LineageOS 20.0 (Android 13) for GT-N8000 GT-N8005 GT-N8010 GT-N8013 GT-N8020 ALPHA

Search This thread

tinotraver#

Member
Oct 18, 2022
15
2
Hi, about flashing magisk apk, how can I do it if TWRP does not show the apk file in install section? I am using TWRP 3.5.0_9-0 .
Thank you.
 

tinotraver#

Member
Oct 18, 2022
15
2
I have tested the rom and can say that, at the moment, don't want to root my device seen that I use it only for reading books and watching videos.
The Aurora store is pretty good and, for me, is useful as the Play Store.
I hope, but i am sure , you can solve the problem about the random reboots and I want to thank you for your incredible job, considering I can use a device I bought 12 years ago.
 
Unearthed my broken N8000, ordered a replacement motherboard from AliExpress, they sent a N8010 board still installed it (got my AU$25 refunded) installed this rom used microg. Great, rare reboots, had to use Gmail as the only mail app that allowed access to my Gmail account and had to spoof titanium to get around licensed check.
Great implementation of Android 13, can't wait till the next update.....Thanks
 
  • Like
Reactions: html6405

SteelK

Senior Member
Jan 30, 2015
53
12
25
Мне пришлось бы настроить его по-другому для A9.

Поскольку обновить модифицированные ядра Samsung не так просто, существует множество проблем слияния и других проблем, которые усложняют эту задачу.
Чтобы запустить текущую версию ядра Linux, она должна быть основной, это уже выполняется @Don Carnage, и, возможно, он когда-нибудь добьется успеха в этом.

Я доволен 3.4, если честно, теперь также не должно быть проблем с созданием ubuntu touch или других дистрибутивов Linux для нашего устройства.

Это все еще должно работать, но, пожалуйста, попробуйте и сообщите.
Wow, I would upgrade from LOS 16 to LOS 20 just for the new kernel (I could update my Ubuntu chroot image from 15.10 to the new versions :D). Is there any way to know what the kernel issues are at this point? Is the S-Pen working?
 
Last edited:

html6405

Recognized Developer
Is it possible to find out what problems the kernel has at the moment?
There are pretty the same issues as in the 3.0.101 version + disabled audio jack at the moment.
Yes, the S-PEN is working.
Just a query, ai am having trouble with fox's magisk module....Magisk grants su but the app says it is refused su, running magisk 24.1 with quiet a few modules. Anybody else have this issue?
Are you sure that your magisk, installation works correctly?
Is SU working at all?
 
There are pretty the same issues as in the 3.0.101 version + disabled audio jack at the moment.
Yes, the S-PEN is working.

Are you sure that your magisk, installation works correctly?
Is SU working at all?

There are pretty the same issues as in the 3.0.101 version + disabled audio jack at the moment.
Yes, the S-PEN is working.

Are you sure that your magisk, installation works correctly?
Is SU working at all?
R
 

SteelK

Senior Member
Jan 30, 2015
53
12
25
Exfat sdcard not working on the new kernel? The tablet suggests formatting it even though it was fine, it worked on the old Android 9 kernel.
I let the tablet format the flash card, it chose exFAT, which is weird. It was already in that format, I don't know what he didn't like, maybe the size of the block...

+WiFi 5ghz not work :(
 
Last edited:

mastersrybnik

New member
Nov 22, 2022
1
1
Hi,

Thanks a million for all the effort you put into this.

On my ng8000 sadly I am not able to complete the steps you have suggested:
  1. Download Magisk 24.1 and flash it via TWRP (yes, flash the APK file), reboot- DONE WORKS
  2. Open Magisk and update the App (and do a reboot if it's asking) - DONE WORKS
  3. Enable Zygisk in Magisk - DONE WORKS
  4. Download and install microG installer in the Magisk manager, reboot - DONE WORKS
After rebooting post migroG installation in Magisk when I open Magisk and click on install from storage on the top screen goes black and nothing ever happens. So cant get into Safetynet installation.
General system stability also goes to very low. In general this build is slower and less responsive then 19.1 but after microG instllation its extremely slow.
Tried newest migroG and microG Installer Revived 2.6.3-0 both with the same result.
Wiped and redone los20 and tried BitGapps13 same result.
In general I would say there is something wrong as the file app just sometimes doesnt open for no reason. Magisk hungs randomly and I have to reboot all the time.

