[List][FTF] STOCK FIRMWARES for Xperia T,TL,V,TX

istux

Senior Member
Jun 26, 2012
1,448
1,473
0
Milano
Hello, there is any way of finding the original customization number of my phone? Xperia T? Does this has to with the white sticker on the sim and microsd compartment?

Thanks in advance
Yes, that number is helpful to understand where it comes from.
On internet you can find out from which market is related to and then see on Xperifirm what's the real customization number...

Stock FW Xperia V (LT25i) 9.2.A.2.5 CE4 (1273-8543)
http://www.4shared.com/file/cmaxTW_6ce/LT25i_92A25_CE4.html
Good, I'm adding it to the list ;)
 

po-stit

Member
Mar 27, 2012
33
3
0
Yes, that number is helpful to understand where it comes from.
On internet you can find out from which market is related to and then see on Xperifirm what's the real customization number...


Good, I'm adding it to the list ;)
Thanks, i guess my Custom number is 1265-1626 that is related to the 1266-0027 that is on my white label.
 

swe.rider

Member
Dec 13, 2012
15
1
0
Pretoria
Hi all, I've been searching for hours but obviously am not using the correct search terms.
Please tell me if this is correct: I am on stock 9.2.A.2.5 (LT25i) and would like to flash a .210 stock based custom rom. So I don't need to flash an older FTF since they are both JB?
When do you need to flash older FTF first?
Thanks
 

istux

Senior Member
Jun 26, 2012
1,448
1,473
0
Milano
Hi all, I've been searching for hours but obviously am not using the correct search terms.
Please tell me if this is correct: I am on stock 9.2.A.2.5 (LT25i) and would like to flash a .210 stock based custom rom. So I don't need to flash an older FTF since they are both JB?
When do you need to flash older FTF first?
Thanks
1) Correct, you don't need.
2) Never, if you do it from recovery. Just be sure that the zip you flash includes the proper kernel or you'll get a bootloop.

The only advice is to wipe data if you change android version.
From 4.3 to 4.3 you don't need to wipe. From 4.3 to 4.1.2 a full wipe is recommended. :good:
 
  • Like
Reactions: swe.rider

omarelkhoriby

New member
Aug 4, 2015
3
0
0
cant flash

i have bootloop error and my usb debugging is off so i cant turn it back on
i installed the flashtool devices and when i flash said
-start flashing
-processing loader.sin
-flashing data
-loader : s1_root_7054_version :R5F001 /Boot version : R10am009 / bootloader status : Rootable
-transfer buffer size : 32768
-you must have the according fsc script to flash this device
-flashing finished
-please unplug and start your phonne
-for flashtool unknown sources and debugging must be checked in phone setting
and after i try to start the phone gave me the same problem that is shows me sony logo screen and xperia and colors then restart again and so on
can it be solved
can any one help me to solve it
 

meekspace

Senior Member
Feb 25, 2013
173
16
38
i have bootloop error and my usb debugging is off so i cant turn it back on
i installed the flashtool devices and when i flash said
-start flashing
-processing loader.sin
-flashing data
-loader : s1_root_7054_version :R5F001 /Boot version : R10am009 / bootloader status : Rootable
-transfer buffer size : 32768
-you must have the according fsc script to flash this device
-flashing finished
-please unplug and start your phonne
-for flashtool unknown sources and debugging must be checked in phone setting
and after i try to start the phone gave me the same problem that is shows me sony logo screen and xperia and colors then restart again and so on
can it be solved
can any one help me to solve it
try using Sony PC companion. Go to support, phone/tablet software update, repair my phone/tablet.
 

Ellimista

Member
Aug 27, 2015
6
0
0
LT30a Rogers Wireless 9.2.A.0.295 stock ftf

Hey everyone, thanks for the awesome guides. I was able to follow the linked tutorial and create my own firmware, specifically the LT30a Rogers Wireless 9.2.A.0.295 ftf since it wasn't on the list. I'm a new member so I'd like to add it for others to use but I'm unsure how, could someone explain I should go about uploading it? Thanks again!
 

