more than likely the battery?
 

MarkieVulper

New member
May 11, 2023
1
1
@html6405 Thank you for excellent job! Lineage 16.0 works fantastic on my N8010! I flashed it myself for the first time and everything works better then expected, stable and fluid.
Just wanted to tell the others who are interested that the device is fast with (original) battery lasting for hours of video. The device shows that it is certified. YouTube works, Netflix and HBO MAX also. I have downloaded Sketchbook and FlipaClip to try S-pen and it works without problem. Regarding stream TV video apps I have noticed that some channels have broken picture if the battery is on the power saving mode.
The only problem I have encountered so far is that some channels at our local TV streaming app MAXTV2GO (developed by T-com) have broken picture, like the tiles with horizontal lines (probably some codec issues?). Other channles on the same app work fine, and the third work good if the battery saving mode is turned off...
 
  • Like
Reactions: w_tapper

SteelK

Senior Member
Jan 30, 2015
58
13
26
If someone upgrades Magisk on kernel 3.4 from version 25.2 to 26.1, they will probably have to uninstall the old version first, reboot, and then install the new one.
 

jrotaetxe

Senior Member
Mar 31, 2009
263
86
Hi all
Having problems trying to flash Magisk 26.1. No matter if I flash from TWRP or if I patch the boot.img, and then flash boot.img, no success.
Is there any problem with Magisk and this ROM?
Thank you
 

w_tapper

Senior Member
Hi all
Having problems trying to flash Magisk 26.1. No matter if I flash from TWRP or if I patch the boot.img, and then flash boot.img, no success.
Is there any problem with Magisk and this ROM?
Thank you
yeah u gotta install this kernel that @html6405 made


just flash in twrp
 
  • Like
Reactions: jrotaetxe

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    @html6405 Thank you for excellent job! Lineage 16.0 works fantastic on my N8010! I flashed it myself for the first time and everything works better then expected, stable and fluid.
    Just wanted to tell the others who are interested that the device is fast with (original) battery lasting for hours of video. The device shows that it is certified. YouTube works, Netflix and HBO MAX also. I have downloaded Sketchbook and FlipaClip to try S-pen and it works without problem. Regarding stream TV video apps I have noticed that some channels have broken picture if the battery is on the power saving mode.
    The only problem I have encountered so far is that some channels at our local TV streaming app MAXTV2GO (developed by T-com) have broken picture, like the tiles with horizontal lines (probably some codec issues?). Other channles on the same app work fine, and the third work good if the battery saving mode is turned off...
    1
    Hi all
    Having problems trying to flash Magisk 26.1. No matter if I flash from TWRP or if I patch the boot.img, and then flash boot.img, no success.
    Is there any problem with Magisk and this ROM?
    Thank you
    yeah u gotta install this kernel that @html6405 made


    just flash in twrp
    1
    The kernel suggested seems not compatible with my device (GT.N8020)
    Any suggestion?
    Thanks!
    oh, i think there was an older version in the thread for gt-n8020 but the headphone jack wasnt working


    if you dont want a new kernel you could install magisk 24.1
    1
    oh, i think there was an older version in the thread for gt-n8020 but the headphone jack wasnt working


    if you dont want a new kernel you could install magisk 24.1

    Do not waste time with this, but if you manage to remember which was the thread, I will be grateful. Meanwhile, I think I will be able to manage using 24.1
    Regards
  • 65
    Code:
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    *
    */


    Hi,

    here you can find my LineageOS 16.0 for the Samsung Galaxy Note 10.1.
    At first I want to thank @forkbomb444, @rINanDO, @ChronoMonochrome and all the others who are working on the exynos 4 devices, you deserve it.

    I'm working nearly every day to improve our N80xx devices and here you get a already stable version.

    Here you can see what's working / not working:

    N8000, N8010, N8013, N8020:
    Boot
    Audio
    Bluetooth
    Graphics
    Cameras
    Sensors
    Wifi
    USB
    Video playback (HW/SW)
    OTA Updates
    RIL N8000, N8020
    GPS, not sure if completely
    Tethering via USB, WIFI and Bluetooth
    consumerir transmitter
    • Main camera sometimes can't take a picture in full resolution, you could simply reopen the app and retry, or you lower the resolution.
    TWRP

    N8000 Rom
    N8010 / N8013 Rom
    N8020 Rom

    If you're having problems with decoding some videos (blurried),
    this is mostly because the avc hardware decoder gets configured wrongly.

    You can disable it with my magisk module:
    avc_decoder_disabler.zip



    If you are going to use Gapps,
    I recommend to use the pico package!
    https://opengapps.org/
    For the others, you can use microG if you want, I've enabled signature spoofing.


    Do you like my work?
    Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
    I'm doing this in my free time and it also costs a lot of money to buy hardware.

    donate

    If you don't like it, reboot into recovery and type the following command:
    You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /system/etc/gps.conf.
    Or you try GPS Server Optimizer app for a faster 3D fix.
    For both methods you need root rights.

    Wanna improve your sound configs?
    Now you can use my app to access all boeffla sound configurations.

    XDA:DevDB Information
    [ROM][9.x][N8000/N801x/N8020][STABLE] LineageOS 16.0, ROM for the Samsung Galaxy Note 10.1

    Contributors
    html6405
    Source Code: https://github.com/html6405

    ROM OS Version: 9.x Pie
    ROM Kernel: Linux 3.x
    ROM Firmware Required: TWRP 3.3.0
    Based On: LineageOS

    Version Information
    Status:
    Stable
    Release Date: 2020-12-15

    Created 2020-10-26
    Last Updated 2022-04-20
    11
    Update 15.12.2020:
    • programmed button in language and input settings to enable / disable pointer icon.
      (like we had it in previous lineage versions)
    • replaced icon with original smaller one from stock rom
    Only via OTA.
    10
    Update 07.12.2020:
    • included 60Hz camera parameter
    • fixed screen cast
    • partly reverted Nov. 24th update, hope that the charging bug is gone now
    • improved auto brightness
    • included GPS fix improvement suggestion in initial post
    7
    Hey, I just installed this to n8005 and you saved me from buying a new tablet. It works beyond my expectations. This is 8+ years old device after all. You are also helping environment too. Companies should do what you are doing instead of removing chargers to protect the environment. You seriously deserve donation. Have a nice day
    6
    I'm sorry people,
    because I've created a new domain wifi related,
    it made some existing rules uneffective.

    I'm working hard to run selinux without any neverallow rules (I'm nearly there) to provide the best security.

    To get wifi working again, type with your PC or terminal emulator:

    adb shell (only with PC)
    su
    setenforce 0

    and wifi will work again, there will be another update today with the new fixes.