LineageOS 20.0 (Android 13) for GT-N8000 GT-N8005 GT-N8010 GT-N8013 GT-N8020 ALPHA

Search This thread

html6405

Recognized Developer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/

Hi,

here you can find my version of LineageOS 20 for our Samsung Galaxy Note 10.1 devices.
At first I want to thank @rINanDO and @ChronoMonochrome for all your work which helped me a lot.

This is a ALPHA build, also on the LineageOS side, so don't install it if you want a complete and stable rom and don't report my already listed bugs!

Here you can see how far everything is working for now.

N8000, N8010, N8013, N8020:
  • Boot
  • Bluetooth
  • Audio
  • Graphics
  • Cameras
  • Sensors
  • GPS
  • Wifi
  • USB
  • Video playback (HW/SW)
  • Tethering via USB, WIFI and Bluetooth
  • consumerir transmitter
  • Stylus with gestures and hovering icon
  • RIL
  • sec_keyboard docking station
  • much more...
  • Random reboots
  • Long screenshot
  • SD-Card can't be formatted as internal storage, this will cause a bootloop
  • Network monitoring because of missing eBPF support
If you don't like it, reboot into recovery and type the following command:
I would recommend to use microG instead of BitGapps,
here you can find the installation instructions:
  1. Download Magisk 24.1 and flash it via TWRP (yes, flash the APK file), reboot
  2. Open Magisk and update the App (and do a reboot if it's asking)
  3. Enable Zygisk in Magisk
  4. Download and install microG installer in the Magisk manager, reboot
  5. Download and install safetynet-fix in the Magisk manager, reboot
  6. Check with a safetynet checker app and you should pass :)

If you plan to use a sim card in your device, I would recommend to disable the pin code before with another device.
In some cases the sim card becomes unusable while typing in the code.

Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.

donate

Wanna improve your sound configs?
Now you can use my app to access all boeffla sound configurations.

XDA:DevDB Information
[ROM][13.x][N8000/N801x/N8020][BETA] LineageOS 20.0, ROM for the Samsung Galaxy Note 10.1

Contributors

html6405
Source Code: https://github.com/html6405

ROM OS Version: 13.x T
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.5.2
Based On: LineageOS
Selinux: permissive, this only makes sense as soon the ROM is stable.

Version Information
Status:
Alpha

Created 2022-11-02
Last Updated 2023-03-06
 
Last edited:

samsum26

Member
Dec 31, 2021
7
6
Thats amazing... will test this this out when you get the ROM uploaded as it seems to be missing at the moment on both the ROM Mega Link and the AndroidFileHost Link. Thanks :)
 
  • Like
Reactions: html6405

samsum26

Member
Dec 31, 2021
7
6
I could install the Rom OK but cannot do the Magisk part as it wants to Update but fails to install from .apk file it downloads and updating the app needs the other update or it says something like it acts as though it is not installed so couldn't do the 3. Enable Zygisk in Magisk (Step). I used MindTheGapps-12.1.0 on the last 19.1 LineageOS so will go back to that for now as I know what I'm doing with that one :D
 

html6405

Recognized Developer
I could install the Rom OK but cannot do the Magisk part as it wants to Update but fails to install from .apk file it downloads and updating the app needs the other update or it says something like it acts as though it is not installed so couldn't do the 3.
Hmm did you do a clean installation?
And did you grant the installation permissions to magisk?

It worked fined on my devices, also v23.0 with magisk hide still works fine!
 
  • Like
Reactions: samsum26

samsum26

Member
Dec 31, 2021
7
6
Hmm did you do a clean installation?
And did you grant the installation permissions to magisk?

It worked fined on my devices, also v23.0 with magisk hide still works fine!
I did do a clean install and installed magisk through TWRP and it did ask later for permissions in the app itself and allowed via the slider and then updated but never got far with the program update. I've not used the magisk before so probably something I did wrong. Will have another play and video it next time to find where I'm going wrong and couldn't find the Enable Zygisk at all in settings or anywhere
 

Alexfs

Senior Member
Oct 7, 2014
155
83
I did do a clean install and installed magisk through TWRP and it did ask later for permissions in the app itself and allowed via the slider and then updated but never got far with the program update. I've not used the magisk before so probably something I did wrong. Will have another play and video it next time to find where I'm going wrong and couldn't find the Enable Zygisk at all in settings or anywhere
Hey
Do not update Magisk, the new version does not work in our kernel. The Developer is working on a kernel update for our devices so that we can use the latest versions of Magisk. Just wait a little longer, I believe this rom will be one of the best created for our tablets.
 
