Looking for a FULL ADHESIVE tempered glass protector

[franlando]

I've looked for the past 2 days now and I cannot for the life of me find a decently priced FULL ADHESIVE (tempered glass) screen protector. I ordered a "bubble free" and it looks like garbage, only the edges have adhesive so it's not fully on, it definitely was not tempered glass, and when it's off you can see the rainbow effect.

I'm just confused because the last phone I had was a Note 5 and it wasn't that hard to find a tempered glass screen protector, we didn't have "adhesive edges" back then so all you had to do was spray a bit of water and card out any bubbles. I just upgraded to a Note 8, is this really so hard to find?

I did check out Finally, Tempered glass inexpensive full back adhesive for the Note Post and they do not sell the same product anymore.

Any help is appreciated, thanks.

 

[kxdaorbit]

I've looked for the past 2 days now and I cannot for the life of me find a decently priced FULL ADHESIVE (tempered glass) screen protector. I ordered a "bubble free" and it looks like garbage, only the edges have adhesive so it's not fully on, it definitely was not tempered glass, and when it's off you can see the rainbow effect.
⁷
I'm just confused because the last phone I had was a Note 5 and it wasn't that hard to find a tempered glass screen protector, we didn't have "adhesive edges" back then so all you had to do was spray a bit of water and card out any bubbles. I just upgraded to a Note 8, is this really so hard to find?

I did check out Finally, Tempered glass inexpensive full back adhesive for the Note Post and they do not sell the same product anymore.

Any help is appreciated, thanks.

There are some on Amazon(UK), but they're nigh on impossible to put on without creating bubbles.

Personally I prefer the end result from the ones that you don't like. Maybe I've been lucky but these are what I use on my Note 8, my daughter's Note 9 and my wife's S9. Never spent more than £2.50 on one.

What you realise with experience, is that these will crack sooner rather than later they're all the same bar a minor tweak, 3 - 4 months and you'll be replacing them anyway.

Save your money.

 

[andreasarxon]

i use this and i am very happy..!
it is a uv glue tempered glass like whitestone but a lot cheaper. (i have used whitestone doom in the past and i put them in the same quality)
https://www.ebay.co.uk/itm/For-Sams...d7cc3eb20:m:mORLJDIrICxslUiTcMTsP8A:rk:2:pf:0

 

[khaled147]

Im used whitestone dom. Its really expensive but best. No word..
https://www.ebay.co.uk/itm/WHITESTO...405940&hash=item33f5c2c44c:g:E8QAAOSwSDxbrgwa

 

[iceepyon]

If you do a search on Amazon, you will some really good full adhesive tempered glass screen protectors for your Note 8.

 

[franlando]

If you do a search on Amazon, you will some really good full adhesive tempered glass screen protectors for your Note 8.

The one I ordered WAS from amazon, but it was complete garbage, imagine taking 15$ and just putting it straight into the trash can. Did you have any specific recommendation or..

 

[magichoward]

I have spent well over $60 on screen protectors.. Given up.
So annoyed with the curved screens. May even change brand

 

[petzku]

i use this and i am very happy..!
it is a uv glue tempered glass like whitestone but a lot cheaper. (i have used whitestone doom in the past and i put them in the same quality)
https://www.ebay.co.uk/itm/For-Sams...d7cc3eb20:m:mORLJDIrICxslUiTcMTsP8A:rk:2:pf:0

Gonna try this, thanks!

 

[Liftkit]

I've looked for the past 2 days now and I cannot for the life of me find a decently priced FULL ADHESIVE (tempered glass) screen protector. I ordere3d a "bubble free" and it looks like garbage, only the edges have adhesive so it's not fully on, it definitely was not tempered glass, and when it's off you can see the rainbow effect.

I'm just confused because the last phone I had was a Note 5 and it wasn't that hard to find a tempered glass screen protector, we didn't have "adhesive edges" back then so all you had to do was spray a bit of water and card out any bubbles. I just upgraded to a Note 8, is this really so hard to find?

