• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

LineageOS 16.0 Android 9 for GT-N8000 GT-N8010 GT-N8013 GT-N8020

Search This thread

Ognennuj01

New member
Mar 26, 2019
1
0
Hello! I have encountered some problem. Device discharged and switched off, i tried to switch on, logo of downloading Lineage OS appeared and nothing happened, device doesn't go to working status, Lineage OS is constantly downloading but can't do that. And i can't enter TWRP. After logo of TWRP, Lineage OS downloading logo appears.
 

rafa3944

New member
Mar 10, 2019
1
0
I'm having a similar issue. I can boot into download mode only. When I try to boot into recovery, it shows the TWRP logo for a few seconds and the device reboots. Lineage gets stuck on the loading screen forever. I tried to go back to stock through Odin and repartition with an appropriate PIT file but I had no success, it tries to boot into Lineage. I also tried the NAND erase option on Odin, but it always fails and doesn't continue.
 

html6405

Recognized Developer
Jan 15, 2016
1,393
1,262
Lineage OS downloading logo appears.
I guess you mean the download mode? This doesn't have anything to do with LineageOS.
If your device can't enter TWRP and boot the system up, it could be that your eMMC is faulty.
I'm having a similar issue. I can boot into download mode only. When I try to boot into recovery, it shows the TWRP logo for a few seconds and the device reboots. Lineage gets stuck on the loading screen forever. I tried to go back to stock through Odin and repartition with an appropriate PIT file but I had no success, it tries to boot into Lineage. I also tried the NAND erase option on Odin, but it always fails and doesn't continue.
It could be the same problem in your case.
If you tried to flash a stock rom and it didn't change anything, your eMMC died and needs to be replaced.

I'm doing the eMMC replacements since the Samsung Galaxy S3 and still doing it nowadays on the n80xx devices.
 

agassparkle

Senior Member
Jun 2, 2011
66
4
when i try to use odin when android running i see ID:COm is com4. But when i am in adb mode ID:com is empty.
And when i try to load the md5 file odin gets not responding. What am i missing ?

And this is what smart switch says. I have a GT-N8010.
1632226026097.png
 

agassparkle

Senior Member
Jun 2, 2011
66
4
I guess you mean thea odin mode / download mode.
ADB is the android debuggin bridge, this is enabled when you allow USB-Debugging.
Download the TWRP "img.tar" and load it under AP.
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..

is this correct ? Been like this for the past 10 mins

and got a big red fail.

Got it. Thank you
 
Last edited:

raichea

Member
Mar 16, 2013
9
2
www.grapevyne.com
I recently installed this version of Lineage on my GT-N8010 (was running stock 4.4.1). Although I'd looked at doing this for some time (years - started looking with a much earlier version of Lineage), I hadn't actually needed to upgrade. I was forced into trying by not being able to use a couple of apps I wanted. It was very straightforward except I wasn't quite sure where to save the image files on internal storage, but it turned out it didn't matter much.

When loading GApps, I tried several versions - micro, nano and then pico - but only pico would fit. I didn't find any info about expanding available space.
 
  • Like
Reactions: agassparkle

agassparkle

Senior Member
Jun 2, 2011
66
4
I recently installed this version of Lineage on my GT-N8010 (was running stock 4.4.1). Although I'd looked at doing this for some time (years - started looking with a much earlier version of Lineage), I hadn't actually needed to upgrade. I was forced into trying by not being able to use a couple of apps I wanted. It was very straightforward except I wasn't quite sure where to save the image files on internal storage, but it turned out it didn't matter much.

When loading GApps, I tried several versions - micro, nano and then pico - but only pico would fit. I didn't find any info about expanding available space.
I did the exact same thing when i realized there were several other sizes. And got it to work and it is working very nice. Turn off and on faster than before. Thank you very much.

Now i have to find something better for my note 3 if there is any :)
 
  • Like
Reactions: RETIEF

html6405

Recognized Developer
Jan 15, 2016
1,393
1,262
Yes , all problems was because i wasn't experienced enough.

But when i try to install gapps, i am getting Insufficient strage space in system partition. Is there a way to make some space on the system partition ?
When loading GApps, I tried several versions - micro, nano and then pico - but only pico would fit. I didn't find any info about expanding available space.
Yes, there is only space for pico gapps on our system partition (1.3GB).
It is possible to expand the system partition if you resize data and move all partitions between.

I did this on all my devices to be able to install GSI's. (Most of them need up to 2 GB).

