LineageOS 16.0 Android 9 for GT-N8000 GT-N8010 GT-N8013 GT-N8020 FINAL VERSION EOL

[html6405]

Is there someway to stop the tablet telling me the update is needed when (I believe) it isn't?

If you already installed from the 7. october, just ignore it.

 

[raichea]

If you already installed from the 7. october, just ignore it.

Ok, thanks.

 

[gmaduy]

Thanks for the rom html6405!
Just made an account to let everyone know that there is an issue with the latest gapps version (12 October 2021). It fails on setup with "android setup keeps stopping".
Previous version worked fine (I think I tried like 10 times before downgrading xD)

 

[chotnik]

Thanks for the rom html6405!
Just made an account to let everyone know that there is an issue with the latest gapps version (12 October 2021). It fails on setup with "android setup keeps stopping".
Previous version worked fine (I think I tried like 10 times before downgrading xD)

On the side note, is there any reason to update gapps manually after first install with rom? Aren'y they updated in background automatically like Google Play Store services?

 

[chotnik]

You could try to create a logcat while the system boot's up, maybe I can see something there.

What else you could try is to fix the selinux contexts in TWRP.

Thanks but I already fixed it by "reseting" whole /data by changing it to ext2 and back to ext4 and reformating

 

[html6405]

On the side note, is there any reason to update gapps manually after first install with rom? Aren'y they updated in background automatically like Google Play Store services?

Sure they will be updated, but only on the data partition, so if you do a factory reset,
they still will be the "old" version.

Thanks but I already fixed it by "reseting" whole /data by changing it to ext2 and back to ext4 and reformating

Great!

 

[funkyirishman]

Ok have one of these around and wanted to give to kids just to watch you tube and few apps

So installed TWRP but then forgot to do the below

1. In TWRP, you have to choose Wipe and pull „Swipe to Factory Reset“, afterwards choose again Wipe->Advanced Wipe, choose System and pull „Swipe to Wipe“.

So I installed Rom and then Gapps (ARm64/9.0/Pico)

However I wanted to try to debloat and tried to get into developer mode to remove via adb but could not. Also tried to download app Titanium but all play downloads just stay at pending?

Also the home screen just seems to have a back button and small line see picture below so cannot close all apps

Also on power off no option via twrp to boot to recovery etc

So do I have to go back into recovery via power button and volume and wipe and then install rom and gapps and it may work or any other suggestions?

Thanks

 

[html6405]

ARm64

This device has an arm architecture...

So do I have to go back into recovery via power button and volume and wipe and then install rom and gapps and it may work or any other suggestions?

I don't see the problem, but theoretically a factory reset should be enough if you've installed the correct gapps (and not arm64).

 

[funkyirishman]

This device has an arm architecture...

I don't see the problem, but theoretically a factory reset should be enough if you've installed the correct gapps (and not arm64).

Thanks

Reinstalled and did full wipe and correct Gapps and booted fine.

Trying to install magisk and remove apps via adb now as don't need phone, messaging etc just the bare minimum

 

[FanboyStudios]

It seems that I cannot disable Z-RAM. I would like to be able to disable it. How can I do this?
I tried using Smartpack Kernel Manager, but Z-RAM keeps going back to 400MB when I set it to zero. Z-RAM uses more CPU resources and I'm okay with the "low RAM". Honestly 2GB is not all that low, I've used devices with much lower RAM before, and I still use a device that has 1GB of RAM (Moto E LTE - Surnia).

 

[html6405]

It seems that I cannot disable Z-RAM. I would like to be able to disable it. How can I do this?

For this you will have to modify the ramdisk and delete

swapon_all /fstab.smdk4x12

in the init.target.rc.

Also, you could delete the
/dev/block/zram0

line in the fstab.

 

[woodoste]

Hi, I installed your rom on my GT-N8020. It runs smootly and much better than old Cyagenmod one, but I cannot use the SIM CARD. A message asks me to reboot to activate the mobile data, but it appears at every logon and I cannot surf (no internet connection)... Is there a way to fix? This rom is awesome and I won't back on old Cyagenmod CF.

Cheers

 

[html6405]

Hi, I installed your rom on my GT-N8020. It runs smootly and much better than old Cyagenmod one, but I cannot use the SIM CARD. A message asks me to reboot to activate the mobile data, but it appears at every logon and I cannot surf (no internet connection)... Is there a way to fix?

Hi,
in most cases it should be enough to ignore this message, check the APN settings if they are active.

 

[woodoste]

Hi, thank you for your quickly reply, I just had to ignore that message (it resets my APN settings). Is there a way to disable it?
Anyway thank you such, my old lil tablet is Flash now!

