• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

LineageOS 16.0 Android 9 for GT-N8000 GT-N8010 GT-N8013 GT-N8020

Search This thread

Sid957

Member
Nov 16, 2018
6
0
It also could be that your pen is faulty, do you have any other pen from an other Note to test? (all wacom pens should work)
No ! I do not have any.
I just checked: my stylus works a little bit if I press on it very hard.
Before deciding to buy a new one, is there a way to check that it is really the stylus that poses a problem?
Or a solution to fix it ?
 

html6405

Recognized Developer
No ! I do not have any.
I just checked: my stylus works a little bit if I press on it very hard.
Before deciding to buy a new one, is there a way to check that it is really the stylus that poses a problem?
Or a solution to fix it ?
The only way to check this is flashing back to stock and confirm if it's working or not.
 

Sid957

Member
Nov 16, 2018
6
0
It also could be that your pen is faulty, do you have any other pen from an other Note to test? (all wacom pens should work)
Unfortunately no. I have no other stylus .
But glad that my old tablet is working again, I've just ordered a new one. I have to wait for its delivery now.
Thanks a lot for your help
 

Nemo415

New member
Dec 8, 2021
2
1
Hi, it could be, that your modem is to old,
try flashing mine:

Type:

adb shell
su
dd if=/sdcard/modem.bin of=/dev/block/mmcblk0p7

Hi @html6405

I just want to say a HUGE thank you for all the work you have done.

I just finished flashing the rom now. and was delighted that my tablet now has a good few years ahead.

I saw the message on the stock rom about youtube not being supported anymore and decided to give your rom a try.

On the sim card not detected issue, I tried the Odin flash, but that failed... I tried using adb and it also failed... so I read carefully and see you mentioned TWRP... So i rebooted in to recovery and while in recovery i ran the dd command line you posted (After compying the modem.bin to the root of the storage)... and Voila... it worked.
 
  • Like
Reactions: html6405

Trustwizard

Member
Nov 27, 2021
7
1
I'm having some troubles with streaming apps, got the graphics with green pixels on the middle and image doesn't fit very well. In some apps like Vodafone TV I can resize going to menu (square button) and returning to the app (its a TV app you can see TV channels).
Cannot use Stadia (from google) streaming games the graphics goes green in the middle and its unplayable throught streaming apps, need to try Geforce Now too... any hint or workaround?

Thank you!
 

DadoOo Bot

New member
Dec 9, 2021
2
0
Hello, I have installed the last version of Lineage 16 and Gapp pico :
- lineage-16.0-20211007-HTML6405-n8000.zip
- open_gapps-arm-9.0-pico-20211207.zip

There is a trouble at start-up. After configuring wifi, my N800 stay on "searching for updates" indefinitely...
I try to ingnored the step et check my wifi connection. Wifi is working well.

I found some informations about this trouble, but i can't find solution :
- https://github.com/opengapps/opengapps/issues/732
- https://github.com/opengapps/aosp_build/issues/212

Have you any idea to solve this problem ?

Thanks a lot
 

html6405

Recognized Developer
Have you any idea to solve this problem ?
Try the new version, if the problem still exists, try to use an older gapps package,
this could be the reason.
I'm having some troubles with streaming apps, got the graphics with green pixels on the middle and image doesn't fit very well. In some apps like Vodafone TV I can resize going to menu (square button) and returning to the app (its a TV app you can see TV channels).
Cannot use Stadia (from google) streaming games the graphics goes green in the middle and its unplayable throught streaming apps, need to try Geforce Now too... any hint or workaround?

Thank you!
Would be nice if you could check this with the new version.
 

Trustwizard

Member
Nov 27, 2021
7
1
Try the new version, if the problem still exists, try to use an older gapps package,
this could be the reason.

Would be nice if you could check this with the new version.
updated to the new version atm and still get the pixelized problem in the same apps as I told before, looks like its a resize problem on Vodafone TV I can do a workaround geting to menu and going back, but not on Stadia app.

Opening clash of clans games sometimes some graphics are missing to.

Could be a problem with arm_9.0_pico? Should I use a arm64_9.0_pico? I don't have any problem besides this.