I did check out Finally, Tempered glass inexpensive full back adhesive for the Note Post and they do not sell the same product anymore.

Any help is appreciated, thanks.

Good luck finding anything that will come factory with "full adhesive" I have tried every type in the book short of the over priced white dome. I ended up finding a perfect solution (for me) though a 3D or 4D"d Temp glass protector as its advertised anyways... i think they're all pretty much the same at the point of "D" in the description but that being said they are only like 6 bucks a piece for a full cover option i opted for with out the whole top section cut out around the speakers and camera. They were only edged adhesive but the trick is to use the LOCA glue to adhere it to the phone... I am aware its for LCD screen repairs but if you get the 2500 viscosity its a lot thicker and it never fully cures even under a black light but it has the right amount of stickiness to stay on the phone seamlessly on my note 8 and have no popping or issues with input of the s pen, Its great! the corners dont lift even its on there good. Yes ive cracked and had to replace them before so i can vouch they are remove-able. I will add if they are on there a long time that around the bottom center where you usually touch the screen the most it can be a pain in the ass to get it separated.. Ive found that 91% rubbing alcohol and a fresh clean razor blade window scrapper lifts it off without scratching the screen. Hope this helps

 

[franlando]

Good luck finding anything that will come factory with "full adhesive" I have tried every type in the book short of the over priced white dome. I ended up finding a perfect solution (for me) though a 3D or 4D"d Temp glass protector as its advertised anyways... i think they're all pretty much the same at the point of "D" in the description but that being said they are only like 6 bucks a piece for a full cover option i opted for with out the whole top section cut out around the speakers and camera. They were only edged adhesive but the trick is to use the LOCA glue to adhere it to the phone... I am aware its for LCD screen repairs but if you get the 2500 viscosity its a lot thicker and it never fully cures even under a black light but it has the right amount of stickiness to stay on the phone seamlessly on my note 8 and have no popping or issues with input of the s pen, Its great! the corners dont lift even its on there good. Yes ive cracked and had to replace them before so i can vouch they are remove-able. I will add if they are on there a long time that around the bottom center where you usually touch the screen the most it can be a pain in the ass to get it separated.. Ive found that 91% rubbing alcohol and a fresh clean razor blade window scrapper lifts it off without scratching the screen. Hope this helps

Thanks for sharing the info, but do you mind posting a link?

 

[Liftkit]

Thanks for sharing the info, but do you mind posting a link?

Yeah sorry here they are..........

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/332744157134

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/271328437299

 

[sandeepkumar0153]

Look for the one which comes with UV light and UV activated adhesive.
There is plain glass with back side laminated sheet which needs to be peeled off. A UV activated glue that is liquid and needs to go on the screen over which the glass is placed.
Then its all like spreading butter between toasts. You must apply little pressure so it spreads over entire screen then use the UV light to harden it.

Its the best i have found yet after nearly 10 screen protector. It need expertise and is not for the faint of heart. Good luck

 

[Liftkit]

Look for the one which comes with UV light and UV activated adhesive.
There is plain glass with back side laminated sheet which needs to be peeled off. A UV activated glue that is liquid and needs to go on the screen over which the glass is placed.
Then its all like spreading butter between toasts. You must apply little pressure so it spreads over entire screen then use the UV light to harden it.

Its the best i have found yet after nearly 10 screen protector. It need expertise and is not for the faint of heart. Good luck

I would have to say shy away from applying pressure as it pushes the glue out of areas causing an uneven layer of glue & possibly bubbles. If you put a 50 cent size globon one end of it and tip the phone towards the opposing end it will run down the phone and as your doing that you just let the screen protector drop onto the glue ever so slightly from one end to the other and just let it spread it will eventually spread every time if you use enough glue.... cover up your speakers with tape. Just my Insite an experience with using pressure and not using pressure. Otherwise good advice

 

[sandeepkumar0153]

