LineageOS 19.1 [S] [12.1] (Unofficial) Mi Pad 4 Plus (clover+)

Search This thread

MadsBen

Senior Member
Aug 15, 2010
103
21
Was running "lineage-18.1-20211102-UNOFFICIAL-clover-eas.zip" on clover+.
Tried to dirty flash "lineage-19.0-20211231-UNOFFICIAL-clover+-4.19.zip", but had all kinds of problems. Boot loops, lag, apps kept crashing.

Did a clean install of "lineage-19.0-20211230-UNOFFICIAL-clover+.zip" with latest nikgapps from 20211227. Everything seems to be running smooth. Only problem is the CTS profile match fail.
 

sabar_op

Senior Member
Jun 30, 2010
399
807
Xiaomi Mi Pad 4 Plus
Was running "lineage-18.1-20211102-UNOFFICIAL-clover-eas.zip" on clover+.
Tried to dirty flash "lineage-19.0-20211231-UNOFFICIAL-clover+-4.19.zip", but had all kinds of problems. Boot loops, lag, apps kept crashing.

Did a clean install of "lineage-19.0-20211230-UNOFFICIAL-clover+.zip" with latest nikgapps from 20211227. Everything seems to be running smooth. Only problem is the CTS profile match fail.

The clover+-4.19 is using kernel 4.19a major kernel upgrade of clover rom where usually clover use kernel 4.4. It needs clean install as it has differents HALs, blobs, etc compared to kernel 4.4.

Anyway, I will delete 4.19 rom to avoid confusion.
 

gtrizzo

New member
Oct 28, 2011
4
1
Hi,
i tried to make a clean installation with the lastest twrp on Mi Pad 4 Plus but in some cases the device freeze on boot animation and turned off, for restart him i must press power button for more seconds, have you any suggestions ?
Thanks
 
  • Like
Reactions: pippoparecchio

sabar_op

Senior Member
Jun 30, 2010
399
807
Xiaomi Mi Pad 4 Plus
Just a fast message to thank @sabar_op and to notify you that I've tryed the new pixel version on a clover plus device and it is really slow/bloated comparing with the linage of nov (thé one I had before) with a totaly clean installation

I am using it now in my device mi pad plus + lte...and it running smoothly (flash the rom from los19.0 with factory reset only). And ofcourse it bloated with gapps...its pixel...
 
  • Like
Reactions: Crescendo Xenomorph

BranMakMorn

Member
Jul 13, 2013
20
0
Hi,
i tried to make a clean installation with the lastest twrp on Mi Pad 4 Plus but in some cases the device freeze on boot animation and turned off, for restart him i must press power button for more seconds, have you any suggestions ?
Thanks

So the same issue as in 18.1?
Have this from the beginning of a clean installation ´til now.
 

wanfahimi

New member
May 20, 2015
3
1
Tried the Pixel experience with Android 12 from the same folder. That one works fine.
Just to report im using PE on mi pad 4 (8 inch) and works fine. Update android system intelligence app, and so far the experience is good. Except it turn black screen after mi logo when restart. Need to go to twrp, turn it off, and turn on again after a minute or two.
 
I am using it now in my device mi pad plus + lte...and it running smoothly (flash the rom from los19.0 with factory reset only). And ofcourse it bloated with gapps...its pixel...
Hi, I understand what you mean with the pixel part but it was really too slow. Don't know why.
I've rolled back to the last Lin and now is ok.
Thank you anyway for your job. Maybe the next will be fine for mine too 😉.
 
  • Like
Reactions: sabar_op

sabar_op

Senior Member
Jun 30, 2010
399
807
Xiaomi Mi Pad 4 Plus
Just to report im using PE on mi pad 4 (8 inch) and works fine. Update android system intelligence app, and so far the experience is good. Except it turn black screen after mi logo when restart. Need to go to twrp, turn it off, and turn on again after a minute or two.

Yes...that is the issue in new 4.19 kernel both in los19.0 (the rom is not release yet) and pe12...in some case the device will restart after mi boot logo...just leave it (no need to turn off) as it will be boot again normally...
 

jekiDlemot

Member
Apr 10, 2016
36
10
Hi all been using the ROM for sometime and I would say it's stable enough to say stable and the latest update kind of made the ROM what we want to call smooth yet but snappier than before, and I am just wondering if we could make the ROM able to run at higher refresh rate, and also is it some kernel thing? And also appreciate your work @sabar_op
 

Top Liked Posts

  • 1
    Device: Xiaomi MiPad 4 Plus LTE (10")
    Recovery: TWRP 3.3.0
    Firmware (Baseband): 1-00729.1SDM660_GEN_Pack-1.214729.1.215613.1
    Rom: lineage-19.1-20220522-UNOFFICIAL-clover.zip
    Flash: Dirty flash on top of lineage-19.1-20220517-UNOFFICIAL-clover+.zip (No Wipe, No Format)
    GAPPS: MindTheGapps-12.1.0-arm64-20220403_181832.zip
    Google Playstore: 30.5.16-21 [PR] 447062287 (Device is not certified)
    Launcher: Default launcher
    Installation Date: 25 May 2022
    AnTuTu Score: 198924 pt (CPU: 70163, GPU: 34933, MEM: 36333, UX: 57495)

    Improvements:
    removable navigation bar. Charging speed, Battery usage, Cameras, headphone jack (external microphone), OTG, GPS, Wi-Fi, LTE, FP, and BT work nominally.