Note: It pops-up a message for sim card after I put the pin on N8020 but I just ignore and its all fine :)
 
Last edited:

html6405

Recognized Developer
For your information, OpenGapps had reopen the issue on Github : https://github.com/opengapps/opengapps/issues/732
Great, than I'm sure it will be solved soon.
updated to the new version atm and still get the pixelized problem in the same apps as I told before, looks like its a resize problem on Vodafone TV I can do a workaround geting to menu and going back, but not on Stadia app.

Opening clash of clans games sometimes some graphics are missing to.
Ok than I'm sorry, I don't have a solution for this yet.
Could be a problem with arm_9.0_pico? Should I use a arm64_9.0_pico? I don't have any problem besides this.
Yes it could be a problem with the gapps package, sometimes it helps to try an older bundle.
Only arm is compatible with our devices.
Note: It pops-up a message for sim card after I put the pin on N8020 but I just ignore and its all fine
Exactly, just ignore it :).
 

SteelK

Member
Jan 30, 2015
16
0
24
Update 09.12.2021;
  • Synced with latest LineageOS sources (security patch level 05.11.2021)
  • Fixed tethering
  • Replaced mouse cursor with stylus icon -> use mouse cursor for pen now
  • Made NetGuard support in Kernel
  • Updated OpenCamera and Via browser
  • N8020: some RIL fixes
I got very strange behavior after updating ...

First, I had BootLoop after the update.
Also, after the update, any restored Lineage 16 backup from TWRP did not load, it hung on Bootlogo Samsung.

Backup 4.4.2, at the same time, started.

As a result, the firmware of the archive with the firmware with wipes helped, and then the firmware of the data section from the backup.

My config:
N8000
TWRP 3.5.2-9.1
MicroG
Magisk Canary (No zygisk)

Updated from 20211007 to 20211209.
 

html6405

Recognized Developer
I got very strange behavior after updating ...

First, I had BootLoop after the update.
Also, after the update, any restored Lineage 16 backup from TWRP did not load, it hung on Bootlogo Samsung.

Backup 4.4.2, at the same time, started.

As a result, the firmware of the archive with the firmware with wipes helped, and then the firmware of the data section from the backup.

My config:
N8000
TWRP 3.5.2-9.1
MicroG
Magisk Canary (No zygisk)

Updated from 20211007 to 20211209.
OK, I have no idea what went wrong there. The update package wouldn't get installed if it's corrupted.
 

hqurve

New member
Nov 28, 2021
4
0
Hmm ok.
Then I would recommend to flash the latest stock ROM to update the bootloader,
check if the device works and start from zero.
Thanks, sorry for the delayed response.

I was able to flash stock rom from here https://galaxyfirmware.com/model/GT-N8000/PRO/N8000XXSDQA3 (kitkat 4.4.2) and it booted well and worked. (I havent tested the cellular connection, but wifi can camera etc work).

Afterwards, I flashed version 3.5.2_9-1 of twrp (from https://dl.twrp.me/n8000/twrp-3.5.2_9-1-n8000.img.tar.html),
and booted into it. Afterwards, I rebooted back into the stock rom and again it worked.

Finally, I booted into twrp and installed twrp by following this guide https://lineageosroms.com/install-lineageos/. Upon rebooting, i think it auto rebooted about once or twice then showed the linage logo which eventually froze (as before).
 

Alexrd6

New member
Sep 11, 2014
1
1
Hello! After installing the OTA update from 12/09/21, the bluetooth disappeared, it turns on, but does not find anything. Roll back bluetooth works again.
 
  • Like
Reactions: krupier

Top Liked Posts

  • There are no posts matching your filters.
  • 3
    Just wanted to say thanks @html6405 and make a donation for sharing your custom rom, hard work and skills with us, bringing new life to this old tablet. I installed this on both mine and my Dads as he couldn't use certain apps with the old android 4.4.2 original firmware. Thought this one was the best option at the moment to get most usage. Amazing work! Thanks again Paul and a happy Frank (my Dad) :D Donation to follow (y)
    1
    Update 09.01.2022:
    • Reverted all decoder modifications from the last 3 updates
    • Fixed SIM PIN unlock bug for n8000
    Hopefully this can be the final version.
    09.01.2022 version works without problem, thank you for your efforts..

