You can manually certify your device by following this link : https://www.google.com/android/uncertified/
LineageOS 19.1 (Android 12L) [Signature Spoofing][OTA updates] for S7 Edge Exynos
- Thread starter Ivan_Meler
- Start date
Hi! I must thank you for this great rom. It really revived my old S7 edge. I'm not noticing any bugs, but every few hours Seedvault asks for backup. How can I turn it off completely? It's so annoying. Thanks!
You can either :
- Finish the configuration of Seedvault (write down all the words and then process to back-up your device)
- Change the backup provider from Seedvault to Google
So, you don't have the option in Settings/System/Backup/Change backup provider/Google Account ?
My mistake. I find the option. Now it works. Thanks for help and fast response.
MauriJ2001
Senior Member
Or you can use magisk hide and patch with hide like in this photo
Next check safetynet and finally delete data of play store and check if now the device is certified
Last edited by a moderator:
As far as I know, the Play Protect "device is not certified" message isn't an issue of SafetyNet checks. It's just because Google can't find any result of the compatiily test for the device, so you need to manually register the device on their plateforme.
MauriJ2001
Senior Member
Although you do not believe it, doing those steps I managed to pass the play protect certification since when I finished flashing the rom it came out that it was not certified
Guys. I can't set colors in color calibration in LiveDisplay!
Could anybody confirm if this is a bug!
I can't apply the color calibration for some reason.
Could anybody confirm if this is a bug!
I can't apply the color calibration for some reason.
Yes, it's a bug. I think the apply button is missing in a few location.
I'm pretty much out of the loop, but is there a way to get my banking app working with this rom? Tried setting Selinux to enforcing and hide in magisk but still not working. Rooted just today to try and set Selinux. But if i remove root, selinux switches back to permissive, am i right? Help would be appreciated
Some banking apps doesn't work if they can see the magisk package.
You can hide the Magisk app (it will repack it with a random app package & name) under Settings > Hide the magisk app.
Hi @Ivan_Meler, quick question if I may. Will the selinux status change to enforcing in future updates!?
I always repack magisk. Also done that. I have absolutly no clue, how they do it. Do you know of any other ways? I have no problem with removing root, if my banking app works that way! But without root, i can't set selinux to enforcing...
also @colla_76 yes, i used magisk hide, still not working. And i have no clue how they manage to detect that.
Edit: I ran the app VDInfos to check what could be detected as root, and there were 15 results concerning Test-Keys and something about userdebug
also @colla_76 yes, i used magisk hide, still not working. And i have no clue how they manage to detect that.
Edit: I ran the app VDInfos to check what could be detected as root, and there were 15 results concerning Test-Keys and something about userdebug
Last edited:
Similar threads
- Locked
Top Liked Posts
-
5New builds are up here and via ota
- Fixed issues with keystore present in a lot of bank/secure apps like binance
- Fixed issue where setupwizard would crash when adding fingerprint due to bug in keystore
- Cleaned up patches required for build and removed unneeded ones
- Synced with LineageOS source
This was one of hardest things to track down and it prevented some security related apps from working, big thanks to everyone who supported this project and got me coffee (This took over a month on and off time to debug and figure out, one of weirdest error caused by googles keystore changes in android 12) and thanks to those who helped cover the build server cost
Enjoy new build and stay safe -
15Since my birthday is tomorrow I decided to release a little surprise build. Here is a brief changelog:
- Updated libexynosdisplay from BSP to comply with some android 12 changes
- Removed unused build.prop entries
- Fixed few selinux denials related to hwc props
- Improved UI performance and stability
- Cleaned up source
- Removed more unneeded patches for device support
- Synced with LineageOS source
Im aware of Seedvault issue curently present and im working on a fix for it.
I wanted to release something as a gift from me to everyone using this rom and supporting this project throughout the years. Keeping older phones alive and up to date is really fun hobby and I don't think I would've kept doing it if it wasnt for all of the support from the comunity.
Once again big thanks to everyone who helped cover the build serve cost and coffee.
Enjoy new build and stay safe9And here we go as prommised, new build with improved in call audio quality and June security update
- Merged June 2022. security update
- Merged June 2022. pixel feature drop (SQ3A.220605.009.A1)
- Improved in-call audio quality drastically
- Addressed few more selinux denials
- Improved general stability and performance
- Cleaned up source
- Synced with LineageOS source
Once again huge thanks to everyone who supported this project, helped cover the build server cost and got me a coffee, this project wouldnt be possible without support of the comunity and s7 wouldnt still be running latest OS with latest security updates over 6 years after launch
18.1 and 17.1 builds will be out over the coming days
Enjoy new build and stay safe6New update will fix in call audio quality
there was a weird bug in audio hal that was causing it.
Big thanks to @Bujiraso for playing with props and audio configs which at the end lead me to finding bug in audio hal.
