LineageOS 20.0 (Android 13) for GT-N8000 GT-N8005 GT-N8010 GT-N8013 GT-N8020 ALPHA

Search This thread

sashasim

Member
Mar 6, 2021
9
3
Hello. I have n 8000. Does GPS work stably in this firmware ? Does it catch a lot of satellites? And then in the 18 and 16 firmware, my GPS practically does not work.
 

G4stavoM1ster

Senior Member
Feb 21, 2022
62
2
Hey @html6405, I just installed this ROM for my GT-N8000, but it keeps sending me to the TWRP after reboot even with the ROM installed without problems, what I should do?
 

Mart2023

New member
Feb 10, 2023
2
0
Please can you help me out. On my n8000
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/

Hi,

here you can find my version of LineageOS 20 for our Samsung Galaxy Note 10.1 devices.
At first I want to thank @rINanDO and @ChronoMonochrome for all your work which helped me a lot.

This is a ALPHA build, also on the LineageOS side, so don't install it if you want a complete and stable rom and don't report my already listed bugs!

Here you can see how far everything is working for now.

N8000, N8010, N8013, N8020:
  • Boot
  • Bluetooth
  • Audio
  • Graphics
  • Cameras
  • Sensors
  • GPS
  • Wifi
  • USB
  • Video playback (HW/SW)
  • Tethering via USB, WIFI and Bluetooth
  • consumerir transmitter
  • Stylus with gestures and hovering icon
  • RIL
  • sec_keyboard docking station
  • much more...
  • Random reboots
  • Long screenshot
  • SD-Card can't be formatted as internal storage, this will cause a bootloop
If you don't like it, reboot into recovery and type the following command:
I would recommend to use microG instead of BitGapps,
here you can find the installation instructions:
  1. Download Magisk 24.1 and flash it via TWRP (yes, flash the APK file), reboot
  2. Open Magisk and update the App (and do a reboot if it's asking)
  3. Enable Zygisk in Magisk
  4. Download and install microG installer in the Magisk manager, reboot
  5. Download and install safetynet-fix in the Magisk manager, reboot
  6. Check with a safetynet checker app and you should pass :)

If you plan to use a sim card in your device, I would recommend to disable the pin code before with another device.
In some cases the sim card becomes unusable while typing in the code.

Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.

donate

Wanna improve your sound configs?
Now you can use my app to access all boeffla sound configurations.

XDA:DevDB Information
[ROM][13.x][N8000/N801x/N8020][BETA] LineageOS 20.0, ROM for the Samsung Galaxy Note 10.1

Contributors

html6405
Source Code: https://github.com/html6405

ROM OS Version: 13.x T
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.5.2
Based On: LineageOS
Selinux: permissive, this only makes sense as soon the ROM is stable.

Version Information
Status:
Alpha

Created 2022-11-02
Last Updated 2022-11-02
Please can you help me out. I installed lineage os 18.1 (android 11) on my Samsung galaxy note 10.1 n8000. But I can't find a compatible gapps to install and my speech functions/microphone does not work. Please out. Thanks
 

Mart2023

New member
Feb 10, 2023
2
0
Please can you help me out. On my n8000
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/

Hi,

here you can find my version of LineageOS 20 for our Samsung Galaxy Note 10.1 devices.
At first I want to thank @rINanDO and @ChronoMonochrome for all your work which helped me a lot.

This is a ALPHA build, also on the LineageOS side, so don't install it if you want a complete and stable rom and don't report my already listed bugs!

Here you can see how far everything is working for now.

N8000, N8010, N8013, N8020:
  • Boot
  • Bluetooth
  • Audio
  • Graphics
  • Cameras
  • Sensors
  • GPS
  • Wifi
  • USB
  • Video playback (HW/SW)
  • Tethering via USB, WIFI and Bluetooth
  • consumerir transmitter
  • Stylus with gestures and hovering icon
  • RIL
  • sec_keyboard docking station
  • much more...
  • Random reboots
  • Long screenshot
  • SD-Card can't be formatted as internal storage, this will cause a bootloop
If you don't like it, reboot into recovery and type the following command:
I would recommend to use microG instead of BitGapps,
here you can find the installation instructions:
  1. Download Magisk 24.1 and flash it via TWRP (yes, flash the APK file), reboot
  2. Open Magisk and update the App (and do a reboot if it's asking)
  3. Enable Zygisk in Magisk
  4. Download and install microG installer in the Magisk manager, reboot
  5. Download and install safetynet-fix in the Magisk manager, reboot
  6. Check with a safetynet checker app and you should pass :)

If you plan to use a sim card in your device, I would recommend to disable the pin code before with another device.
In some cases the sim card becomes unusable while typing in the code.

Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.

donate

Wanna improve your sound configs?
Now you can use my app to access all boeffla sound configurations.

XDA:DevDB Information
[ROM][13.x][N8000/N801x/N8020][BETA] LineageOS 20.0, ROM for the Samsung Galaxy Note 10.1

Contributors

html6405
Source Code: https://github.com/html6405

ROM OS Version: 13.x T
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.5.2
Based On: LineageOS
Selinux: permissive, this only makes sense as soon the ROM is stable.

Version Information
Status:
Alpha

Created 2022-11-02
Last Updated 2022-11-02
Please can you help me out. I installed lineage os 18.1 (android 11) on my Samsung galaxy note 10.1 n8000. But I can't find a compatible gapps to install and my speech functions/microphone does not work. Please out. Thanks
 

sashasim

Member
Mar 6, 2021
9
3
Hello, something almost nothing works for me. Programs are installed, but when they are opened, they are immediately closed. What could be the problem?
 

Mariog80

Member
Sep 10, 2021
9
2
Hello!
Thank you for this great work!
I've basically 2 problems: I don't have the phone nor the sms app in my n8000 (I use them...) and I can't install any kind of Gapps, neither the NikGApps core (low spce). MicroG doesn't allows me to restore my previous backup from google...
Would you be so kind to help me?
Thx!
 

SkyWorldWide

Member
Oct 24, 2017
33
10
I installed the LineageOS 20 rom and MicroG in my GT-N8000 and everything works well. I like the Aurora Store but just out of curiosity, is it possible to install the Google Play Store as well?.
I tried to get an apk of it and install it but it doesn't work, it says update. I'm not familiar with the fakestore apk that's found in MicroG.

Any help to install Playstore or get it working with MicroG installed?
 

html6405

Recognized Developer
Hello my friend, it's good to know that you haven't abandoned us, it's been a long time without you speaking here on the forum, I hope all is well with you.
Any updates from you?
Is there any improvement?
I've tried to fix:

Code:
03-09 16:34:18.385  1415  1415 F DEBUG   :       #00 pc 000059f4  /vendor/lib/hw/gralloc.exynos4.so (gralloc_perform(gralloc_module_t const*, int, ...)+192) (BuildId: 9103597dfaf8e3bcbd30e2affc18327b)
03-09 16:34:18.385  1415  1415 F DEBUG   :       #01 pc 00008991  /vendor/lib/hw/gralloc.exynos4.so (android::hardware::Gralloc1On0Adapter::retain(native_handle const*)+336) (BuildId: 9103597dfaf8e3bcbd30e2affc18327b)

But I had no time to test enough to see if it's fixed now.

Everything is fine, I just have to work 8 - 12 hours per day and I'm struggling to find some time for android, but I try find one day per week.
I installed the LineageOS 20 rom and MicroG in my GT-N8000 and everything works well. I like the Aurora Store but just out of curiosity, is it possible to install the Google Play Store as well?.
Yes, the patched PlayStore still should work with microG (but untested by myself) and I'm using NikGapps on one of my devices without any problem.
Would it be possible for you to provide a .zip to resize the system partition so we can install gapps on this rom?
That's a good idea, I will add it to the list.
Newer packages need to much space, I'm using an older and smaller one (NikGapps).
Can't seem to set a wallpaper
Hmm just tested it, it seems to work fine here, whats exactly happening?
 
  • Like
Reactions: w_tapper

w_tapper

Senior Member
I've tried to fix:

Code:
03-09 16:34:18.385  1415  1415 F DEBUG   :       #00 pc 000059f4  /vendor/lib/hw/gralloc.exynos4.so (gralloc_perform(gralloc_module_t const*, int, ...)+192) (BuildId: 9103597dfaf8e3bcbd30e2affc18327b)
03-09 16:34:18.385  1415  1415 F DEBUG   :       #01 pc 00008991  /vendor/lib/hw/gralloc.exynos4.so (android::hardware::Gralloc1On0Adapter::retain(native_handle const*)+336) (BuildId: 9103597dfaf8e3bcbd30e2affc18327b)

But I had no time to test enough to see if it's fixed now.

