• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

LineageOS 19.0 [S] [12] (Unofficial) Mi Pad 4 Plus (clover)

Search This thread

sabar_op

Senior Member
Jun 30, 2010
342
683
Xiaomi Mi Pad 4 Plus
Hi all been using the ROM for sometime and I would say it's stable enough to say stable and the latest update kind of made the ROM what we want to call smooth yet but snappier than before, and I am just wondering if we could make the ROM able to run at higher refresh rate, and also is it some kernel thing? And also appreciate your work @sabar_op

Running higher refresh rate need to be supported by the hardware otherwise it will destroy your device or decrease the device lifetime or unusual behavior of screen. And I dont think that clover screen support to higher than 60 Hz refresh rate.
 
  • Like
Reactions: senseii

GregEden

Senior Member
Feb 6, 2020
157
68
Melbourne
I just tried to update the Netflix app and it no longer appears in the PlayStore and thus will not update. The settings are still saying PlayStore - Device is Certified
 
Hello,

First, thanks for this ROM ! It's good to have android 11 on that tablet that's been abandoned by Xiaomi long ago.

I've been using the rom since the november release and i've been 2 weeks on a clean installation of the 20211230 Lineage release.
I have the following problems, the most anoying being the first
- every boot/reboot fails more than 4 times. The lineage logo animation appears but freezes when drawing the line, then shuts off. I need a very long power key press to reboot the tablet. I noticed than in the animation, every time it reaches the part where the animated circles appear, the boot then proceeds normally.
- i sometimes lose the use of the recents navigation key : nothing happens when i press it, except the button animation. Solved by reboot
- sometimes the status bar only uses the half left part. All icons are there, but rearranged on the left half. Reboot solves it.

Apart from this (the boot problem being the most annoying) the ROM is smooth and pleasant to use !
 

GregEden

Senior Member
Feb 6, 2020
157
68
Melbourne
Under developer options Bluetooth audio codec selection only option is SBC everything else is greyed out and not supported. Any chance to fix this.

19.0-20212130-unofficial version
I have a MiPad 4 8" LTE amd 19.0-20211230 and my Sony headphones connect with aptX HD and that is shown in the settings under bluetooth. I also stream to a bluetooth DAC using LDAC.
OK got it now. In Developer Option with no bluetooth device connected it shows them all greyed out. But once I connect with aptX HD headphones the option show as selectable.
 
Last edited:

jason605

Member
Jan 24, 2015
26
10
Xiaomi Mi Pad 4
LG V60 ThinQ
I have a MiPad 4 8" LTE amd 19.0-20211230 and my Sony headphones connect with aptX HD and that is shown in the settings under bluetooth. I also stream to a bluetooth DAC using LDAC.
OK got it now. In Developer Option with no bluetooth device connected it shows them all greyed out. But once I connect with aptX HD headphones the option show as selectable.
I just unpaired my Sony's and paired them again and now its working. I wish we could use the eq in the Sony app with LDAC or aptx HD. I have the Sony XB900n headphones and enjoy the extra bass, but just set the EQ in JetAudio+
 
  • Like
Reactions: GregEden

seeayesix

Member
Aug 28, 2013
15
0
I have a MiPad 4 8" LTE running with lineage-19.0-20211230-UNOFFICIAL-clover.zip with NikGapps-basic-arm64-12-20211227-signed.zip . My Playstore shows as certified. I do not use nor need Magisk.

I just opened Playstore and searched for and installed Netflix. No problem.
Funny, I did the exact same thing (same files used) on my 8" LTE and Netflix was unavailable. Everything else seem to be working fine though.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 11
    Hi OP

    You are using Pixel build now. Are you continue to update los 19 ?

    Thanks

    I will continue once the los 19.0 source is released officially.
    10
    New update : build date 20211230 (see 1st post for the link), changelog :
    - December security patch
    - Upstream update of lineage source.
    - Kernel update 4.4.296 (thanks to pix106).
    3
    I'm just guessing that 20211129-clover+ is the last release with SELinux enforcing due to December release using new software stack.
    Have I guessed correctly? Anyone? Thanks in advance 😉

    LineageOS Dec build is enforcing....
    2
    clean flashed latest build on a Mi Pad Plus and can confirm SE is disabled for lineage-19.0-20211231-UNOFFICIAL-clover+-4.19

    Yes...it still experimental.
    2
    Dirty flash lineage-19.0-20211230-UNOFFICIAL-clover.zip with NikGapps-basic-arm64-12-20211227-signed.zip over lineage-19.0-20211129-UNOFFICIAL-clover.zip

    So far so good. Nothing to report.
  • 18
    LineageOS 19.0, see this link

    Installation instructions :
    - Perform a backup of your current ROM (optional)
    - Use latest TWRP for clover
    - Reboot into recovery/twrp, format data, then reboot into recovery/twrp again.
    - Flash ROM.
    - Flash GApps (NikGApps is tested) is optional.

    What's working:
    Display, Audio, Bluetooth, Wi-Fi, GPS, fingerprint, sensors, RIL (?), let me know.

    Known issues :
    - Disabled Encryption
    - Lagging to open camera/snap only for 1st time.
    - SELinux is permissive
    - Others that may come from lineage source
    - Magisk but will work with manual patching of boot.img.

    Please post the bug along with log (use syslog).

    Source :

    Kernel : clover
    Device tree : sdm660
    11
    Uploading new rom 20211112 (see 1st post for the link) :
    Changelog :
    - Nov security patch
    - SELinux is enforced
    - Upstream update of lineage source
    - Device is certified without magisk
    - Fix battery icon, support monet, etc...
    11
    Hi OP

    You are using Pixel build now. Are you continue to update los 19 ?

    Thanks

    I will continue once the los 19.0 source is released officially.
    10
    Update : latest version lineage-19.0-20211105-UNOFFICIAL-clover-new.zip pass safetynet.
    10
    New update : build date 20211230 (see 1st post for the link), changelog :
    - December security patch
    - Upstream update of lineage source.
    - Kernel update 4.4.296 (thanks to pix106).