Now im only waiting for google to push June security update source so I can start compiling builds and release them5New builds are up here and via ota
- Fixed issues with keystore present in a lot of bank/secure apps like binance
- Fixed issue where setupwizard would crash when adding fingerprint due to bug in keystore
- Cleaned up patches required for build and removed unneeded ones
- Synced with LineageOS source
This was one of hardest things to track down and it prevented some security related apps from working, big thanks to everyone who supported this project and got me coffee (This took over a month on and off time to debug and figure out, one of weirdest error caused by googles keystore changes in android 12) and thanks to those who helped cover the build server cost
Enjoy new build and stay safe3
well there is no volte so its expected for data to switch from 4g to 3g or even 2g in call, if it didnt happen you would have no ability to make/recieve voice calls at all -
42
LineageOS 19.1 for hero2lte
Code:/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. */
Working:
- Wifi
- Sound
- mali drivers
- USB tethering
- HW Backed video Playback
- Ril (Mobile data,calls, sms and stuff)
- Sensors
- Buttons
- Bluetooth
- Wifi HotSpot
- MTP
- 2D and 3D gpu acceleration
- HW encoding/decoding
- HWcomposer (HWC)
- Charging with device powered off
- Stuff I didn't test yet
- Camera
- GPS
- Fingerprint Sensor
- Mobicore
- SW codecs
Not Working
-
Keep in mind that some LineageOS features have not been completed yet this is not a device bug and please do not report those
in this rom thread, also do not post bug reports for known issues or bug reports without proper
a) Logcat
b) proc/last_kmsg (or proc/kmsg)
c) data/tombstones
d) dmesg
Install gapps right after installing the rom itself don't try to boot to system before that if you want to use gapps (Or wipe data before installing them)
Make sure gapps you decide to use support android 12L/12.1/Are targetting api level 32
Also make sure you are using latest official TWRP before installing rom older versions do not have proper android 12 support
If you want to use Magisk use latest Magisk Beta (25.0) or Magisk 24.1, there is bug in 24.3 that was fixed after its release that prevents zygisk from working on some devices with 3.18 kernel
Downloads:
Google Drive
Mega.nz
GitHub Releases
MD5: 76ebe060c685faa52e02778293e0e31f
if you want to support the project feel free to buy me some coffee paypal.me/ivanmeler
BTC: bc1qqan6m5tn284g38tu52nalc9x5z4all8z5geq6y
ETH(erc20): 0xB737100035a989fA9EaD13B81af2a32EFe6E1C0f
Donations help cover the build server cost and since I do this in my free time, and also cover the coffee for time spent debugging stuff
Feel free to join telegram group with early builds progress updates and some off topic stuff Join
Based On Android 12L/S
Changelog
XDA:DevDB Information
LineageOS 19.0 for S7, ROM for the Samsung Galaxy S7
Contributors
Ivan_Meler
Source Code: https://github.com/8890q/android_kernel_samsung_universal8890/tree/lineage-19.0
ROM OS Version: Android 12L
ROM Kernel: Linux 3.18.x
Version Information
Status: Stable21Well here are some progress update of whats happening behind the scenes.
Ive given 4.4 kernel from 8895 another go and got even further in porting it to 8890 devices this time around.
Mali drivers are ported so is decon (display and graphics stack is up)
I also managed to port audio drivers, buttons and their backlight.
UFS storage drivers were somewhat pain but i got them to work too
and there is tons of small stuff like fp sensor,thermal driver and misc
Tho im not sure it makes too much sense to do this as 4.4 kernel is eol too at least it has full bpf support which i got working on 8895 devices
Other than that there is not too much going on right now, There are few selinux policies that will have to be dealt with and im still dealing with audio config
tho i could only notice echo and not robotic voice some people noticed so that leads me to believe it could be related to weird modem missmatches
I might release another quick build this month with few audio related improvements
No etas as i do this in my free time, And as always thanks to everyone who supported this project so fat as thanks to them this project and device are still alive on latest android version even 6 years after its release (fun fact s7 series was announced on 21. feb. 2016.) so this is somewhat of a s7 birthday update on progress17After a long wait, here it is, Surprisingly smooth android 12 on s7
check out screenshots here Big thanks to everyone who supported this project so far as they helped cover the build server cost and got me coffee for hours spent debbuging weird issues
enjoy android 12 and stay safe17Well here we go first build of the year, andquite a big one while at it
Here is a brief changelogbut there are a lot more changes you will discover in this build
- Removed duplicate props in vendor and system
- Cleaned up device tree code
- Switched to source built camera provider lib
- Switched to few source built ril related libs
- Addressed more selinux denials
- Fixed volume panel location settings
- Added button backlight
- Added Advanced Reboot
- Added LiveDisplay entry into settings
- Added system side toggle for navigation bar
- Merged January 2022 Security Update
- Merged most of previously missing LineageOS features
- Misc performance and stability improvements
- Synced with LOS source
Updates for Android 11 and 10 should be out next week
About camera, As some of you might be aware camera tends to crash afterprolongued use, Im investigatinga fix for it but due to nature of issue itself it might take time
to figure this out completely and what the best way to deal with it is.
Andfinally huge thanks toeveryonewho supported this and other projects of mine so far as they help me cover the build server cost and get me a coffee with their donations, 2022 marks 5 years since release of s7 and im glad i can help in keeping them alive on latest android version with latest security updates
Hope you all had great holidays, Enjoy new build and stay safe in 202216And here it is build with camera properly fixed
- Fixed issue where camera would stop working after prolonged use
- Misc performance and stability improvements
- Merged some more lineageos features that have been posted to gerrit
- Synced with LOS source
keep in mind February security update has not been merged yet and should be in a few days so ill post new build once security update is ready
This really took a long time to fix properly (almost 2 years i would say) especially without disabling fdsan system wide
This fix will be ported over to 17.1 and 18.1 builds too but before i release them ill hold on till february security update is out
Next thing on my todo list is to somewhat mitigate echo in calls some users are experiencing
Once again big thanks to everyone who supported this project and helped cover the build server cost and got me coffee
Enjoy new build and stay safe
