LineageOS 20.0 (Android 13) [Signature Spoofing][OTA updates] for S8/S8+/Note8

Search This thread

li70

Senior Member
May 5, 2010
169
32
Good to see you keeping alive the note8, thank you for that.
It would be great to find a solution like Dex on Lineage. Thank you for the great work man.:)
 

ravrage

Member
Oct 4, 2013
33
6
Updated via bult in updater and it went smooth.

Touchscreen responsiveness feels a bit better now and how do I disable this annoying seedvault thing? Wtf is that?
Delete seedvault folder from both storage and clear cache the seedvalut then try to stop notifications the issues mostly from encryption that was deperecated in los 19 and removed in 20


I assume you are not using seedvault for backups
 

Ivan_Meler

Forum Moderator / Recognized Developer
Staff member
@Ivan_Meler Is it possible to add proximity sensor wave wakeup screen feature as in Samsung Pie ROM?
from my previous experience it caused too much battery drain, samsung does some proprietary magic in sensors service that listens to other events to wake up proximity.
should be possible but def. not highest on priority list right now, i want to look into hrm first when it comes to sensors
 

petit.boeuf

Member
Nov 16, 2022
11
0
Hello everyone,
Thanks a lot for the great work !
For me everything works like a charm but 2 things.
  1. Has anyone encountered issues with the app Signal ? I can't make it run...
  2. And another question, is it possible to activate SELinux ?
Thanks again !
 

K4RR4S

Member
Jun 11, 2022
14
7
k5tUT1V.png

LineageOS 20.0 for Exynos 8895 devices

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/

Working:
- Wifi
- Sound
- mali drivers
- USB tethering
- HW Backed video Playback
- Ril (Mobile data,calls, sms and stuff)
- Sensors
- Buttons
- Bluetooth
- Wifi HotSpot
- MTP
- 2D and 3D gpu acceleration
- HW encoding/decoding
- Charging with device powered off
- Stuff I didn't test yet
- Camera
- GPS
- Fingerprint Sensor
- Mobicore
- SW codecs

Not Working
- Storage Encryption (WIP switching to FBE from FDE since FDE was removed in 13)


Keep in mind that some LineageOS features have not been completed yet this is not a device bug and please do not report those

Also do not post bug reports for known issues or bug reports without proper
a) Logcat
b) proc/last_kmsg (or proc/kmsg)
c) data/tombstones
d) dmesg



Install gapps right after installing the rom itself don't try to boot to system before that if you want to use gapps (Or wipe data before installing them)

NikGapps have been updated to 13, you might need to clean flash if you used other gapps in past including nikgapps 12.1 version

Make sure you are using latest official TWRP before installing rom older versions do not have proper android 12/13 support

Downloads:
Google Drive
Mega.nz
GitHub releases

if you want to support the project feel free to buy me some coffee paypal.me/ivanmeler

BTC: 1Q823BsSbEKP62JFM7BjXiRCgF84qgcFST
ETH(erc20): 0xc7272f851a692c679e85f18a62632c580ef3bdee
Donations help cover the build server cost and since I do this in my free time, and also cover the coffee for time spent debugging stuff


Feel free to join telegram group with early builds progress updates and some off topic stuff Join

Based On Android 13/T
Changelog

08.11.2022.
- Merged November 2022. Security update
- Switched to new AIDL usb hal
- Switched kernel back to clang toolchain
- Misc performance and stability improvements
- Synced with LineageOS source

04.10.2022.
- Merged october 2022. Security update
- Improved UI performance
- Improved stock camera app
- Synced with LineageOS source

01.10.2022.
- Fixed samsungs bug with gps where it would start acting up over time due to time rollover bug
- Synced with LineageOS source

28.09.2022.
- Adressed missing symbol in advanced camera effects lib that wouldnt launch without them
- Allowed system to override some bluetooth props
- Performance and stability improvements
- Synced with LineageOS source (Almost all of lineageos features should be there and work now)

21.09.2022.
- Switched to Generic FunctionFS usb backend (We used legacy functionfs in past)
- Updated USB hal
- Usb hal will now give notifications on port being wet instead of just disabling it without notice
- Merged few more missing BPF commits to kernel
- Unpinned deprecated updatable media apex jar from ram
- Synced with LineageOS source