From minor things keyboard doesnt work post LOS20 install until I go to settings and manually select physical English US and reboot the tablet. Wifi is taking forever to connect despite me sitting next to the router/wifi.

Nothing like that happens on 19.1 so I went and installed that and it was smooth sailing.
Big thanks again. I really appreciate that I was able to take this 10 years old worthless brick and make it into streaming app tabled with zero adds for my wife so she can watch something while putting our 1yo son to sleep. All thanks to your work and enough instruction to get started.
 
Last edited:
  • Like
Reactions: SteelK

html6405

Recognized Developer
Hi,

Thanks a million for all the effort you put into this.

On my ng8000 sadly I am not able to complete the steps you have suggested:
  1. Download Magisk 24.1 and flash it via TWRP (yes, flash the APK file), reboot- DONE WORKS
  2. Open Magisk and update the App (and do a reboot if it's asking) - DONE WORKS
  3. Enable Zygisk in Magisk - DONE WORKS
  4. Download and install microG installer in the Magisk manager, reboot - DONE WORKS
After rebooting post migroG installation in Magisk when I open Magisk and click on install from storage on the top screen goes black and nothing ever happens. So cant get into Safetynet installation.
General system stability also goes to very low. In general this build is slower and less responsive then 19.1 but after microG instllation its extremely slow.
Tried newest migroG and microG Installer Revived 2.6.3-0 both with the same result.
Wiped and redone los20 and tried BitGapps13 same result.
In general I would say there is something wrong as the file app just sometimes doesnt open for no reason. Magisk hungs randomly and I have to reboot all the time.

From minor things keyboard doesnt work post LOS20 install until I go to settings and manually select physical English US and reboot the tablet. Wifi is taking forever to connect despite me sitting next to the router/wifi.

Nothing like that happens on 19.1 so I went and installed that and it was smooth sailing.
Big thanks again. I really appreciate that I was able to take this 10 years old worthless brick and make it into streaming app tabled with zero adds for my wife so she can watch something while putting our 1yo son to sleep. All thanks to your work and enough instruction to get started.
Thanks for your report,
but I think there was something else wrong with your installation.
I don't know how it's working for other people, but for me it works as good as LineageOS 19.1 does.
But stay prepared, there will be more builds with improvements.
 
  • Like
Reactions: mastersrybnik

alexhguerra

Member
Oct 4, 2015
15
1
Hello.
TWRP 3.5
I can reach magisk install, update it , but noway to enable zygist.I suppose i need root
Which is the safest and most straightforward way?
Amazing stuff by the way.
where to tip for the great effort u did , html6405?
 
  • Like
Reactions: html6405

Alexfs

Senior Member
Oct 7, 2014
150
79
Hello,
I was not successful in my tests, MicroG does not allow logging in, it closes and the information that fails to close the application is always displayed. In addition to being crashing a lot and the applications stop responding. With gapps, not much has changed either, applications fail or simply do not open. But I know it's still in Alfa and still has a lot of work to do. Anyway I am very grateful to our friend html6405, who has been making an effort to keep our devices alive.
At the moment I went back to Lineage 19 which is more stable to use on a daily basis.
As soon as another Lineage 20 update comes out, I'll test again.(y)
 
  • Like
Reactions: html6405

Top Liked Posts

  • There are no posts matching your filters.
  • 7
    Update 15.01.2023:
    • Synced with latest LineageOS sources
    • Set swappiness back to 100
    • Fixed SamsungDoze
    • Fixed stylus gestures
    • Moved to 3.4 kernel for n8000 and n8010
    • Fixed dock / undock behavior for docking stations
    2
    Mine is 8010.
    Try not to install any gapps.