Everything is fine, I just have to work 8 - 12 hours per day and I'm struggling to find some time for android, but I try find one day per week.

Yes, the patched PlayStore still should work with microG (but untested by myself) and I'm using NikGapps on one of my devices without any problem.

That's a good idea, I will add it to the list.
Newer packages need to much space, I'm using an older and smaller one (NikGapps).

Hmm just tested it, it seems to work fine here, whats exactly happening?
the settings app crashes whenever I try to set a wallpaper, newest los 20 build with microg
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Hello everyone, if you want, I can make a constantly updated kernel for this device. But I need some information. Can you teach me? I believe I can do this.I just need some information. I want to be the new developer of GT-N80XX devices. I've carried Samsung Experience 9 myself before. However, it had many errors and I did not point it out. I'm waiting to hear from you. A new developer is coming to Samsung Galaxy Note 10.1.I would also like to add that this rum is truly excellent. You are not human.
    Emir
    Kind regards
    @html6405
  • 35
    Code:
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    *
    */

    Hi,

    here you can find my version of LineageOS 20 for our Samsung Galaxy Note 10.1 devices.
    At first I want to thank @rINanDO and @ChronoMonochrome for all your work which helped me a lot.

    This is a ALPHA build, also on the LineageOS side, so don't install it if you want a complete and stable rom and don't report my already listed bugs!

    Here you can see how far everything is working for now.

    N8000, N8010, N8013, N8020:
    • Boot
    • Bluetooth
    • Audio
    • Graphics
    • Cameras
    • Sensors
    • GPS
    • Wifi
    • USB
    • Video playback (HW/SW)
    • Tethering via USB, WIFI and Bluetooth
    • consumerir transmitter
    • Stylus with gestures and hovering icon
    • RIL
    • sec_keyboard docking station
    • much more...
    • Random reboots
    • Long screenshot
    • SD-Card can't be formatted as internal storage, this will cause a bootloop
    • Network monitoring because of missing eBPF support
    If you don't like it, reboot into recovery and type the following command:
    I would recommend to use microG instead of BitGapps,
    here you can find the installation instructions:
    1. Download Magisk 24.1 and flash it via TWRP (yes, flash the APK file), reboot
    2. Open Magisk and update the App (and do a reboot if it's asking)
    3. Enable Zygisk in Magisk
    4. Download and install microG installer in the Magisk manager, reboot
    5. Download and install safetynet-fix in the Magisk manager, reboot
    6. Check with a safetynet checker app and you should pass :)

    If you plan to use a sim card in your device, I would recommend to disable the pin code before with another device.
    In some cases the sim card becomes unusable while typing in the code.

    Do you like my work?
    Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
    I'm doing this in my free time and it also costs a lot of money to buy hardware.

    donate

    Wanna improve your sound configs?
    Now you can use my app to access all boeffla sound configurations.

    XDA:DevDB Information
    [ROM][13.x][N8000/N801x/N8020][BETA] LineageOS 20.0, ROM for the Samsung Galaxy Note 10.1

    Contributors

    html6405
    Source Code: https://github.com/html6405

    ROM OS Version: 13.x T
    ROM Kernel: Linux 3.x
    ROM Firmware Required: TWRP 3.5.2
    Based On: LineageOS
    Selinux: permissive, this only makes sense as soon the ROM is stable.

    Version Information
    Status:
    Alpha

    Created 2022-11-02
    Last Updated 2023-09-12
    7
    Update 12.09.2023:
    • Moved and synced with Lineage-UL
    • Added SamsungServiceMode
    7
    Update 06.03.2023:
    • Synced with LineageOS sources from February
    7
    Update 15.01.2023:
    • Synced with latest LineageOS sources
    • Set swappiness back to 100
    • Fixed SamsungDoze
    • Fixed stylus gestures
    • Moved to 3.4 kernel for n8000 and n8010
    • Fixed dock / undock behavior for docking stations
    6
    Hey guys,
    Hope all is well with our friend html6405, it's been a long time since he's posted anything. He was the one who had been keeping our device up to date.
    I hope he comes back to support us.
    But first of all I hope you are in good health.
    A big hug my friend!