Thank you very much for the tip. Actually, I didn't want to use gboard.
But can you tell me why swiping works in 18.1 and not in this 19.0?
Anithing "structural"?
LineageOS 19.1 (Android 12L) [Signature Spoofing][OTA updates] for S7 Exynos
- Thread starter Ivan_Meler
- Start date
But can you tell me why swiping works in 18.1 and not in this 19.0?
Anithing "structural"?
No. I know Gboard. It's a good piece of software... If there isn't another good choice, I'll go for it.
Thank you very much.
Robotic voice was introduced in the latest release, it was not there earlier. Maybe @Ivan_Meler can fix it in next release?
AOD is perhaps too bright and too bold font for the clock. Sucks that you can't adjust it. This probably is LineageOS feature. But still I'm very happy with the battery life, I typically have 40-50% left at evening.
Using LightROM actually saved quite a bit more battery compared to LOS, which is pretty nice; though that ROM hasnt had updates in like 3 years
If you use Magisk ..... there is the mod: ACC Advanced Charging Controller which does a lot of work for you and helps saving your battery and even battery life.
What does it do exactly? Because LightROM had current control in the kernel options when I use MTweaks, plus stock and LightROM both have option to disable fast charging
¯\_( ͡❛ ͜ʖ ͡❛)_/¯
in my humble opinion
too many words have been spent on personal small problems and settings,
too little has been sought for solutions that one can often find oneself, and
too little has been contributed to the positive critique in relation to this fantastic interesting Rom.
¯\_( ͡❛ ͜ʖ ͡❛)_/¯
in my humble opinion
too many words have been spent on personal small problems and settings,
too little has been sought for solutions that one can often find oneself, and
too little has been contributed to the positive critique in relation to this fantastic interesting Rom.
¯\_( ͡❛ ͜ʖ ͡❛)_/¯
¯\_( ͡❛ ͜ʖ ͡❛)_/¯
in my humble opinion
too many words have been spent on personal small problems and settings,
too little has been sought for solutions that one can often find oneself, and
too little has been contributed to the positive critique in relation to this fantastic interesting Rom.
¯\_( ͡❛ ͜ʖ ͡❛)_/¯
Here is small end of the month update
- Added back lineageos setup wizard present on clean installs
- Merged some of previously missing features that have been ported over to LineageOS 19
- Performance and stability improvements
- Synced with LOS source
Most of the changes in this build are under the hood
For those adventurous that want to compile rom by themselves there is local manifest at https://github.com/ivanmeler/local_manifests/tree/hero_android12
together with 2 commits required for a12 in readme
Big thanks to everyone who supported this project and helped cover the build server cost and also for those who got me coffee,
Also big thanks to everyone for wishes of fast recovery, Im completely fine after covid and builds will continue as usual
Enjoy new builds and stay safe
- Added back lineageos setup wizard present on clean installs
- Merged some of previously missing features that have been ported over to LineageOS 19
- Performance and stability improvements
- Synced with LOS source
Most of the changes in this build are under the hood
For those adventurous that want to compile rom by themselves there is local manifest at https://github.com/ivanmeler/local_manifests/tree/hero_android12
together with 2 commits required for a12 in readme
Big thanks to everyone who supported this project and helped cover the build server cost and also for those who got me coffee,
Also big thanks to everyone for wishes of fast recovery, Im completely fine after covid and builds will continue as usual
Enjoy new builds and stay safe
@Ivan_Meler
Did you have a chance to have a look at my earlier message here? https://forum.xda-developers.com/t/...g-for-s7-exynos.4368995/page-16#post-86306995
Thanks in advance
Did you have a chance to have a look at my earlier message here? https://forum.xda-developers.com/t/...g-for-s7-exynos.4368995/page-16#post-86306995
Thanks in advance
well i end up taking previous version as base source so latest version usually have same fixes, Currently 18.1 and 19 get most updates and 17.1 gets some fixes that i find worth backporting
It seems that Ivan hass less time for your questions than you have to formulate them.
So, you have also time enough to find your own answer. ¯\_( ͡❛ ͜ʖ ͡❛)_/¯
Similar threads
Top Liked Posts
-
1
Thank you for trying to help.
I found in this thread that 20220118 build already has this issue.
