You can use it with root and with no safety net .
Enable MagiskHide from magisk settings and install Pixelify module from GitHub to enable safety net
LineageOS 19.1 (Android 12L) [Signature Spoofing][OTA updates] for S7 Edge Exynos
- Thread starter Ivan_Meler
- Start date
Enable MagiskHide from magisk settings and install Pixelify module from GitHub to enable safety net
Not pix3lify but Pixelify from this link:
Releases · Kingsman44/Pixelify
Magisk module to enables pixel exclusive features and ui - Kingsman44/Pixelify
github.com
New uick fix build is up, Not too many changes in this one just updated clearkey since version used previously caused freezing of some apps
I screwed up installing this release! I did not uninstall Magisk prior to wiping storage and installing.
Could I replace the boot loader (which one might be nice to know (boot and/or sboot) using heimdall?
if so what, if any gotchas should I be aware of?
Thanks
Could I replace the boot loader (which one might be nice to know (boot and/or sboot) using heimdall?
if so what, if any gotchas should I be aware of?
Thanks
reposted link to previous working build till i recompile new build tomorrow, sorry for inconvenience
Do I flash in TWRP or in Magisk?Not pix3lify but Pixelify from this link:
Releases · Kingsman44/Pixelify
Magisk module to enables pixel exclusive features and ui - Kingsman44/Pixelify
Last edited:
I've installed it on magisk (it wouldn't get past the first "volume up" option) and ctosprofile still fails.
All right i'll give this a shot. Do you happen to know if this works on Ivan's Lineage 18.1?
Just tried it, didn't work. Here's my exact process:
- On TWRP flashed LineageOS19, Gapps (NikGapps), Magisk 23
- Reboot to System
- Setup Wifi and Magisk
- On Magisk, Flash Pixelfy from your link
- Chose Pixel 5 spoof
- Didn't choose anything else
- Reboot
- Still failed ctosprofile. Says attestation failed.
Edit: All right, so instead of doing this, I went and found out that I have been using magiskhide props config all wrong this whole time. I've actually done what I needed to do and now it's passing.
Last edited:
And as prommised new build is up with quite a lot of imrpovements even compared to few days old one here is a brief changelog
- Updated Clearkey to 1.4
- Addressed most of selinux denials
- Switched to new AIDL Lights hal
- Upreved audio hal to 7.0
- Switched to new AIDL Vibrator hal
- Disabled configstore which got replaced with props
- Upreved fingerprint hal/service to 1.3
- Removed unused kernel defconfig flag
- Synced with LOS source
Once again big thanks for everyone who supported this project so far as their support helps cover the build server cost and gets me a coffee which greatly helps while debugging and dealing with some device specific quirks and issues
- Updated Clearkey to 1.4
- Addressed most of selinux denials
- Switched to new AIDL Lights hal
- Upreved audio hal to 7.0
- Switched to new AIDL Vibrator hal
- Disabled configstore which got replaced with props
- Upreved fingerprint hal/service to 1.3
- Removed unused kernel defconfig flag
- Synced with LOS source
Once again big thanks for everyone who supported this project so far as their support helps cover the build server cost and gets me a coffee which greatly helps while debugging and dealing with some device specific quirks and issues
Last edited:
for anyone wondering, this build is pretty stable for daily usage. i have not found a breaking bug so far. great rom so far.
Similar threads
- Locked
Top Liked Posts
-
6I havent posted an actual progress update in quite some time so here is some behind the scenes.