    Regards..
    1
    On this tablet, which cable you use is important. The OEM cable works. Other cables frequently charge, but not connect to the computer. Also my Windows 11 machine doesn't see any android devices.
    I had 5gHz issues until the last two updates. For me, everything is working fine now.
    I would check your cable and make sure you are on the January 2022 rom.
    If the OEM cable works and the others don't it's self explanatory that the other ones you have are broken. I use fake ones and they work fine, I can exchange files with it as well as the OEM one that I have.

    As for windows 11, it's a mess. Driver support with windows 11 isn't the best nor is it better than windows 10. So it's not surprising it can't find the device.
    You most likely need to find the USB driver from Samsungs website and then try to install it. Though I am not sure whether it will work
    1
    Have you come across this/similar before?
    I'm sorry but this could be a eMMC hardware issue, did you try to reflash the stock ROM?
    It could be, that your eMMC switched to a read only state, which it does as a EOL behaviour.
  • 46
    Code:
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    *
    */


    Hi,

    here you can find my LineageOS 16.0 for the Samsung Galaxy Note 10.1.
    At first I want to thank @forkbomb444, @rINanDO, @ChronoMonochrome and all the others who are working on the exynos 4 devices, you deserve it.

    I'm working nearly every day to improve our N80xx devices and here you get a already stable version.

    Attention: disable your SIM-PIN with a different device, otherwise it could get locked.

    Here you can see what's working / not working:

    N8000, N8010, N8013, N8020:
    Boot
    Audio
    Bluetooth
    Graphics
    Cameras
    Sensors
    Wifi
    USB
    Video playback (HW/SW)
    OTA Updates
    RIL N8000, N8020
    GPS, not sure if completely
    Tethering via USB, WIFI and Bluetooth
    consumerir transmitter
    • Main camera sometimes can't take a picture in full resolution, you could simply reopen the app and retry, or you lower the resolution.
    • GPS sometimes looses the sattelites, after this error occur's reopen completely your navigation app.



    If you are going to use Gapps,
    I recommend to use the pico package!
    https://opengapps.org/
    For the others, you can use microG if you want, I've enabled signature spoofing.


    Do you like my work?
    Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
    I'm doing this in my free time and it also costs a lot of money to buy hardware.

    donate

    If you don't like it, reboot into recovery and type the following command:
    You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /system/etc/gps.conf.
    Or you try GPS Server Optimizer app for a faster 3D fix.
    For both methods you need root rights.
    XDA:DevDB Information
    [ROM][9.x][N8000/N801x/N8020][STABLE] LineageOS 16.0, ROM for the Samsung Galaxy Note 10.1

    Contributors
    html6405
    Source Code: https://github.com/html6405

    ROM OS Version: 9.x Pie
    ROM Kernel: Linux 3.x
    ROM Firmware Required: TWRP 3.3.0
    Based On: LineageOS

    Version Information
    Status:
    Stable
    Release Date: 2020-12-15

    Created 2020-10-26
    Last Updated 2022-01-09
    11
    Update 15.12.2020:
    • programmed button in language and input settings to enable / disable pointer icon.
      (like we had it in previous lineage versions)
    • replaced icon with original smaller one from stock rom
    Only via OTA.
    10
    Update 07.12.2020:
    • included 60Hz camera parameter
    • fixed screen cast
    • partly reverted Nov. 24th update, hope that the charging bug is gone now
    • improved auto brightness
    • included GPS fix improvement suggestion in initial post
    7
    Hey, I just installed this to n8005 and you saved me from buying a new tablet. It works beyond my expectations. This is 8+ years old device after all. You are also helping environment too. Companies should do what you are doing instead of removing chargers to protect the environment. You seriously deserve donation. Have a nice day
    6
    I'm sorry people,
    because I've created a new domain wifi related,
    it made some existing rules uneffective.

    I'm working hard to run selinux without any neverallow rules (I'm nearly there) to provide the best security.

    To get wifi working again, type with your PC or terminal emulator:

    adb shell (only with PC)
    su
    setenforce 0

    and wifi will work again, there will be another update today with the new fixes.