Yeah, NFC is working. Tested with several cards. (I initially tested it on a busted card)
LineageOS 19.1 (Android 12L) [Signature Spoofing][OTA updates] for S8/S8+/Note8
- Thread starter Ivan_Meler
- Start date
Hello @Ivan_Meler,
I saw that for your Lineageos 18.1 build you had the improvement :
-Switched to Note10+ RIL stack (Mostly stability and battery life improvements, also a lot cleaner)
Do we have it also for this Lineageos 19 ?
Thx.
I saw that for your Lineageos 18.1 build you had the improvement :
-Switched to Note10+ RIL stack (Mostly stability and battery life improvements, also a lot cleaner)
Do we have it also for this Lineageos 19 ?
Thx.
yep basically everything that was done device side when it comes to fixes and improvements is also included in los 19 but system side features are likely not there yet so no stuff like advanced rotation control etc that was there in 18.1
i didnt
i flashed dreamlte version of LOS 19 ROM then dreamlte version of TWRP 3.6 and it booted
then after a while i flashed dreamlte version of LOS 16 from TWRP backup and i could not boot into the ROM
and then i could not boot into TWRP
i flashed dreamlte TWRP 3.2 and it still wouldnt boot into TWRP
i flashed dreamlte orangefox and it still wouldnt boot into orangefox
then i flashed dreamlte twrp 3.1.1-2 and it booted
but when i tried to manually install dreamlte version of LOS 16 but it said it requires dreamlte and my device is .
so i tried restoring TWRP 3.6 and LOS 19 and it still wouldnt boot into either
so i tried flashing my original stock S8 ROM TWRP backup and it booted
then i flashed dreamlte TWRP 3.2 and it booted
then i flashed dreamlte orangefox and it booted
then i flashed dreamlte version of LOS 16 and worked and it booted
then i flashed dreamlte version of LOS 16 from TWRP backup and it booted
Last edited:
Idk whats wrong with your phone, i'm using lineage 19 without any problems and everything is smooth
booting into LOS 19 works find, it is just when i change ROMS that it breaks
maybe TWRP 3.6 does not like non A-12 roms?
(doesnt make sense as even if i restore LOS 19 and TWRP 3.6 from backup it still didnt boot into either)
Last edited:
i did
im just saying it MIGHT be twrp 3.6 that caused it somehow
or it might be android 12 that caused it somehow
i dont know
Because i need for ID download, the goverment app requires thathave not tried, but it works on LOS 16
I tested my gps with GPS Locker but i view only 1 signal. I post the screenshot. Someone can help me please ? I live in France if it can help. @Ivan_Meler, you know this problem maybe ? Thanks a lot in advance
? I live in France if it can help. @Ivan_Meler, you know this problem maybe ? Thanks a lot in advanceAttachments
if you arent, try going outside. gps needs proper view of the sky for first lockI tested my gps with GPS Locker but i view only 1 signal. I post the screenshot. Someone can help me please
You are a genius. I'm outside now and it works. Thanks so much.
Your rom is amazingAttachments
I have this same issue right now, G950N . Phone is stuck at recovery logo... I dont know what to do
does flashing twrp 3.1.1-2 work? it worked for me, otherwise you will need to flash stock firmware via odin
if twrp 3.1.1-2 boots into recovery, then BACK UP all data (adb pull /sdcard) in case you get stuck again or cannot recover and need to flash stock firmware
also try as many TWRP's as you can (from official TWRP website), one of them may work like https://dl.twrp.me/dreamlte/twrp-3.1.1-2-dreamlte.img.html worked for me
I didn't try netflix but google chrome and kiwi browser freeze. Mario Kart Tour back to interface. I don't know what happen but maybe we must send logcat to check all these applications
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
17Here we go new build is out and so is source for the rom
- Adapted DT2W support (double tap to wake)
- Muted phone services gps notif (Thanks google really appreciate you breaking random things for everyone)
- Improved battery life and performance
- Fixed issue where some devices would not wake up touch after being in sleep mode
- Cleaned up all of leftover patches that were used by legacy power hal
- Synced with LineageOS source
- Released source on https://github.com/8890q/
Keep in mind there is https://github.com/8890q/patches repo with some changes needed for 8895 support
I decided to release source as builds have reached stability, so why not give something to comunity to play with
(And my birthday is coming up in 2 weeks so i wanted to give comunity a gift from me to all of you)
Please give proper credits when you use the source as I spent quite a lot of my free time on this project and consider donating to help keep the project alive
Big thanks to everyone who supported this project and helped cover the build server cost and got me coffee, This really wouldnt be possible without them
Enjoy new build and stay safe16New build is up, I implemented glove mode/high touch sensitivity as per request of some users and synced with lineageos source
Next builds will have with more improvements like dolby support and few other changes so stay tuned.