- HWC And most of display hals will be updated and open sourced
- Keystore will also be looked into a bit further to see if there are edge cases left where some secure apps break
- OMX again without going into too much details we will see some changes on that end and it will be open sourced
- Camera, well ill just let this one be a surprise for now since it will require most work
Some other small notes since s7 i use to develop this rom on has broken screen (i use scrcpy to mirror screen on pc)
feel free to send me message with any good deals you find on 8890 device be it s7 s7 edge or note fe
And finally HUGE thanks to everyone who supported this project and helped cover the build server cost, thius project really wouldnt be possible without them, They also covered the coffee cost and some stuff like recent keystore fixes really took a long time to debug which indeed required a lot of coffee at night haha. -
9And here we go as prommised, new build with improved in call audio quality and June security update
- Merged June 2022. security update
- Merged June 2022. pixel feature drop (SQ3A.220605.009.A1)
- Improved in-call audio quality drastically
- Addressed few more selinux denials
- Improved general stability and performance
- Cleaned up source
- Synced with LineageOS source
Once again huge thanks to everyone who supported this project, helped cover the build server cost and got me a coffee, this project wouldnt be possible without support of the comunity and s7 wouldnt still be running latest OS with latest security updates over 6 years after launch
18.1 and 17.1 builds will be out over the coming days
Enjoy new build and stay safe6New builds are up here and via ota
- Fixed issues with keystore present in a lot of bank/secure apps like binance
- Fixed issue where setupwizard would crash when adding fingerprint due to bug in keystore
- Cleaned up patches required for build and removed unneeded ones
- Synced with LineageOS source
This was one of hardest things to track down and it prevented some security related apps from working, big thanks to everyone who supported this project and got me coffee (This took over a month on and off time to debug and figure out, one of weirdest error caused by googles keystore changes in android 12) and thanks to those who helped cover the build server cost
Enjoy new build and stay safe6New update will fix in call audio quality
there was a weird bug in audio hal that was causing it.
Big thanks to @Bujiraso for playing with props and audio configs which at the end lead me to finding bug in audio hal.
Now im only waiting for google to push June security update source so I can start compiling builds and release them6I havent posted an actual progress update in quite some time so here is some behind the scenes.
- HWC And most of display hals will be updated and open sourced
- Keystore will also be looked into a bit further to see if there are edge cases left where some secure apps break
- OMX again without going into too much details we will see some changes on that end and it will be open sourced
- Camera, well ill just let this one be a surprise for now since it will require most work
Some other small notes since s7 i use to develop this rom on has broken screen (i use scrcpy to mirror screen on pc)
feel free to send me message with any good deals you find on 8890 device be it s7 s7 edge or note fe
And finally HUGE thanks to everyone who supported this project and helped cover the build server cost, thius project really wouldnt be possible without them, They also covered the coffee cost and some stuff like recent keystore fixes really took a long time to debug which indeed required a lot of coffee at night haha.3
well there is no volte so its expected for data to switch from 4g to 3g or even 2g in call, if it didnt happen you would have no ability to make/recieve voice calls at all -
42
LineageOS 19.1 for hero2lte
Code:/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. */
Working:
- Wifi
- Sound
- mali drivers
- USB tethering
- HW Backed video Playback
- Ril (Mobile data,calls, sms and stuff)
- Sensors
- Buttons
- Bluetooth
- Wifi HotSpot
- MTP
- 2D and 3D gpu acceleration
- HW encoding/decoding
- HWcomposer (HWC)
- Charging with device powered off
- Stuff I didn't test yet
- Camera
- GPS
- Fingerprint Sensor
- Mobicore
- SW codecs
Not Working
-
Keep in mind that some LineageOS features have not been completed yet this is not a device bug and please do not report those
in this rom thread, also do not post bug reports for known issues or bug reports without proper
a) Logcat
b) proc/last_kmsg (or proc/kmsg)
c) data/tombstones
d) dmesg
Install gapps right after installing the rom itself don't try to boot to system before that if you want to use gapps (Or wipe data before installing them)
Make sure gapps you decide to use support android 12L/12.1/Are targetting api level 32
Also make sure you are using latest official TWRP before installing rom older versions do not have proper android 12 support
If you want to use Magisk use latest Magisk Beta (25.0) or Magisk 24.1, there is bug in 24.3 that was fixed after its release that prevents zygisk from working on some devices with 3.18 kernel
Downloads:
Google Drive
Mega.nz
GitHub Releases
MD5: 76ebe060c685faa52e02778293e0e31f
if you want to support the project feel free to buy me some coffee paypal.me/ivanmeler
BTC: bc1qqan6m5tn284g38tu52nalc9x5z4all8z5geq6y
ETH(erc20): 0xB737100035a989fA9EaD13B81af2a32EFe6E1C0f
Donations help cover the build server cost and since I do this in my free time, and also cover the coffee for time spent debugging stuff
Feel free to join telegram group with early builds progress updates and some off topic stuff Join
Based On Android 12L/S
Changelog
XDA:DevDB Information
LineageOS 19.0 for S7, ROM for the Samsung Galaxy S7
Contributors
Ivan_Meler
Source Code: https://github.com/8890q/android_kernel_samsung_universal8890/tree/lineage-19.0
ROM OS Version: Android 12L
ROM Kernel: Linux 3.18.x
Version Information
Status: Stable21Well here are some progress update of whats happening behind the scenes.