19.09.2022.
- Updated kernel build flags for new build enviroment
- Misc performance and stability improvements
Switched to source built Bluetooth interface
- Cleaned up device source
- Synced with LineageOS source

07.09.2022.
- Merged September 2022. Security update
- Updated chromium webview to 105.0.5195.79
- Added more customization options powered by Monet
- Misc performance and stability improvements
- Synced with LineageOS source

06.09.2022.
- Fixed home button wake

05.09.2022.
- Fixed camera on Note 8
- Most of lineageos features have been implemented
- Misc performance and stability improvements
- Synced with LineageOS source

- Fixed bluetooth audio
- Upreved audio hal to 7.1 from 5.0
- Implemented custom audio service used to load audio hal
- Backported more BPF changes to kernel
- Switched to webview 105.0.5195.68 which is native to T
- Cleaned up the source and patches used to build the rom
- Synced with LineageOS source

27.08.2022.
- Initial release




Contributors
Ivan_Meler
Source Code: https://github.com/8890q/

ROM OS Version: Android 13
ROM Kernel: Linux 4.4.302
Greatlte "zip is corrupt"
 

Canh

New member
Feb 6, 2015
4
1
Hi all,
I cannot find recording file in storage of phone. What is that folder?
Or lineageos-20 has not the recording function.
Please help me
Thanks
 

petit.boeuf

Member
Nov 16, 2022
11
0
Hi all,
I cannot find recording file in storage of phone. What is that folder?
Or lineageos-20 has not the recording function.
Please help me
Thanks
Hi,
In my case the recordings end up in the Recordings folder (I've used the default app). Have you grant the app with all the authorisation ?
 

Canh

New member
Feb 6, 2015
4
1
Hi Petit.boeuf
In my phone, Recording folder is empty. What app that you mean "grant the app with all the authorisation"? Phone app that I granted all permissions.
Please guide me grant it.
Thanks
 

petit.boeuf

Member
Nov 16, 2022
11
0
Hi Petit.boeuf
In my phone, Recording folder is empty. What app that you mean "grant the app with all the authorisation"? Phone app that I granted all permissions.
Please guide me grant it.
Thanks
When you go in :
  • the settings of the phone,
  • then application menu,
  • then select the one you're dealing with (recorder in English I think),
  • then select the sub-menu authorisation,
  • check if microphone and phone are authorised (see the attached picture)
If it is already authorised, then I can't help you but maybe someone else could ;)
 

Attachments

  • Screenshot_20221122-150858_Contrôleur d'autorisations.png
    Screenshot_20221122-150858_Contrôleur d'autorisations.png
    149.6 KB · Views: 41

Canh

New member
Feb 6, 2015
4
1
When you go in :
  • the settings of the phone,
  • then application menu,
  • then select the one you're dealing with (recorder in English I think),
  • then select the sub-menu authorisation,
  • check if microphone and phone are authorised (see the attached picture)
If it is already authorised, then I can't help you but maybe someone else could ;)
In my phone, Recorder app has not phone permission. I wonder why my phone differ your phone!:sleep:
 

Attachments

  • Screenshot_20221122-214929_Trebuchet.png
    Screenshot_20221122-214929_Trebuchet.png
    130.7 KB · Views: 29

Canh

New member
Feb 6, 2015
4
1

Does LineageOS support dual messengers?​

Hi all,
I would like dual telegram, viber,messenger... In the old android, I toggle ON for dual messengers function in setting>develope. But in LOS 20.0 , I do not see that dual messengers function.
What do I do to get dual messengers, please help me.
 
  • Like
Reactions: boumediene walid

Nielzsen

Senior Member
May 11, 2016
55
5
The ROM works really well for me, only issue I can think of is the lack en encryption for now.
Thank you very much for your work!
 

Top Liked Posts

  • There are no posts matching your filters.
  • 11
    Here we go, first builds of 2023. are out. and here is a brief changelog
    - Merged January 2023. Security update
    - Camera app improvements
    - Misc performance and stability improvements
    - Synced with LineageOS source

    This year will mark 6 years since release of s8 and note 8 and well here we are with latest android version and security update.
    Big thanks to everyone who supported this project with donations that helped cover the build server cost and got me coffee, this project wouldnt be possible without them.

