• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory
Search This thread

vanshksingh

Member
Dec 28, 2020
17
3
/*
* Your warranty is no longer valid.(or it isn't ? who am I to judge)
*
* I am not responsible for bricked devices, dead SD cards, broken touchscreens,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this package
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*




LineageOS 17 How to install SM-J8 ~vks
DISCLAIMAR: It is a gsi and not a ROM. I am not responsible for anything ,
proceed at your own risk , All files are properties of their respective owner.

What works (TESTED ON SM-J810G)
-Calls , SMS
-Data (Enable LTE in data setting , default edge)
-Fingerprint
-Both Camera and Flash
-Audio
-Screen Mirroring
-Basically everything

What dosen't work
-No bugs , Everything works , stable too.

IMPORTANT:You will need an android10 stock vendor.

The incuded .zip contains
-Odin3
-Odin Flashable TWRP , By @goldfish07 (Telegram grpoup = https://t.me/galaxyj8 )
-Tryfix lockscreen.zip
-Magisk v21.zip
-Disable-Dm-Verity.zip
-Open-gapps-pico-arm-10.zip (Propietary)
-Lineage-17.img (Non compressed/zipped iso)

Unzip the container file , and copy all these to sd card or an otg pendrive(recomended)
, PC MTP Dosent work in recovery.
Procedure.
1. Flash TWRP with ODIN (Lookup for procedure , and install drivers)
2. Boot into Custom Recovery
3. Wipe > Format_Data > Type yes (Swipe to reset dosen't work, data backup-
-would be a good idea)
4.Navigate to your copied files , select Flash image > Lineage-17.img , Flash in system.
5.Go to wipe (after flash), Advanced wipe > System > Repair or change File System >-
-Resize File System (This Prevents Error70 Insufficient Space in Gapps)
6.Flash Gapps (select Flah from Zip) , If flash shows Error70 , Repeat From Step 3.
7.Flash Disable-Dm-Verity.zip (To prevent Stuck on boot animation of the os)
8.Flash Magisk v21.zip (To prevent Bootloop to bootloader , and to-
-actually start booting into os ; V20 , V18 dosen't work)
9.Flash Tryfix lockscreen.zip (To get lockscreen secure lock working as well as
fingerprint , and also prevents bootloop due to magisk)
10.Reboot to recovery again , and then to system. (Helps mount files and stuff)
11.Setup and enjoy, to remove the persistent notif , uncheck in setting.

IF YOU NEED ROOT IF IT ISINT THERE ALREADY

1.Reboot to recovery , Flash Magisk v21.zip (Only flash this to prevent bootloop
, and to bootloop to bootloader)
2.Flash Tryfix lockscreen.zip ( To be on the safer side , and prevent bootloop)

3.Enjoy!




Fixed:
1.Bootloop to BootLoader
2.Bootloop
3.Stuck on Bootanimation
4.Secure Lockscreen
5.Gapps Flash Error70 No space
6.FingerPrint
7.Booting

@vanshksingh

 

Attachments

  • Lineage 17 , SM-J8.zip
    740.2 MB · Views: 491

j810guser

Member
Jan 8, 2021
10
0
/*
* Your warranty is no longer valid.(or it isn't ? who am I to judge)
*
* I am not responsible for bricked devices, dead SD cards, broken touchscreens,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this package
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*




LineageOS 17 How to install SM-J8 ~vks
DISCLAIMAR: It is a gsi and not a ROM. I am not responsible for anything ,
proceed at your own risk , All files are properties of their respective owner.

What works (TESTED ON SM-J810G)
-Calls , SMS
-Data (Enable LTE in data setting , default edge)
-Fingerprint
-Both Camera and Flash
-Audio
-Screen Mirroring
-Basically everything

What dosen't work
-No bugs , Everything works , stable too.

IMPORTANT:You will need an android10 stock vendor.

The incuded .zip contains
-Odin3
-Odin Flashable TWRP , By @goldfish07 (Telegram grpoup = https://t.me/galaxyj8 )
-Tryfix lockscreen.zip
-Magisk v21.zip
-Disable-Dm-Verity.zip
-Open-gapps-pico-arm-10.zip (Propietary)
-Lineage-17.img (Non compressed/zipped iso)

Unzip the container file , and copy all these to sd card or an otg pendrive(recomended)
, PC MTP Dosent work in recovery.
Procedure.
1. Flash TWRP with ODIN (Lookup for procedure , and install drivers)
2. Boot into Custom Recovery
3. Wipe > Format_Data > Type yes (Swipe to reset dosen't work, data backup-
-would be a good idea)
4.Navigate to your copied files , select Flash image > Lineage-17.img , Flash in system.
5.Go to wipe (after flash), Advanced wipe > System > Repair or change File System >-
-Resize File System (This Prevents Error70 Insufficient Space in Gapps)
6.Flash Gapps (select Flah from Zip) , If flash shows Error70 , Repeat From Step 3.
7.Flash Disable-Dm-Verity.zip (To prevent Stuck on boot animation of the os)
8.Flash Magisk v21.zip (To prevent Bootloop to bootloader , and to-
-actually start booting into os ; V20 , V18 dosen't work)
9.Flash Tryfix lockscreen.zip (To get lockscreen secure lock working as well as
fingerprint , and also prevents bootloop due to magisk)
10.Reboot to recovery again , and then to system. (Helps mount files and stuff)
11.Setup and enjoy, to remove the persistent notif , uncheck in setting.

IF YOU NEED ROOT IF IT ISINT THERE ALREADY

1.Reboot to recovery , Flash Magisk v21.zip (Only flash this to prevent bootloop
, and to bootloop to bootloader)
2.Flash Tryfix lockscreen.zip ( To be on the safer side , and prevent bootloop)

3.Enjoy!




Fixed:
1.Bootloop to BootLoader
2.Bootloop
3.Stuck on Bootanimation
4.Secure Lockscreen
5.Gapps Flash Error70 No space
6.FingerPrint
7.Booting

@vanshksingh


What is the android 10 stock vendor and how can i get it?
Can i have the j8 vendor zip file?
 

vanshksingh

Member
Dec 28, 2020
17
3
And do i have to delete system, data, cache, etc? or do i flash it over stock?



Vendor is the interface between your hardware and software , and the one sent over OTA sock is what you need , and well if you go do havoc is please follow this guide , just flash havoc instead on lineage


And rest just follow this , I would say don't delete the system flash over it , as it gets formated anyways
 

Darklord071

Member
Mar 31, 2020
28
1

here you can ask from @goldfish07 , he can help in this .
Can you put me in contact with him? I tried mailing him but no reply... Is it possible for you to make a ubuntu touch port for sm-j810g? Or do you have the device tree? Thanks!
 

Top Liked Posts