Big thanks to everyone who supported this project,Donations really help cover build server cost and get me a coffee for timr spent working on this project
Enjoy new build and stay safe14Here is another build, with quite a few changes
- Added WireGuard kernel implementation
- Added QR code reader quick settings toggle
- Improved device performance and stability
- Improved A-GNSS (A-GPS) Lock speed
- Exposed device hw revision to settings
- Improved fast/slow charger detection
- Improved double tap to wake detection on some devices
- Remaped bixby to menu so long hold, short hold and wake actions work
- Long hold on bixby is now handling multitasking
- Improved bluetooth stability
- Synced with LineageOS source
Im curently working on getting hwc to work whih takes a bit of time especially to debug on s8 with broken screen but im making some progress.
Big thanks to everyone who donated and helped cover the build server cost and got me coffee
Enjoy new build and stay safe14Here it is another security update that also comes with quite a lot of device specific improvements
- Improved bluetooth in call audio sample rate handling
- Added FB notifier callbacks to kernel
- Added always on display support
- Switched to new power hal with custom fine tuned power profile
- Improved battery usage logging for display
- Added QR code reader to camera app (Long hold icon and launch it from context menu)
- Disabled unneeded debugging in kernel that was slowing things down
- A lot of performance stability and battery life improvements
- Cleaned up device tree
- Merged May 2022. Security update
- Synced with LineageOS source
This build took quite a lot of work and testing and should improve overall usability of devices even more
As always big thanks to everyone who supported this porject and helped me cover the build server cost with donations and got me coffee (This update sure took quite a lot of coffee and my free time to get finished haha)
18.1 update will be out in a few days
Enjoy new build and stay safe5Updated build for S8+ is up, once again sorry for inconvenience, Looks like one thing that differentiates s8 n8 and s8+ is s8+ lacks support for glove mode exposed in standard way so glove mode hal introduced issues
27.04.2022.
- Removed High touch sensitivity (glove mode) support from S8+ as it lacks support for it
Once again thanks to everyone who supported this project and enjoy new build -
70
LineageOS 19.1 for Exynos 8895 devices
Code:/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. */
Working:
- Wifi
- Sound
- mali drivers
- USB tethering
- HW Backed video Playback
- Ril (Mobile data,calls, sms and stuff)
- Sensors
- Buttons
- Bluetooth
- Wifi HotSpot
- MTP
- 2D and 3D gpu acceleration
- HW encoding/decoding
- Charging with device powered off
- Stuff I didn't test yet
- Camera
- GPS
- Fingerprint Sensor
- Mobicore
- SW codecs
Not Working
-
Keep in mind that some LineageOS features have not been completed yet this is not a device bug and please do not report those
in this rom thread, also do not post bug reports for known issues or bug reports without proper
a) Logcat
b) proc/last_kmsg (or proc/kmsg)
c) data/tombstones
d) dmesg
Install gapps right after installing the rom itself don't try to boot to system before that if you want to use gapps (Or wipe data before installing them)
Since most gapps didnt update for 12L yet (SDK bumped from 31 to 32) i edited falmegapps and uploaded them here use them if you cant find gapps that work on 12L https://mega.nz/folder/FFoS1IIK#XunGRNTViQY7-OZ8oQr0sg
Make sure gapps you decide to use support android 12L/12.1/Are targetting api level 32
Make sure you are using latest official TWRP before installing rom older versions do not have proper android 12 support
Downloads:
Google Drive
Mega.nz
GitHub releases
if you want to support the project feel free to buy me some coffee paypal.me/ivanmeler