lpfbs

Member
Aug 31, 2015
5
0
0
31/013/2015 20:13:50 - INFO - Opening device for R/W
31/013/2015 20:13:50 - INFO - Reading device information
31/013/2015 20:13:50 - INFO - Phone ready for flashmode operations.
31/013/2015 20:13:50 - INFO - Opening TA partition 2
31/013/2015 20:13:50 - INFO - Current device : LT30p - CB5123CED5 - 1266-0622_R4J - 1262-6309_9.2.A.1.205 - GLOBAL-HSPA_9.2.A.1.205
31/013/2015 20:13:50 - INFO - Closing TA partition
31/013/2015 20:13:50 - INFO - Start Flashing
31/013/2015 20:13:50 - INFO - Processing loader.sin
31/013/2015 20:13:50 - INFO - Checking header
31/013/2015 20:13:50 - INFO - Flashing data
31/013/2015 20:13:52 - INFO - Loader : S1_Root_7054 - Version : R5F001 / Boot version : R10AM009 / Bootloader status : NOT_ROOTABLE
31/013/2015 20:13:52 - INFO - Transfer buffer size : 32768
31/013/2015 20:13:52 - INFO - You must have the according fsc script to flash this device.
31/013/2015 20:13:52 - INFO - Flashing finished.
31/013/2015 20:13:52 - INFO - Please unplug and start your phone
31/013/2015 20:13:52 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings

all this happens in 1 second and, after reboot, the phone starts with old firmware...
 

Ellimista

Member
Aug 27, 2015
6
0
0
31/013/2015 20:13:50 - INFO - Opening device for R/W
31/013/2015 20:13:50 - INFO - Reading device information
31/013/2015 20:13:50 - INFO - Phone ready for flashmode operations.
31/013/2015 20:13:50 - INFO - Opening TA partition 2
31/013/2015 20:13:50 - INFO - Current device : LT30p - CB5123CED5 - 1266-0622_R4J - 1262-6309_9.2.A.1.205 - GLOBAL-HSPA_9.2.A.1.205
31/013/2015 20:13:50 - INFO - Closing TA partition
31/013/2015 20:13:50 - INFO - Start Flashing
31/013/2015 20:13:50 - INFO - Processing loader.sin
31/013/2015 20:13:50 - INFO - Checking header
31/013/2015 20:13:50 - INFO - Flashing data
31/013/2015 20:13:52 - INFO - Loader : S1_Root_7054 - Version : R5F001 / Boot version : R10AM009 / Bootloader status : NOT_ROOTABLE
31/013/2015 20:13:52 - INFO - Transfer buffer size : 32768
31/013/2015 20:13:52 - INFO - You must have the according fsc script to flash this device.
31/013/2015 20:13:52 - INFO - Flashing finished.
31/013/2015 20:13:52 - INFO - Please unplug and start your phone
31/013/2015 20:13:52 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings

all this happens in 1 second and, after reboot, the phone starts with old firmware...
Hey Ipfbs,

I was hitting the same problem so I think I know what's wrong. The clue is in the line "You must have the according fsc script to flash this device." The reason this happens is because the lastest version of flastools (version 0.9.19.0) requires that you create a template script each time, as described in the most recent changelog ("FTF now cannot be flashed without template script")
Detailed instructions can be found earlier in the thread explaining exactly how these scripts can be made; however, another (much easier) method would be to just downgrade to the previous release by uninstalling flashtools and reinstalling version 0.9.18.6 from the flashtools website.

Follow the same steps as before using this version instead and you should be on your way!
 

lpfbs

Member
Aug 31, 2015
5
0
0
Hey Ipfbs,

I was hitting the same problem so I think I know what's wrong. The clue is in the line "You must have the according fsc script to flash this device." The reason this happens is because the lastest version of flastools (version 0.9.19.0) requires that you create a template script each time, as described in the most recent changelog ("FTF now cannot be flashed without template script")
Detailed instructions can be found earlier in the thread explaining exactly how these scripts can be made; however, another (much easier) method would be to just downgrade to the previous release by uninstalling flashtools and reinstalling version 0.9.18.6 from the flashtools website.

Follow the same steps as before using this version instead and you should be on your way!
nice. and, about the settings, should i pick or not the wipe cache / data / log boxes?
 

Ellimista

Member
Aug 27, 2015
6
0
0
nice. and, about the settings, should i pick or not the wipe cache / data / log boxes?
Yes, keep those checked and also check 'No final Verification'.

Keep in mind that this will wipe all data and settings from the phone, and that you should have found and downloaded OR created your own stock firmware (as a backup) before flashing a new firmware to your phone. A custom recovery should be also be installed, and a full nandroid backup would be handy.