• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

LineageOS 16.0 Android 9 for GT-N8000 GT-N8010 GT-N8013 GT-N8020

Search This thread

hqurve

New member
Nov 28, 2021
4
0
Hi, when I flash the 8000 rom, it never get past the boot screen (the animation freezes). Any idea on what to do?
 

html6405

Recognized Developer
I don´t mind the pouse pointer when I coonect a mouse via BT, to be honest. I actually quite liked it - that it recognized connected device, either mouse (mouse pointer) or the S-Pen (the S Pen "dot").
Ok, then why are you asking :D?
Hi, when I flash the 8000 rom, it never get past the boot screen (the animation freezes). Any idea on what to do?
There could be many reasons, did you install the ROM clean? (system wipe and factory reset at least?)
Is data and cache formatted as ext4?
Are they mountable in TWRP?
 

sebastien4444

New member
Nov 29, 2021
1
0
Hi !
I just get a Samsung Galaxy Note 10.1 GT-N8010 running on Android 4.1.2 and I would like to upgrade it.
It's been a long time I did'nt use custom rom etc... (last time, I think it was on my own Samsung Galaxy 3...) so I'm very sorry for that dumb question :
What do I have to do to flash this ROM (lineage-16.0-20211007-HTML6405-n8010.zip) on my Galaxy Note 10.1 GT-N8010.
I search on this forum and tried to understand but I don't know where to begin :'(

Thank you to the person who will be nice enough to answer that (or at least give me a link where I can get this information).
 

hqurve

New member
Nov 28, 2021
4
0
There could be many reasons, did you install the ROM clean? (system wipe and factory reset at least?)

Yes. Also, just for a sanity check. Im going to write what I did and test again

1) Enter twrp (3.6.0_9-0)
2) Click wipe
3) Format data and enter yes
4) Swipe to factory reset
5) Install the lineage-16.0-20211007-HTML6405-n8000 build
6) Reboot

Additional information (may be helpful):
Yesterday, I did a factory reset on the device (from within android) and then installed twrp using odin. After installation of twrp, I booted into it, formatted and factory reset and then attempted to install linage.

Is data and cache formatted as ext4?
Are they mountable in TWRP?

I am unsure how to check this. However, when I ran "format data", it said that it was formatting using mk_ext4
 

html6405

Recognized Developer
Yes. Also, just for a sanity check. Im going to write what I did and test again

1) Enter twrp (3.6.0_9-0)
2) Click wipe
3) Format data and enter yes
4) Swipe to factory reset
5) Install the lineage-16.0-20211007-HTML6405-n8000 build
6) Reboot

Additional information (may be helpful):
Yesterday, I did a factory reset on the device (from within android) and then installed twrp using odin. After installation of twrp, I booted into it, formatted and factory reset and then attempted to install linage.



I am unsure how to check this. However, when I ran "format data", it said that it was formatting using mk_ext4
Hmm should be ok, from which version did you come from?
Thank you! btw does this update oveclock the CPU already do 1.6? Really dunno how to check/do it, was trying to search for it but not kernel around for N8020 only the other N8xxx models I guess.
I've overclocked the CPU to 1600 MHz in this ROM, this value is completely stable.
 
  • Love
Reactions: Trustwizard

html6405

Recognized Developer
I dont remember (it isnt my device). I firstly wiped it and then updated it until it said that there were no more updates. After that, I used odin to flash twrp and then attempted to install lineage.
Hmm ok.
Then I would recommend to flash the latest stock ROM to update the bootloader,
check if the device works and start from zero.
 

jrjossie

New member
Dec 1, 2021
2
0
Good night first of all thank you very much for your contribution so far it is working normally but neither the sim nor the pen recognizes me. Will you know why or how to solve this?
 

martesch1

Member
Mar 15, 2018
5
3
I have problems to flash the new TWRP 3.6.0_9.0 from the recovery and with the TWRP-App:
I tried from the recovery: image is too large
I tried with the TWRP App: flash failed!

Any solution?