Cheers

 

[html6405]

Is there a way to disable it?

Not yet, but I have an idea how I could disable this in future builds.

Anyway thank you such, my old lil tablet is Flash now!

Great .

 

[hyssar]

Dear developer. I apologize for my bad English. I am trying to install the last lineage-16.0-20211007-html6405-n8000.zip from Oct 07, 2021. Twice pumped, but the problem remains. First of all I installed the service N8000XXSDQA5 | 4.4.2 | 01/05/2017 | 2451855 | Russia. Then after one installed TWRP-3.5.0_9-0-N8000. Everything was established normally. Threw away Lineage-16.0-20211007 and Open_Gapps-Arm-9.0-Pico on the USB flash drive. Inserted into the tablet. I go into the TVP, I do all the wipes, then I choose the firmware and additionally gaps. I stitched. The firmware passes without problems. Reboot into the system. Everything goes for 2-3 minutes. The original screen opens and here is the problem! I choose the language and then "an error occurred in the setup application" !! And further in any way! 3 times reinstalled and three times in the error settings. Tell me what to do?

 

[html6405]

Dear developer. I apologize for my bad English. I am trying to install the last lineage-16.0-20211007-html6405-n8000.zip from Oct 07, 2021. Twice pumped, but the problem remains. First of all I installed the service N8000XXSDQA5 | 4.4.2 | 01/05/2017 | 2451855 | Russia. Then after one installed TWRP-3.5.0_9-0-N8000. Everything was established normally. Threw away Lineage-16.0-20211007 and Open_Gapps-Arm-9.0-Pico on the USB flash drive. Inserted into the tablet. I go into the TVP, I do all the wipes, then I choose the firmware and additionally gaps. I stitched. The firmware passes without problems. Reboot into the system. Everything goes for 2-3 minutes. The original screen opens and here is the problem! I choose the language and then "an error occurred in the setup application" !! And further in any way! 3 times reinstalled and three times in the error settings. Tell me what to do?

Hi,
I don't know what the problem is in your case, but what I would do is:

• Reboot into TWRP
• Do a factory reset and wipe system
• Check the md5 sum of the ROM file and re-download it if necessary
• Download an earlier gapps package, some people reported that there were problems with a recent version
• Install the ROM
• Install without any reboot the gapps
• Reboot and try again

 

[FanboyStudios]

A

For this you will have to modify the ramdisk and delete

swapon_all /fstab.smdk4x12

in the init.target.rc.

Also, you could delete the
/dev/block/zram0

line in the fstab.

Also pegagsusq really sucks. It's biased towards battery life, and has low performance. Changing it to ondemand would be better. At least ondemand tries to keep more balance. It's extremely annoying to see my device taking 5 minutes to start up and calm down to only be somewhat-ish usable.

BTW you should change the max clock speed to 1600 MHz. Anything higher than this causes forced immediate shutdown of the device.

As for Z-RAM, it's really not necessary and actually hurts the performance as it uses more CPU resources since it has to compress and decompress programs being used... which also increases battery consumption.

 

[html6405]

Changing it to ondemand would be better

I had the best stability with pegagsusq in my tests.

It's biased towards battery life, and has low performance

I had a really bad battery experience with ondemand, but everybody can change the default governour with kernel aduiator for example.

Anything higher than this causes forced immediate shutdown of the device.

This is why I've set the value to 16000 MHz.

BTW you should change the max clock speed to 1600 MH

I had this in the early stages, but people wanted that I unlock higher frequencies.
Some devices run more stable with higher values, some not, I wouldn't recommend it.

As for Z-RAM, it's really not necessary and actually hurts the performance as it uses more CPU resources since it has to compress and decompress programs being used... which also increases battery consumption.

Well, people claimed because of running out of RAM and I had many last_kmsg's because of that, it was necessary, maybe not for everybody, but for most.
Maybe we would be safe if I set the device to low_ram, but then some functions would be missing like pip,
multiuser support etc.
It's not easy to make a ROM perfect for everybody .

 

[FanboyStudios]

I had the best stability with pegagsusq in my tests.

I had a really bad battery experience with ondemand, but everybody can change the default governour with kernel aduiator for example.

This is why I've set the value to 16000 MHz.

I had this in the early stages, but people wanted that I unlock higher frequencies.
Some devices run more stable with higher values, some not, I wouldn't recommend it.

Well, people claimed because of running out of RAM and I had many last_kmsg's because of that, it was necessary, maybe not for everybody, but for most.
Maybe we would be safe if I set the device to low_ram, but then some functions would be missing like pip,
multiuser support etc.
It's not easy to make a ROM perfect for everybody .

For RAM it's probably better to tweak LMK, because Z-RAM kills performance.