I am looking for previous 20220106 build to test. Between that two builds three S7 owners was complaining about random echo, but not "robotic voice". With latest builds I have "robotic voice" in cellular calls for both side plus constant echo for remote side. Messengers calls have constant echo on remote side, but clear voice on both.
May be somebody else still have build from 20220106 in download folder?
Upd: 20200118=>20220118, 20200107=>20220106 -
20New builds are up mainly to bring them inline with official lineageos 19.1 builds when it comes to features, here is a brief changelog
- Removed libbfqio dependency from hwc since it was dropped from lineageos 19.1
- Misc performance and stability improvements
- Synced with LineageOS source (same base as official builds + some extras)
Big thanks to everyone who supported this project so far and helped me cover the build server cost with donations and also got me coffee
Enjoy new builds and stay safe16Here we go new build is up and here is the changelog (I also "fixed" mess google made with phone services notification which was affecting a lot of devices and wasnt device or rom specific)
- Switched to new libperfmgr power hal which can be configured from /system/vendor/etc/powerhints.json
- Adapted DT2W to new power hal
- Muted phone services gps notif (Thanks google really appreciate you breaking random things for everyone)
- Improved battery life and performance
- Cleaned up all of leftover patches that were used by legacy power hal
- Synced with LineageOS source
This update has new power hal which took quite a long time to get working properly
It also outperforms old one and battery life is also better with it since it handles power management way better
Huge thanks to everyone who supported this project and got me coffee while working on this thing
Also huge thanks to everyone who donated and helped me cover the build server cost as they are the reason this project is still alive
Enjoy new build and stay safe15Here it is May security update with few changes related to device too
- Improved battery usage logging for display
- Added QR code reader to camera app (Long hold icon and launch it from context menu)
- Misc performance and stability improvements
- Merged May 2022. security update
- Synced with LineageOS source
I also continued work and testing of new power hal ive been working on for past month or so, Hopefully ill release build with it in a few days (If time allows me as i do this in my free time as a hobby)
Power hal seems to perform better and manage battery life and performance way better than curent one but i would like to test it further before releasing it
As always huge thanks to everyone who supported this project and helped me cover the build server cost which is one of reason why this project is still alive keeping s7 up to date with software, New power hal will improve things even further so i cant wait to release next build with it
18.1 and 17.1 builds will be out in a few days too
Enjoy new build and stay safe15New build is up with few new changes
- Added QR code reader quick settings toggle
- Improved device performance and stability
- Added Custom low power mode power profile for cpu
- Improved A-GNSS (A-GPS) Lock speed
- Exposed device hw revision to settings
- Improved fast/slow charger detection
- Synced with LineageOS source
As always big thanks to everyone who supported this project so far as their donations help cover the build server cost and get me coffee which keeps me up while working on this project.
Expect builds with even more improvements in near future as im testing some exciting changes right now.
Enjoy new build and stay safe4
How did you manage to install 11 gapps on Android 12? That is your issue -
59
LineageOS 19.1 for herolte
Code:/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. */
Working:
- Wifi
- Sound
- mali drivers
- USB tethering
- HW Backed video Playback
- Ril (Mobile data,calls, sms and stuff)
- Sensors
- Buttons
- Bluetooth
- Wifi HotSpot
- MTP
- 2D and 3D gpu acceleration
- HW encoding/decoding
- HWcomposer (HWC)
- Charging with device powered off
- Stuff I didn't test yet
- Camera
- GPS
- Fingerprint Sensor
- Mobicore
- SW codecs
Not Working
-
Keep in mind that some LineageOS features have not been completed yet this is not a device bug and please do not report those
in this rom thread, also do not post bug reports for known issues or bug reports without proper
a) Logcat
b) proc/last_kmsg (or proc/kmsg)
c) data/tombstones
d) dmesg
Install gapps right after installing the rom itself don't try to boot to system before that if you want to use gapps (Or wipe data before installing them)
Since most gapps didnt update for 12L yet (SDK bumped from 31 to 32) i edited falmegapps and uploaded them here use them if you cant find gapps that work on 12L https://mega.nz/folder/FFoS1IIK#XunGRNTViQY7-OZ8oQr0sg
Make sure gapps you decide to use support android 12L/12.1/Are targetting api level 3212L/aka 12.1
