Yea, all the prerequisite are followedIt may seem obvious, but you
checked OEM unlocking and USB Debugging?
Yea, all the prerequisite are followedIt may seem obvious, but you
checked OEM unlocking and USB Debugging?
Yea, all the prerequisite are followed
Never tried that before. Searching online says its an unbrick process. Other than the bootloader unlock issue, phone is working flawless. Device responds to adb and fastboot devices commands and can reboot with commands. But every time I attempt it says slot-counttas not found, slot-suffixes not found etc.,I've done this Bootloader unlock procedure on over 50 phones. So far only one device (Moto Z2 Play) or second generation Moto Z that could not do the procedure. May be Booloader corrupted and may resolve with BlankFlash
this might helpI couldn't get the bootloader unlocked for xt1929-4. I tried different computers, Linux and win. Have latest adb and fastboot. When fastboot OEM get_unlock_data is given, I says counttas slot not found etc., can someone help?
fastboot --set-active=a
fastboot reboot-bootloader
considering the bootloader is unlocked, you may proceed to install magisk immediately after, there's no need to downgradeSorry for double-post
Must I downgrade my phone before installing Magisk? I didn't find the firmware.
My bootloader is unlocked
-13 or -11? Is there some newer firmware than last month's?After I unlocked the bootloader, I installed the firmware PPWS29.131-27-1-7. After that, I installed Magisk Manager and patched the boot image. I rebooted into fastboot mode and flashed the patched image to boot partition.
Now I have the firmware PPWS29.131-27-1-13 with Magisk installed.
Wow. They are fast this months. Last month it was -11, this one we have this update.
It said device does not support slotsCode:fastboot --set-active=a fastboot reboot-bootloader
That's very weird. Are you certain it's a Z3 play? if yes then I'm afraid your unit is deeply defective. Go to the software about section inside the current OS and take a screenshot post it hereIt said device does not support slots
Build number : PPWS29.183-29-1-6That's very weird. Are you certain it's a Z3 play? if yes then I'm afraid your unit is deeply defective. Go to the software about section inside the current OS and take a screenshot post it here
Perhaps the ATT variant doesn't support FB commands...? They react correctly on the Unlocked and Sprint model.Build number : PPWS29.183-29-1-6
This IS an unlocked phone bought from best buy. It was however activated with AT&T at store but we can switch to any carrier any timePerhaps the ATT variant doesn't support FB commands...? They react correctly on the Unlocked and Sprint model.
happened with me too, I think the version 3.3.1-1 is bugged and defective, use the version 3.3.1-0.Got the phone unlocked no problem, was able to fastboot boot twrp.img since the instructions said if you just wanted root to just boot the image and install magisk from there, but it's just stuck on the teamwin loading screen and won't go any further. Anyone got any ideas?