    19.1 and 18.1 builds will be released next week

    Enjoy new builds.
    1
    hi thank you for this great rom.
    i have a problem with s-pen
    when i take the pen out there is no problem, when i insert it the os begins continously restarting
    it stops after wiping cache dalvik

    Second, i cant increase and decrese the volume during call

    I am having the same problem with the s-pen as well, I'll try to give some more details and the results of my testing:

    How to reproduce:
    - Activate Power Saving mode
    - Take out S-Pen and touch or hover over the display
    - Press the power button

    This will happen:
    - Device shows boot animation and restarts itself (1st restart)
    - Screen looks normal and touch works, but the buttons are not functional
    - After some time (~1 minute) the device will restart itself again (2nd restart)
    - When the device comes back it shows a black screen and the status bar
    - You can exit this state by holding down the power button until a reboot menu appears, and restart again (3rd restart)
    - After the device restarted, everything is back to normal

    Exactly this happens to me every time. The issue only appears when power saving mode is enabled. I disabled all magisk modules but it still happens. Can someone else with note 8 confirm or deny that this happens?

    I attached a demonstration video, plus multiple logs (number 1 = before first restart; number 2 = before second restart; number 3 = before third restart) and the tombstone. The second and third log recordings were started after the system booted, so I am not sure if they contain everything. I only attached kmsg from before the first restart as the others were empty.

    I think that's all, let me know if something else is needed.

    (P.S. this is my first post here so I'm sorry if i messed something up)
  • 34
    k5tUT1V.png

    LineageOS 20.0 for Exynos 8895 devices

    Code:
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */

    Working:
    - Wifi
    - Sound
    - mali drivers
    - USB tethering
    - HW Backed video Playback
    - Ril (Mobile data,calls, sms and stuff)
    - Sensors
    - Buttons
    - Bluetooth
    - Wifi HotSpot
    - MTP
    - 2D and 3D gpu acceleration
    - HW encoding/decoding
    - Charging with device powered off
    - Stuff I didn't test yet
    - Camera
    - GPS
    - Fingerprint Sensor
    - Mobicore
    - SW codecs

    Not Working
    - Storage Encryption (WIP switching to FBE from FDE since FDE was removed in 13)


    Keep in mind that some LineageOS features have not been completed yet this is not a device bug and please do not report those

    Also do not post bug reports for known issues or bug reports without proper
    a) Logcat
    b) proc/last_kmsg (or proc/kmsg)
    c) data/tombstones
    d) dmesg



    Install gapps right after installing the rom itself don't try to boot to system before that if you want to use gapps (Or wipe data before installing them)

    NikGapps have been updated to 13, you might need to clean flash if you used other gapps in past including nikgapps 12.1 version

    Make sure you are using latest official TWRP before installing rom older versions do not have proper android 12/13 support

    Downloads:
    Google Drive
    Mega.nz
    GitHub releases

    if you want to support the project feel free to buy me some coffee paypal.me/ivanmeler

    BTC: 1Q823BsSbEKP62JFM7BjXiRCgF84qgcFST
    ETH(erc20): 0xc7272f851a692c679e85f18a62632c580ef3bdee
    Donations help cover the build server cost and since I do this in my free time, and also cover the coffee for time spent debugging stuff


    Feel free to join telegram group with early builds progress updates and some off topic stuff Join

    Based On Android 13/T
    Changelog

    04.01.2023.
    - Merged January 2023. Security update
    - Camera app improvements
    - Misc performance and stability improvements
    - Synced with LineageOS source

    15.12.2022.
    - Added back some features that were missing from QPR1
    - Misc performance and stability improvements
    - Synced with LineageOS source

    09.12.2022.
    - Merged December 2022. Security update
    - Merged android QPR1 December update
    - Synced with LineageOS source

    08.11.2022.
    - Merged November 2022. Security update
    - Switched to new AIDL usb hal
    - Switched kernel back to clang toolchain
    - Misc performance and stability improvements
    - Synced with LineageOS source

    04.10.2022.
    - Merged october 2022. Security update
    - Improved UI performance
    - Improved stock camera app
    - Synced with LineageOS source