Make sure you are using latest official TWRP before installing rom older versions do not have proper android 12 support
Downloads:
Google Drive
Mega.nz
GitHub Releases
MD5: af38c7aab230c53c90faa6b04ef3960a
if you want to support the project feel free to buy me some coffee paypal.me/ivanmeler
BTC: bc1qqan6m5tn284g38tu52nalc9x5z4all8z5geq6y
ETH(erc20): 0xB737100035a989fA9EaD13B81af2a32EFe6E1C0f
Donations help cover the build server cost and since I do this in my free time, and also cover the coffee for time spent debugging stuff
Feel free to join telegram group with early builds progress updates and some off topic stuff Join
Based On Android 12L/S
Changelog
XDA:DevDB Information
LineageOS 19.0 for S7, ROM for the Samsung Galaxy S7
Contributors
Ivan_Meler
Source Code: https://github.com/8890q/android_kernel_samsung_universal8890/tree/lineage-19.0
ROM OS Version: Android 12L
ROM Kernel: Linux 3.18.x
Version Information
Status: Stable20New builds are up mainly to bring them inline with official lineageos 19.1 builds when it comes to features, here is a brief changelog
- Removed libbfqio dependency from hwc since it was dropped from lineageos 19.1
- Misc performance and stability improvements
- Synced with LineageOS source (same base as official builds + some extras)
Big thanks to everyone who supported this project so far and helped me cover the build server cost with donations and also got me coffee
Enjoy new builds and stay safe19And here it is build with camera properly fixed
- Fixed issue where camera would stop working after prolonged use
- Misc performance and stability improvements
- Merged some more lineageos features that have been posted to gerrit
- Synced with LOS source
keep in mind February security update has not been merged yet and should be in a few days so ill post new build once security update is ready
This really took a long time to fix properly (almost 2 years i would say) especially without disabling fdsan system wide
This fix will be ported over to 17.1 and 18.1 builds too but before i release them ill hold on till february security update is out
Next thing on my todo list is to somewhat mitigate echo in calls some users are experiencing
Once again big thanks to everyone who supported this project and helped cover the build server cost and got me coffee
Enjoy new build and stay safe19Well here we go first build of the year, andquite a big one while at it
Here is a brief changelogbut there are a lot more changes you will discover in this build
- Removed duplicate props in vendor and system
- Cleaned up device tree code
- Switched to source built camera provider lib
- Switched to few source built ril related libs
- Addressed more selinux denials
- Fixed volume panel location settings
- Added button backlight
- Added Advanced Reboot
- Added LiveDisplay entry into settings
- Added system side toggle for navigation bar
- Merged January 2022 Security Update
- Merged most of previously missing LineageOS features
- Misc performance and stability improvements
- Synced with LOS source
Updates for Android 11 and 10 should be out next week
About camera, As some of you might be aware camera tends to crash afterprolongued use, Im investigatinga fix for it but due to nature of issue itself it might take time
to figure this out completely and what the best way to deal with it is.
Andfinally huge thanks toeveryonewho supported this and other projects of mine so far as they help me cover the build server cost and get me a coffee with their donations, 2022 marks 5 years since release of s7 and im glad i can help in keeping them alive on latest android version with latest security updates
Hope you all had great holidays, Enjoy new build and stay safe in 202218Well here are some progress update of whats happening behind the scenes.
Ive given 4.4 kernel from 8895 another go and got even further in porting it to 8890 devices this time around.
Mali drivers are ported so is decon (display and graphics stack is up)
I also managed to port audio drivers, buttons and their backlight.
UFS storage drivers were somewhat pain but i got them to work too
and there is tons of small stuff like fp sensor,thermal driver and misc
Tho im not sure it makes too much sense to do this as 4.4 kernel is eol too at least it has full bpf support which i got working on 8895 devices
Other than that there is not too much going on right now, There are few selinux policies that will have to be dealt with and im still dealing with audio config
tho i could only notice echo and not robotic voice some people noticed so that leads me to believe it could be related to weird modem missmatches
I might release another quick build this month with few audio related improvements
No etas as i do this in my free time, And as always thanks to everyone who supported this project so fat as thanks to them this project and device are still alive on latest android version even 6 years after its release (fun fact s7 series was announced on 21. feb. 2016.) so this is somewhat of a s7 birthday update on progress