  • Like
Reactions: w_tapper

samsum26

Member
Dec 31, 2021
7
6
Hey
Do not update Magisk, the new version does not work in our kernel. The Developer is working on a kernel update for our devices so that we can use the latest versions of Magisk. Just wait a little longer, I believe this rom will be one of the best created for our tablets.
Thanks Alexfs will hang on a bit as I tried again earlier with same problems and link for Magisk was down at androidfilehost... much appreciated
 

w_tapper

Senior Member
Hey
Do not update Magisk, the new version does not work in our kernel. The Developer is working on a kernel update for our devices so that we can use the latest versions of Magisk. Just wait a little longer, I believe this rom will be one of the best created for our tablets.
I will switch from lineageos 16 to this rom when kernel update is released 👍
 
  • Like
Reactions: Alexfs

html6405

Recognized Developer
Finally fixed the wake up problem in kernel, it took some time to figure out which driver was faulty.
Only for N8000 and N8010 at the moment.

Attention: this is only a test kernel at the moment, if you want to try it, there still could be other issues.
 

Attachments

  • html6405_kernel_-32a196e523a0-p4noterf.zip
    5.9 MB · Views: 369
Last edited:

w_tapper

Senior Member
Finally fixed the wake up problem in kernel, it took some time to figure out which driver was faulty.
Only for N8000 and N8010 at the moment.

Attention: this is only a test kernel at the moment, if you want to try it, there still could be other issues.
kernel says it's not compatible with my gt-n8010
 

Attachments

  • PXL_20221105_200540881.jpg
    PXL_20221105_200540881.jpg
    3.4 MB · Views: 242
Sooo.. Since installing this rom I have no way to access TWRP. Power+Vol+ ends on "Warning!" screen saying that custom rom can cause problems and choice of two options:
- Vol Up - continue (restarts device and boots the OS),
- Vol Down - Cancel (boots to Download mode).
Rebooting to recovery with advanced reboot ands with above as well...

I reflashed TWRP with ODIN, but that changed nothing.
Any idea?


Ok, after 3 or 4 reflashes recovery works.
Now I have a problem with MAGISK. Manager says MAGISK is available, but doesn't give access to root - it acts as there is no root at all...
So MAGISK is there, but at the same time it isn't (attached image - 001251)... Used zip from OP.

Than after reflash, same zip, MAGISK is not available (000432)... Still boot image is MAGISK patched...
 

Attachments

  • 20221107_000432.jpg
    20221107_000432.jpg
    858.7 KB · Views: 150
  • 20221107_001251.jpg
    20221107_001251.jpg
    787.1 KB · Views: 153
Last edited:

w_tapper

Senior Member
Sooo.. Since installing this rom I have no way to access TWRP. Power+Vol+ ends on "Warning!" screen saying that custom rom can cause problems and choice of two options:
- Vol Up - continue (restarts device and boots the OS),
- Vol Down - Cancel (boots to Download mode).
Rebooting to recovery with advanced reboot ands with above as well...

I reflashed TWRP with ODIN, but that changed nothing.
Any idea?


Ok, after 3 or 4 reflashes recovery works.
Now I have a problem with MAGISK. Manager says MAGISK is available, but doesn't give access to root - it acts as there is no root at all...
So MAGISK is there, but at the same time it isn't (attached image - 001251)... Used zip from OP.

Than after reflash, same zip, MAGISK is not available (000432)... Still boot image is MAGISK patched...
had that same issue with 25.2 on old kernel - flash magisk 24.1
 

Top Liked Posts

  • There are no posts matching your filters.
  • 5
    Update 06.03.2023:
    • Synced with LineageOS sources from February
    2
    Update 06.03.2023:
    • Synced with LineageOS sources from February
    Hello my friend, it's good to know that you haven't abandoned us, it's been a long time without you speaking here on the forum, I hope all is well with you.
    Any updates from you?
    Is there any improvement?
    1
    Hello my friend, it's good to know that you haven't abandoned us, it's been a long time without you speaking here on the forum, I hope all is well with you.
    Any updates from you?
    Is there any improvement?
    I've tried to fix:

    Code:
    03-09 16:34:18.385  1415  1415 F DEBUG   :       #00 pc 000059f4  /vendor/lib/hw/gralloc.exynos4.so (gralloc_perform(gralloc_module_t const*, int, ...)+192) (BuildId: 9103597dfaf8e3bcbd30e2affc18327b)
    03-09 16:34:18.385  1415  1415 F DEBUG   :       #01 pc 00008991  /vendor/lib/hw/gralloc.exynos4.so (android::hardware::Gralloc1On0Adapter::retain(native_handle const*)+336) (BuildId: 9103597dfaf8e3bcbd30e2affc18327b)

    But I had no time to test enough to see if it's fixed now.