I you really need this, I could write a tutorial, but I still recommend pico gapps because bigger packages will slow the system down.
 

raichea

Member
Mar 16, 2013
9
2
www.grapevyne.com
Yes, there is only space for pico gapps on our system partition (1.3GB).
It is possible to expand the system partition if you resize data and move all partitions between.

I did this on all my devices to be able to install GSI's. (Most of them need up to 2 GB).

I you really need this, I could write a tutorial, but I still recommend pico gapps because bigger packages will slow the system down.
Pico seems to offer all I need, thanks. I guess a tutorial about expanding the system partition might be useful for someone but I don't think I'll be needing it anytime soon.

Thanks for your efforts.
 
  • Like
Reactions: html6405

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Update 29.09.2021:
    • created a fix if an app set's a video resolution higher than full HD.
    2
    Update 30.09.2021:
    • Refixed BT
    • Fixed new introduced charging bug
    • Security patch level 05.09.2021
    1
    Update 07.10.2021:
    • Fixed MTP connection for Windows.
    1
    Thanks for the rom html6405!
    Just made an account to let everyone know that there is an issue with the latest gapps version (12 October 2021). It fails on setup with "android setup keeps stopping".
    Previous version worked fine (I think I tried like 10 times before downgrading xD)
    1
    This device has an arm architecture...
    So do I have to go back into recovery via power button and volume and wipe and then install rom and gapps and it may work or any other suggestions?
    I don't see the problem, but theoretically a factory reset should be enough if you've installed the correct gapps (and not arm64).
  • 41
    Code:
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    *
    */


    Hi,

    here you can find my LineageOS 16.0 for the Samsung Galaxy Note 10.1.
    At first I want to thank @forkbomb444, @rINanDO, @ChronoMonochrome and all the others who are working on the exynos 4 devices, you deserve it.

    I'm working nearly every day to improve our N80xx devices and here you get a already stable version.

    Here you can see what's working / not working:

    N8000, N8010, N8013, N8020:
    Boot
    Audio
    Bluetooth
    Graphics
    Cameras
    Sensors
    Wifi
    USB
    Video playback (HW/SW)
    OTA Updates
    RIL N8000, N8020
    GPS, not sure if completely
    Tethering via USB, WIFI and Bluetooth
    consumerir transmitter
    • Main camera sometimes can't take a picture in full resolution, you could simply reopen the app and retry, or you lower the resolution.
    • GPS sometimes looses the sattelites, after this error occur's reopen completely your navigation app.



    If you are going to use Gapps,
    I recommend to use the pico package!
    https://opengapps.org/
    For the others, you can use microG if you want, I've enabled signature spoofing.


    Do you like my work?
    Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
    I'm doing this in my free time and it also costs a lot of money to buy hardware.

    donate

    You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /system/etc/gps.conf.
    Or you try GPS Server Optimizer app for a faster 3D fix.
    For both methods you need root rights.
    XDA:DevDB Information
    [ROM][9.x][N8000/N801x/N8020][STABLE] LineageOS 16.0, ROM for the Samsung Galaxy Note 10.1

    Contributors
    html6405
    Source Code: https://github.com/html6405

    ROM OS Version: 9.x Pie
    ROM Kernel: Linux 3.x
    ROM Firmware Required: TWRP 3.3.0
    Based On: LineageOS

    Version Information
    Status:
    Stable
    Release Date: 2020-12-15

    Created 2020-10-26
    Last Updated 2021-10-07
    11
    Update 15.12.2020:
    • programmed button in language and input settings to enable / disable pointer icon.
      (like we had it in previous lineage versions)
    • replaced icon with original smaller one from stock rom
    Only via OTA.
    10
    Update 07.12.2020:
    • included 60Hz camera parameter
    • fixed screen cast
    • partly reverted Nov. 24th update, hope that the charging bug is gone now
    • improved auto brightness
    • included GPS fix improvement suggestion in initial post
    7
    Hey, I just installed this to n8005 and you saved me from buying a new tablet. It works beyond my expectations. This is 8+ years old device after all. You are also helping environment too. Companies should do what you are doing instead of removing chargers to protect the environment. You seriously deserve donation. Have a nice day
    6
    I'm sorry people,
    because I've created a new domain wifi related,
    it made some existing rules uneffective.

    I'm working hard to run selinux without any neverallow rules (I'm nearly there) to provide the best security.

    To get wifi working again, type with your PC or terminal emulator:

    adb shell (only with PC)
    su
    setenforce 0

    and wifi will work again, there will be another update today with the new fixes.