    01.10.2022.
    - Fixed samsungs bug with gps where it would start acting up over time due to time rollover bug
    - Synced with LineageOS source

    28.09.2022.
    - Adressed missing symbol in advanced camera effects lib that wouldnt launch without them
    - Allowed system to override some bluetooth props
    - Performance and stability improvements
    - Synced with LineageOS source (Almost all of lineageos features should be there and work now)

    21.09.2022.
    - Switched to Generic FunctionFS usb backend (We used legacy functionfs in past)
    - Updated USB hal
    - Usb hal will now give notifications on port being wet instead of just disabling it without notice
    - Merged few more missing BPF commits to kernel
    - Unpinned deprecated updatable media apex jar from ram
    - Synced with LineageOS source

    19.09.2022.
    - Updated kernel build flags for new build enviroment
    - Misc performance and stability improvements
    Switched to source built Bluetooth interface
    - Cleaned up device source
    - Synced with LineageOS source

    07.09.2022.
    - Merged September 2022. Security update
    - Updated chromium webview to 105.0.5195.79
    - Added more customization options powered by Monet
    - Misc performance and stability improvements
    - Synced with LineageOS source

    06.09.2022.
    - Fixed home button wake

    05.09.2022.
    - Fixed camera on Note 8
    - Most of lineageos features have been implemented
    - Misc performance and stability improvements
    - Synced with LineageOS source

    - Fixed bluetooth audio
    - Upreved audio hal to 7.1 from 5.0
    - Implemented custom audio service used to load audio hal
    - Backported more BPF changes to kernel
    - Switched to webview 105.0.5195.68 which is native to T
    - Cleaned up the source and patches used to build the rom
    - Synced with LineageOS source

    27.08.2022.
    - Initial release




    Contributors
    Ivan_Meler
    Source Code: https://github.com/8890q/

    ROM OS Version: Android 13
    ROM Kernel: Linux 4.4.302
    11
    Here we go, first builds of 2023. are out. and here is a brief changelog
    - Merged January 2023. Security update
    - Camera app improvements
    - Misc performance and stability improvements
    - Synced with LineageOS source

    This year will mark 6 years since release of s8 and note 8 and well here we are with latest android version and security update.
    Big thanks to everyone who supported this project with donations that helped cover the build server cost and got me coffee, this project wouldnt be possible without them.

    19.1 and 18.1 builds will be released next week

    Enjoy new builds.
    10
    Builds are mostly ready for daily use, i had no major issues while testing but some lineageos extras are not implemented yet as its still eaarly days in android 13 development

    Huge thanks to everyone who supported this project, helped cover the build server cost and got me coffee/pizza for time spent on development, This project wouldnt be possible without them

    Also this builds come with full BPF backport to kernel which enables fancy new android 13 features like gpu monitoring
    there were hundreds of kernel commits required to get this working on 4.4 kernel and it took quite a bit of time but new kernel will be used on future 19.1 builds too

    You can find some screenshots here
    9
    New builds are up here is a brief changelog
    - Fixed bluetooth audio
    - Upreved audio hal to 7.1 from 5.0
    - Implemented custom audio service used to load audio hal
    - Backported more BPF changes to kernel
    - Switched to webview 105.0.5195.68 which is native to T
    - Cleaned up the source and patches used to build the rom
    - Synced with LineageOS source

    Do note you might need to clean flash if you used 12.1 gapps that replace default webview and use 13 gapps instead



    Im aware of curent camera issues affecting Note 8 and im working on a fix right now, it will be out ASAP
    tho it might take some time since i dont have note 8 or properly working s8/s8+ for that matter so it takes a bit of time to debug everything

    Huge thanks to everyone who donated and helped cover the build server cost and got me coffee

    Enjoy new builds and stay safe
    9
    Another small update is out, mostly underr the hood changes in this one
    - Switched to Generic FunctionFS usb backend (We used legacy functionfs in past)
    - Updated USB hal
    - Usb hal will now give notifications on port being wet instead of just disabling it without notice
    - Merged few more missing BPF commits to kernel
    - Unpinned deprecated updatable media apex jar from ram
    - Synced with LineageOS source

    Big thanks to everyone who supported this project and helped cover build server cost.
    Enjoy new builds and stay safe