    Known Issues:
    None
    1
    Which recovery should I use?
    Last official is:
    twrp-3.6.1_9-0-clover.img
    59.5M
    2022-03-07 02:30:01

    👍 PW
  • 6
    New update lineage-19.1-20220517-UNOFFICIAL-clover+.zip. See 1st post.

    Just info, latest lineageos has ability to turn off the taskbar...check in setting -> system -> button -> enable taskbar
    3
    Because most people only update to last official Stable ROM before moving to custom ROMs...

    Many users are unaware both that the last Stable is NOT the latest, and that the last official Developer (weekly) ROM fixes issues that especially affect devices with Pie (9)+:
    - later / compatible baseband,
    - magnetic cover detection,
    - fingerprint sensor (plus),
    - screen rotation,
    - call issues,
    - in app calling,
    - wifi
    ... and other improvements I may have missed...

    This means moving from Stable to Developer firmware is essential for all recent custom ROMs to avoid hardware and other issues.

    Latest Developer ROM (or Firmware only) is
    - MIUI 10.5
    - released 2019.8.29
    - baseband version 660_GEN_PACK-1.214729.1.215613.1

    Latest Stable ROM (or Firmware only) is
    - MIUI 10.3.2
    - released 2019.05.24
    - baseband version 660_GEN_PACK-1.186426.1.191687.1

    😛 PW

    Perhaps I will put latest firmware in the rom...once the rom installed it will flash the firmware as well. What do you think?
    3
    Device: Xiaomi MiPad 4 Plus LTE (10")
    Rom: PixelExperience_Plus_clover-12.1-20220518-1441-UNOFFICIAL.zip
    Flash: Dirty flash on top of lineage-19.1-20220411-UNOFFICIAL-clover+.zip (No Wipe, No Format)
    Gapps: MindTheGapps-12.1.0-arm64-20220403_181832.zip
    Luncher: Default luncher
    Antutu Score: 199080 pt (CPU: 68467, GPU: 34751, MEM: 38493, UX: 57369)

    Improvements:
    Snappier, feel faster, No status bar. Cameras, GPS, Wifi, FP, and BT work nominal.

    Known Issues:
    The microphone is not working. The external microphone also is not working.
    There is some 4G connectivity problem (Maybe it's only my device)

    Mic is working well for me...perhaps you need clean flash...
    2
    @sabar is this a new version or something specific? Or a quick bug fix?
    PixelExperience_Plus_clover-12.1-20220521-1042-UNOFFICIAL.zip

    Major updates of blobs, under testing by other user...but should stable as I use it for lineageos 19.1.
    2
    lineage-19.1-20220517-UNOFFICIAL-clover+.zip - Everything looks good except low microphone sound. Microphone gain needs to be increased in Xiaomi Parts settings which is a hassle. It becomes low again by itself after a while. So every time before using the mic I need to play with Mic Gain bar.

    Also, there’s a bit lag at app opening animations. When you open an app for the first time (if it’s not running in the background), its icon appears weirdly during the animation.

    I know you publish PE for different purposes but on PixelExperience_Plus_clover-12.1-20220521-1042-UNOFFICIAL.zip (and on all latest clover versions) the taskbar icons are cut/only like 60% top of them appears. There’s an obvious sizing problem on Mi Pad 4 Plus 10” version. Are you planning to publish a “+” version as you did in February @sabar_op?

    PixelExperience_clover+-12.0-20220222-0407-UNOFFICIAL.zip is a great rom for Mi Pad 10” version and the only problem is fingerprint sensor doesn’t act like a home button actually.

    I didn't build PE for 10" anymore due issue in fingerprint sensor that act like home button. PE source was disabled for that function.
  • 29
    Latest rom : lineage-19.1-20220517-UNOFFICIAL-clover+.zip, see this link :

    Changelog :
    - Switch back to 4.19 kernel/HALs
    - May Security Patch (android-12.1.0_r5)
    - Fix green screen video recording

    Installation instructions :
    - Perform a backup of your current ROM (optional)
    - Reboot into recovery/twrp, format data, then reboot into recovery/twrp again.
    - Flash ROM.
    - Flash GApps is optional.

    What's not working:
    Let me know.

    Known issues :
    - Disabled Encryption
    - Device is not certified

    Please post the bug along with log (use syslog).

    Source :
    Kernel : clover
    Device tree : sdm660
    12
    Update : latest version lineage-19.0-20211105-UNOFFICIAL-clover-new.zip pass safetynet.
    12
    Hi OP

    You are using Pixel build now. Are you continue to update los 19 ?

    Thanks

    I will continue once the los 19.0 source is released officially.
    11
    Uploading new rom 20211112 (see 1st post for the link) :
    Changelog :
    - Nov security patch
    - SELinux is enforced
    - Upstream update of lineage source
    - Device is certified without magisk
    - Fix battery icon, support monet, etc...
    10
    New update : build date 20211230 (see 1st post for the link), changelog :
    - December security patch
    - Upstream update of lineage source.
    - Kernel update 4.4.296 (thanks to pix106).