Installed is: twrp 3.5.2_9-0 n8000
 

Top Liked Posts

  • There are no posts matching your filters.
  • 3
    Just wanted to say thanks @html6405 and make a donation for sharing your custom rom, hard work and skills with us, bringing new life to this old tablet. I installed this on both mine and my Dads as he couldn't use certain apps with the old android 4.4.2 original firmware. Thought this one was the best option at the moment to get most usage. Amazing work! Thanks again Paul and a happy Frank (my Dad) :D Donation to follow (y)
    1
    Hi @html6405, my n8000 is running LineageOS 14 but the performance is pretty average. With this Lineage 16 do you think the performance is better?
    Thanks for the work.
    It alway's depends on your installation, using apps etc...
    But in general Android 7 can run faster than Android 9 on these devices.
    I would simply give it a try.
    1
    It's also empty :/, are root permissions granted?
    Yes.. Let me.try again later tonight…
    1
    Update 09.01.2022:
    • Reverted all decoder modifications from the last 3 updates
    • Fixed SIM PIN unlock bug for n8000
    Hopefully this can be the final version.
    09.01.2022 version works without problem, thank you for your efforts..

    Regards..
    1
    On this tablet, which cable you use is important. The OEM cable works. Other cables frequently charge, but not connect to the computer. Also my Windows 11 machine doesn't see any android devices.
    I had 5gHz issues until the last two updates. For me, everything is working fine now.
    I would check your cable and make sure you are on the January 2022 rom.
    If the OEM cable works and the others don't it's self explanatory that the other ones you have are broken. I use fake ones and they work fine, I can exchange files with it as well as the OEM one that I have.

    As for windows 11, it's a mess. Driver support with windows 11 isn't the best nor is it better than windows 10. So it's not surprising it can't find the device.
    You most likely need to find the USB driver from Samsungs website and then try to install it. Though I am not sure whether it will work
  • 46
    Code:
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    *
    */


    Hi,

    here you can find my LineageOS 16.0 for the Samsung Galaxy Note 10.1.
    At first I want to thank @forkbomb444, @rINanDO, @ChronoMonochrome and all the others who are working on the exynos 4 devices, you deserve it.

    I'm working nearly every day to improve our N80xx devices and here you get a already stable version.

    Attention: disable your SIM-PIN with a different device, otherwise it could get locked.

    Here you can see what's working / not working:

    N8000, N8010, N8013, N8020:
    Boot
    Audio
    Bluetooth
    Graphics
    Cameras
    Sensors
    Wifi
    USB
    Video playback (HW/SW)
    OTA Updates
    RIL N8000, N8020
    GPS, not sure if completely
    Tethering via USB, WIFI and Bluetooth
    consumerir transmitter
    • Main camera sometimes can't take a picture in full resolution, you could simply reopen the app and retry, or you lower the resolution.
    • GPS sometimes looses the sattelites, after this error occur's reopen completely your navigation app.



    If you are going to use Gapps,
    I recommend to use the pico package!
    https://opengapps.org/
    For the others, you can use microG if you want, I've enabled signature spoofing.


    Do you like my work?
    Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
    I'm doing this in my free time and it also costs a lot of money to buy hardware.

    donate

    If you don't like it, reboot into recovery and type the following command:
    You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /system/etc/gps.conf.
    Or you try GPS Server Optimizer app for a faster 3D fix.
    For both methods you need root rights.
    XDA:DevDB Information
    [ROM][9.x][N8000/N801x/N8020][STABLE] LineageOS 16.0, ROM for the Samsung Galaxy Note 10.1

    Contributors
    html6405
    Source Code: https://github.com/html6405

    ROM OS Version: 9.x Pie
    ROM Kernel: Linux 3.x
    ROM Firmware Required: TWRP 3.3.0
    Based On: LineageOS

    Version Information
    Status:
    Stable
    Release Date: 2020-12-15

    Created 2020-10-26
    Last Updated 2022-01-09
    11
    Update 15.12.2020:
    • programmed button in language and input settings to enable / disable pointer icon.
      (like we had it in previous lineage versions)
    • replaced icon with original smaller one from stock rom
    Only via OTA.
    10
    Update 07.12.2020:
    • included 60Hz camera parameter
    • fixed screen cast
    • partly reverted Nov. 24th update, hope that the charging bug is gone now
    • improved auto brightness
    • included GPS fix improvement suggestion in initial post
    7
    Hey, I just installed this to n8005 and you saved me from buying a new tablet. It works beyond my expectations. This is 8+ years old device after all. You are also helping environment too. Companies should do what you are doing instead of removing chargers to protect the environment. You seriously deserve donation. Have a nice day
    6
    I'm sorry people,
    because I've created a new domain wifi related,
    it made some existing rules uneffective.

    I'm working hard to run selinux without any neverallow rules (I'm nearly there) to provide the best security.

    To get wifi working again, type with your PC or terminal emulator:

    adb shell (only with PC)
    su
    setenforce 0

    and wifi will work again, there will be another update today with the new fixes.