I would have to say shy away from applying pressure as it pushes the glue out of areas causing an uneven layer of glue & possibly bubbles. If you put a Big Blob on one end of it and tip the phone towards the opposing and it will run down the phone and as you doing that you just let the screen protector drop onto the glue ever so slightly from one end to the other and just let it spread it will eventually spread every time if you use enough glue. Just my Insite an experience with using pressure and not using pressure. Otherwise good advice

Nice, i faced issue when i dropped glue and put on the screen guard. It never went till the corners, even after adding more glue in second attempt. So i pressed a little and it went all the way to the edges.
Maybe im dropping glue in centre. I will try your method of starting from corner next time. Thanks :good:

 

[franlando]

Yeah sorry here they are..........

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/332744157134

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/271328437299

Out of curiosity can you take a picture of it after installation? Because those black edge lines make me skeptical.

 

[Liftkit]

Out of curiosity can you take a picture of it after installation? Because those black edge lines make me skeptical.

Skeptical of what?

 

[petzku]

i use this and i am very happy..!
it is a uv glue tempered glass like whitestone but a lot cheaper. (i have used whitestone doom in the past and i put them in the same quality)
https://www.ebay.co.uk/itm/For-Sams...d7cc3eb20:m:mORLJDIrICxslUiTcMTsP8A:rk:2:pf:0

I got mine today. The setup was easy. Lest see how this holds up. Im very happy with this product, the best that I've tried so far.

Everyone should really get this instead of the whitestone!

 

[ler01]

Yeah sorry here they are..........

Do you use cases? Maybe you have alcantara and protective standing? Does this custom glued screen protector have any issues applying cases? Thanx
I don't like screen protectors but I saw prices for screen replacement in services - it's just crazy.

 

[Liftkit]

Do you use cases? Maybe you have alcantara and protective standing? Does this custom glued screen protector have any issues applying cases? Thanx
I don't like screen protectors but I saw prices for screen replacement in services - it's just crazy.

If you use certain cases yes they will have issues, actually at least half of the ones Ive tried have caused the protector to lift. Also the glue that i use is not made for screen protectors, its for LCD screens replacements. THat being said its just 2500 LOCA glue. You MUST buy the 2500 or higher cuz anything lower in viscosity will make it near impossible to remove when it comes time to change out the screen proector

---------- Post added at 11:16 PM ---------- Previous post was at 11:12 PM ----------

Do you use cases? Maybe you have alcantara and protective standing? Does this custom glued screen protector have any issues applying cases? Thanx
I don't like screen protectors but I saw prices for screen replacement in services - it's just crazy.

If you use certain cases yes they will have issues, actually at least half of the ones Ive tried have caused the protector to lift. Also the glue that i use is not made for screen protectors, its for LCD screens replacements. THat being said its just 2500 LOCA glue. You MUST buy the 2500 or higher cuz anything lower in viscosity will make it near impossible to remove when it comes time to change out the screen protector. Also the one case that i highly recommend for a glass screen protector and over all proection and looks, feel the whole 9 yards is the POETIC brand case Its perfect in eery way IMO.

 

[TheMadScientist]

If you use certain cases yes they will have issues, actually at least half of the ones Ive tried have caused the protector to lift. Also the glue that i use is not made for screen protectors, its for LCD screens replacements. THat being said its just 2500 LOCA glue. You MUST buy the 2500 or higher cuz anything lower in viscosity will make it near impossible to remove when it comes time to change out the screen proector

---------- Post added at 11:16 PM ---------- Previous post was at 11:12 PM ----------



If you use certain cases yes they will have issues, actually at least half of the ones Ive tried have caused the protector to lift. Also the glue that i use is not made for screen protectors, its for LCD screens replacements. THat being said its just 2500 LOCA glue. You MUST buy the 2500 or higher cuz anything lower in viscosity will make it near impossible to remove when it comes time to change out the screen protector. Also the one case that i highly recommend for a glass screen protector and over all proection and looks, feel the whole 9 yards is the POETIC brand case Its perfect in eery way IMO.

I will second this. It can be a pain to remove some of the loca at times