BTC: bc1qqan6m5tn284g38tu52nalc9x5z4all8z5geq6y
ETH(erc20): 0xB737100035a989fA9EaD13B81af2a32EFe6E1C0f
Donations help cover the build server cost and since I do this in my free time, and also cover the coffee for time spent debugging stuff
Feel free to join telegram group with early builds progress updates and some off topic stuff Join
Based On Android 12/S
Changelog
Contributors
Ivan_Meler
Source Code: https://github.com/8890q/
ROM OS Version: Android 12
ROM Kernel: Linux 4.4.x31As prommised here it is Android 12, Big thanks to everyone who supported project with donations that helped cover the build server cost and get me coffee
If you want to turn off auto live display (Yellow tint) type "Live" in settings search and go to LiveDisplay27Well here is a little surprise build I've spent my week off working on
Here is a brief changelog
- Switched to new audio hal that supports interface v5
- Fixed usb audio
- Fixed audio in screen recoidng recording and wireless display sharing
- Improved bluetooth audio stability and compatibility
- Started rewriting sepolicy
- Updated wifi firmware
- Merged latest available kernel source from samsung(G955FXXUCDUD1/G950FXXUCDUD1/N950FXXSGDUG7)
- Merged latest blobs available from samsung(G955FXXUCDUD1/G950FXXUCDUD1/N950FXXSGDUG7)
- Implemented fast charging toggle in battery settings
- Removed unneeded libmemset shim
- Added support for user configurable wireless charging sound
- Added switch to disable vibration on fp unlock
- Removed non-functional srgb toggle from dev options
- Removed liboemcrypto.so to fix L3 drm playback
- updated LPM binaries
- Cleaned up device tree and kernel repo
- A lot of under the hood performacne and stability improvements
- Synced with LineageOS source
There are a lot more changes that went into this build as i did complete rebase of most of the source.
I plan to release full source in near future so people can compile other roms if they feel like it
This update actually had most changes go into it since initial builds and i had to spend my off days to get it sorted haha but i think end result is worth it
As always huge thanks to everyone who donated to help cover the build server cost and got me coffee (This update sure made me drink a lot of it haha)
Enjoy new builds and stay safe.21Progress update for March 2022.
- Cleaned up patches needed for build
- Removed AudioFX which was causing issues
- Decreased microphone gain a bit to mitigate in-call issues
- Performance improvements
- Updated some device control apps like advanced display settings
- Improved vibrator intensity in new hal
- Imrpoved fp sensor response time
- A lot of 'under the hood' changes
- Merged more previously missing los features
- Implemented OTA updates
Builds will be out once March security update source is merged in los, this is quite a large update as it will also come with march 2022 pixel feature drop
Otas will also come to 18.1 builds, they will make updates easier but as always checking a thread is recommanded for changelogs and progress updates.
Lastly as always thanks to everyone who supported this project and made it possible by covering the build server cost and coffee20And here we go april builds are up, here is a brief changelog
- Merged April 2022. Security update
- Enabled new LineageOS icons (you might have to clear launcher cache for them to show up)
- Fixed issue where galery app would show black text on black background
- Fixed issue where unlock sound would sometimes play twice
- Misc performance and stability improvements
- Synced with LineageOS source
As always big thanks to everyone who supported this project and helped me cover the build server cost and got me coffee
There will be few other builds this months as im working on hwc and working on a new aidl power hal that will improve performance and battery life
18.1 builds will be out in a few dyas
Enjoy new builds and stay safe