    Everything is fine, I just have to work 8 - 12 hours per day and I'm struggling to find some time for android, but I try find one day per week.
    I installed the LineageOS 20 rom and MicroG in my GT-N8000 and everything works well. I like the Aurora Store but just out of curiosity, is it possible to install the Google Play Store as well?.
    Yes, the patched PlayStore still should work with microG (but untested by myself) and I'm using NikGapps on one of my devices without any problem.
    Would it be possible for you to provide a .zip to resize the system partition so we can install gapps on this rom?
    That's a good idea, I will add it to the list.
    Newer packages need to much space, I'm using an older and smaller one (NikGapps).
    Can't seem to set a wallpaper
    Hmm just tested it, it seems to work fine here, whats exactly happening?
  • 21
    Code:
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    *
    */

    Hi,

    here you can find my version of LineageOS 20 for our Samsung Galaxy Note 10.1 devices.
    At first I want to thank @rINanDO and @ChronoMonochrome for all your work which helped me a lot.

    This is a ALPHA build, also on the LineageOS side, so don't install it if you want a complete and stable rom and don't report my already listed bugs!

    Here you can see how far everything is working for now.

    N8000, N8010, N8013, N8020:
    • Boot
    • Bluetooth
    • Audio
    • Graphics
    • Cameras
    • Sensors
    • GPS
    • Wifi
    • USB
    • Video playback (HW/SW)
    • Tethering via USB, WIFI and Bluetooth
    • consumerir transmitter
    • Stylus with gestures and hovering icon
    • RIL
    • sec_keyboard docking station
    • much more...
    • Random reboots
    • Long screenshot
    • SD-Card can't be formatted as internal storage, this will cause a bootloop
    • Network monitoring because of missing eBPF support
    If you don't like it, reboot into recovery and type the following command:
    I would recommend to use microG instead of BitGapps,
    here you can find the installation instructions:
    1. Download Magisk 24.1 and flash it via TWRP (yes, flash the APK file), reboot
    2. Open Magisk and update the App (and do a reboot if it's asking)
    3. Enable Zygisk in Magisk
    4. Download and install microG installer in the Magisk manager, reboot
    5. Download and install safetynet-fix in the Magisk manager, reboot
    6. Check with a safetynet checker app and you should pass :)

    If you plan to use a sim card in your device, I would recommend to disable the pin code before with another device.
    In some cases the sim card becomes unusable while typing in the code.

    Do you like my work?
    Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
    I'm doing this in my free time and it also costs a lot of money to buy hardware.

    donate

    Wanna improve your sound configs?
    Now you can use my app to access all boeffla sound configurations.

    XDA:DevDB Information
    [ROM][13.x][N8000/N801x/N8020][BETA] LineageOS 20.0, ROM for the Samsung Galaxy Note 10.1

    Contributors

    html6405
    Source Code: https://github.com/html6405

    ROM OS Version: 13.x T
    ROM Kernel: Linux 3.x
    ROM Firmware Required: TWRP 3.5.2
    Based On: LineageOS
    Selinux: permissive, this only makes sense as soon the ROM is stable.

    Version Information
    Status:
    Alpha

    Created 2022-11-02
    Last Updated 2023-03-06
    7
    Update 15.01.2023:
    • Synced with latest LineageOS sources
    • Set swappiness back to 100
    • Fixed SamsungDoze
    • Fixed stylus gestures
    • Moved to 3.4 kernel for n8000 and n8010
    • Fixed dock / undock behavior for docking stations
    5
    Update 06.03.2023:
    • Synced with LineageOS sources from February
    4
    everything working fine at my end.
    I'm using LOS20 + Magisk+BigGapps Magisk module. the setup quite stable and performance is usable.
    3
    Finally fixed the wake up problem in kernel, it took some time to figure out which driver was faulty.
    Only for N8000 and N8010 at the moment.

    Attention: this is only a test kernel at the moment, if you want to try it, there still could be other issues.