Ive given 4.4 kernel from 8895 another go and got even further in porting it to 8890 devices this time around.
Mali drivers are ported so is decon (display and graphics stack is up)
I also managed to port audio drivers, buttons and their backlight.
UFS storage drivers were somewhat pain but i got them to work too
and there is tons of small stuff like fp sensor,thermal driver and misc
Tho im not sure it makes too much sense to do this as 4.4 kernel is eol too at least it has full bpf support which i got working on 8895 devices
Other than that there is not too much going on right now, There are few selinux policies that will have to be dealt with and im still dealing with audio config
tho i could only notice echo and not robotic voice some people noticed so that leads me to believe it could be related to weird modem missmatches
I might release another quick build this month with few audio related improvements
No etas as i do this in my free time, And as always thanks to everyone who supported this project so fat as thanks to them this project and device are still alive on latest android version even 6 years after its release (fun fact s7 series was announced on 21. feb. 2016.) so this is somewhat of a s7 birthday update on progress17After a long wait, here it is, Surprisingly smooth android 12 on s7
check out screenshots here Big thanks to everyone who supported this project so far as they helped cover the build server cost and got me coffee for hours spent debbuging weird issues
enjoy android 12 and stay safe17Well here we go first build of the year, andquite a big one while at it
Here is a brief changelogbut there are a lot more changes you will discover in this build
- Removed duplicate props in vendor and system
- Cleaned up device tree code
- Switched to source built camera provider lib
- Switched to few source built ril related libs
- Addressed more selinux denials
- Fixed volume panel location settings
- Added button backlight
- Added Advanced Reboot
- Added LiveDisplay entry into settings
- Added system side toggle for navigation bar
- Merged January 2022 Security Update
- Merged most of previously missing LineageOS features
- Misc performance and stability improvements
- Synced with LOS source
Updates for Android 11 and 10 should be out next week
About camera, As some of you might be aware camera tends to crash afterprolongued use, Im investigatinga fix for it but due to nature of issue itself it might take time
to figure this out completely and what the best way to deal with it is.
Andfinally huge thanks toeveryonewho supported this and other projects of mine so far as they help me cover the build server cost and get me a coffee with their donations, 2022 marks 5 years since release of s7 and im glad i can help in keeping them alive on latest android version with latest security updates
Hope you all had great holidays, Enjoy new build and stay safe in 202216And here it is build with camera properly fixed
- Fixed issue where camera would stop working after prolonged use
- Misc performance and stability improvements
- Merged some more lineageos features that have been posted to gerrit
- Synced with LOS source
keep in mind February security update has not been merged yet and should be in a few days so ill post new build once security update is ready
This really took a long time to fix properly (almost 2 years i would say) especially without disabling fdsan system wide
This fix will be ported over to 17.1 and 18.1 builds too but before i release them ill hold on till february security update is out
Next thing on my todo list is to somewhat mitigate echo in calls some users are experiencing
Once again big thanks to everyone who supported this project and helped cover the build server cost and got me coffee
Enjoy new build and stay safe
New posts
-
Stuck in EDL Mode and all partions erased please help
- Latest: saduncan084
-
[ROM][UNOFFICIAL][12] LineageOS 19 for Xperia X Compact- Latest: Tri Akbar Fitriana