    If you read the developer's recommendation.
    (Gapps, I don't recommend them, use the smallest package)
    Arm64 is completely wrong.
    On my device arm32 works without error.
    The developer did a very good job as always.
    The arm64 is causing the error.
    Try installing without gapps.
    It should work.
    2
    Thank you for looking into it as ACC module did not work on our device, sadly.
    This isn't supported in the driver yet, but give me some time to check this.
    2
    Wow, thanks. I see that kernel that you linked is from Jan 01 2023 and @html6405 has a newer kernel for N8000 Jan 13 2023, I'm guessing I should install the Jan 13 version rather? https://androidfilehost.com/?w=files&flid=337158

    I see there are a lot of files in there.
    Before I install the zip with TWRP, how can I backup my current kernel?

    @html6405 I just sent you €10
    I was going to do €1 per month. If everyone with these devices did a monthly subscription it would be nice support for your work on this. But I decided to do rather do larger amounts once in a while so that the money doesn't mostly get eaten by PalPal fees.
    The latest version of the 13th is worth testing, the developer is always making corrections. IF it's possible to back up your kernel, that's good because if something goes wrong you can go back to the old version.
    1
    arm64 is no good because you need arm32.
  • 20
    Code:
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    *
    */

    Hi,

    here you can find my version of LineageOS 20 for our Samsung Galaxy Note 10.1 devices.
    At first I want to thank @rINanDO and @ChronoMonochrome for all your work which helped me a lot.

    This is a ALPHA build, also on the LineageOS side, so don't install it if you want a complete and stable rom and don't report my already listed bugs!

    Here you can see how far everything is working for now.

    N8000, N8010, N8013, N8020:
    • Boot
    • Bluetooth
    • Audio
    • Graphics
    • Cameras
    • Sensors
    • GPS
    • Wifi
    • USB
    • Video playback (HW/SW)
    • Tethering via USB, WIFI and Bluetooth
    • consumerir transmitter
    • Stylus with gestures and hovering icon
    • RIL
    • sec_keyboard docking station
    • much more...
    • Random reboots
    • Long screenshot
    • SD-Card can't be formatted as internal storage, this will cause a bootloop
    If you don't like it, reboot into recovery and type the following command:
    I would recommend to use microG instead of BitGapps,
    here you can find the installation instructions:
    1. Download Magisk 24.1 and flash it via TWRP (yes, flash the APK file), reboot
    2. Open Magisk and update the App (and do a reboot if it's asking)
    3. Enable Zygisk in Magisk
    4. Download and install microG installer in the Magisk manager, reboot
    5. Download and install safetynet-fix in the Magisk manager, reboot
    6. Check with a safetynet checker app and you should pass :)

    If you plan to use a sim card in your device, I would recommend to disable the pin code before with another device.
    In some cases the sim card becomes unusable while typing in the code.

    Do you like my work?
    Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
    I'm doing this in my free time and it also costs a lot of money to buy hardware.

    donate

    Wanna improve your sound configs?
    Now you can use my app to access all boeffla sound configurations.

    XDA:DevDB Information
    [ROM][13.x][N8000/N801x/N8020][BETA] LineageOS 20.0, ROM for the Samsung Galaxy Note 10.1

    Contributors

    html6405
    Source Code: https://github.com/html6405

    ROM OS Version: 13.x T
    ROM Kernel: Linux 3.x
    ROM Firmware Required: TWRP 3.5.2
    Based On: LineageOS
    Selinux: permissive, this only makes sense as soon the ROM is stable.

    Version Information
    Status:
    Alpha

    Created 2022-11-02
    Last Updated 2022-11-02
    7
    Update 15.01.2023:
    • Synced with latest LineageOS sources
    • Set swappiness back to 100
    • Fixed SamsungDoze
    • Fixed stylus gestures
    • Moved to 3.4 kernel for n8000 and n8010
    • Fixed dock / undock behavior for docking stations
    4
    everything working fine at my end.
    I'm using LOS20 + Magisk+BigGapps Magisk module. the setup quite stable and performance is usable.
    3
    Here you can find a new test kernel (3.4) with fixed audio jack :).

    3
    Finally fixed the wake up problem in kernel, it took some time to figure out which driver was faulty.
    Only for N8000 and N8010 at the moment.

    Attention: this is only a test kernel at the moment, if you want to try it, there still could be other issues.