LineageOS 18.1 [R] [11] (Unofficial) (Beta) Mi Pad 4 Plus (clover)

[sabar_op]

If anyone want to try LineageOS 18.0 (Beta), see this link

Installation instructions :
- Download the zip(s).
- Install Official TWRP 3.4.0 for clover
- Perform a backup of your current ROM (Optional)
- Wipe system / data / cache partitions
- Flash ROM.
- Optional: NikGApps
- Optional: Install Magisk v21.0 for Root.

Basic things should work (Sound, Wifi, BT, GPS, Camera) not check it for others.

 

[buszosbill]

Hello !
No SD card.
Clean installation.
NikGapps-core-arm64

---------- Post added at 07:44 PM ---------- Previous post was at 07:43 PM ----------

 

[rchoi999]

Thank you for the LOS R. Very good rom.
Clean install with Nikgapps omni, found download in Chrome to sd card showing "download pending" and chrome will force close.

 

[hippooo]

Awesome! Thanks!

 

[sabar_op]

Thank you for the LOS R. Very good rom.
Clean install with Nikgapps omni, found download in Chrome to sd card showing "download pending" and chrome will force close.

I didn't use sdcard...it would be help if log is available...

 

[addro]

-----> Have New Update 2020/10/19 I didn't install it, don't know the difference

 

[sabar_op]

-----> Have New Update 2020/10/19 I didn't install it, don't know the difference

Some update in lineageos qcom repo....

 

[sb56637]

Thanks a lot for working on this. I tried the following versions, but they all bootloop (bootsplash, lockscreen visible for a few seconds, then reboots):

lineage-18.0-20201017-UNOFFICIAL-clover_rev0.zip
lineage-18.0-20201018-UNOFFICIAL-clover.zip
lineage-18.0-20201019-UNOFFICIAL-clover.zip

This is with a WiFI-only miPad 4, latest TWRP, complete wipe of everything first.

 

[pndwal]

Thanks a lot for working on this. I tried the following versions, but they all bootloop (bootsplash, lockscreen visible for a few seconds, then reboots):

lineage-18.0-20201017-UNOFFICIAL-clover_rev0.zip
lineage-18.0-20201018-UNOFFICIAL-clover.zip
lineage-18.0-20201019-UNOFFICIAL-clover.zip

This is with a WiFI-only miPad 4, latest TWRP, complete wipe of everything first.

@sabar_op, @sb56637, @amityg

Please keep in mind that there are many reports of bootloops etc using TWRP with Android 11.

TWRP officially supports all devices running Android up to 10, except devices LAUNCHED with 10 or later (having dynamic/logical partitions). There are no versions officially supporting devices running Android 11 to date:

TWRP 3.4.0 does not yet bring support for dynamic/logical partitions, which is required to support devices that launch with Android 10. It does, however, fix support for legacy devices that upgraded to Android 10, but retain the old partition scheme.

https://www.xda-developers.com/twrp...s-support-legacy-devices-upgraded-android-10/

Latest TWRP 3.4.0 arrived in June 2020 w/ support for devices upgraded to Android 10 (only). There's been no further versions. See here:
https://forum.xda-developers.com/ap...v1-universal-systemless-t3432382/post83725859

The solution for most using custom Android 11 based ROMs has been to KEEP STOCK Recovery and use ADB fastboot boot TWRP (NOT flash) command from PC when needing custom recovery functions to flash ROMs etc. This seems to work for most despite having no TWRP fully supporting Android 11.

Nb. To achieve root with MagiskSU, this method is probably even more critical as users are reporting bootloops with TWRP custom recovery (flashed) and Android 11 when flashing Magisk pretty much accross the board.

Nb2. Achieving root with MagiskSU can alternatively be done without custom recovery by flashing Magisk Manager patched boot.img (extracted from ROM) using ADB fastboot flash image command from PC. This may be a less fraught method.

I'm still on LOS 17.1, but the above outlines the approach I intend to take / try soon.

Hope it helps, PW

 

[sabar_op]

Thanks a lot for working on this. I tried the following versions, but they all bootloop (bootsplash, lockscreen visible for a few seconds, then reboots):

lineage-18.0-20201017-UNOFFICIAL-clover_rev0.zip
lineage-18.0-20201018-UNOFFICIAL-clover.zip
lineage-18.0-20201019-UNOFFICIAL-clover.zip

This is with a WiFI-only miPad 4, latest TWRP, complete wipe of everything first.

Can you take the log?
Never try for mipad 4 wifi only, I use mipad 4 wifi-lte, twrp 3.4.0 with previous los17.1 installed and no issue so far...

 

[Enry44]

I tried your room on my mi pad 4 wifi with twrp 3.4.0 no installation problem.

 

[idcom]

Running well on mi pad 4 plus. Really good apart from no sd card. Trying to upload logs.

 

[idcom]

Running well on mi pad 4 plus. Really good apart from no sd card. Trying to upload logs.[/QUOTE]
View attachment 5123311

 

[sabar_op]

Running well on mi pad 4 plus. Really good apart from no sd card. Trying to upload logs.

View attachment 5123311[/QUOTE]

Can't open the attachment...send me a pm for the log link.
A quick question : is sdcard not showing in setting/storage?

 

[sabar_op]

I tried your room on my mi pad 4 wifi with twrp 3.4.0 no installation problem.

Thanks for confirmation...it means no problem with mipad 4 wifi only... :good::good::good:

 

[sb56637]

sabar_op Sure, where can I find the log?

 

[idcom]

Can't open the attachment...send me a pm for the log link.
A quick question : is sdcard not showing in setting/storage?[/QUOTE]
Have PMed you. Settings-≥Storage shows Portable but corrupted. When I format nothing changes.

 

[Alex Kane]

Thanks a lot for working on this. I tried the following versions, but they all bootloop (bootsplash, lockscreen visible for a few seconds, then reboots):

lineage-18.0-20201017-UNOFFICIAL-clover_rev0.zip
lineage-18.0-20201018-UNOFFICIAL-clover.zip
lineage-18.0-20201019-UNOFFICIAL-clover.zip

This is with a WiFI-only miPad 4, latest TWRP, complete wipe of everything first.

This is probably because didn't install a *Gapps package.

 

[sb56637]

Can you take the log?
Never try for mipad 4 wifi only, I use mipad 4 wifi-lte, twrp 3.4.0 with previous los17.1 installed and no issue so far...

This is probably because didn't install a *Gapps package.

Hmm, not sure, LineageOS 17.1 works fine on this tablet without Gapps.

 

[Alex Kane]

Hmm, not sure, LineageOS 17.1 works fine on this tablet without Gapps.

Yeah, but apparently LOS 18.0 beta doesn't.
I tried LOS 18.0 (beta) without gapps first and it would bootloop after reaching the home-screen. Flashing gapps would solve the issue (for me) but I don't use gapps so ... I went back to LOS 17.1.
I also experienced the issue with the sdcard not being properly detected.