everything works for me after the update to v312 ,but I always have to restart my phone after the update to have a signal. Try it.
LOSQ/LiR - LineageOS 17.1/18.1-UNOFFICIAL-GSI
- Thread starter -Alf-
- Start date
It's fine it's fixed now.
Turns out it was the carrier that was being problematic
. I feel so frustrated I wasted my time for no reason lol.
really stupid coincidence...It's fine it's fixed now.
Turns out it was the carrier that was being problematic
both ROMs are AOSP based on 'phhusson' sources, there is little, if any, difference between the two...
How does this ROM compare to official lineage 16.0? Are there any major bugs in either? How do they compare in regards to battery life and overall performance?
Sorry if i missed something, but does NFC work whith this version?
Or do i need to use the NFC_Patch?
Yes, on all builds and versions of GSI ROMs (AFAIK).
Edit: If you just upgrade to a newer version of Lir, the NFC will remain from the previous version.
Last edited:
Thx
One last thing.. can i turn off encryption with the script from LineageOS 16 thread? And is the correct order doing that, after i have intalled 18.1 and booted first time.
I don't know which script you mean, but this method works on EMUI 9.1 & GSI ROMsThx
One last thing.. can i turn off encryption with the script from LineageOS 16 thread? And is the correct order doing that, after i have intalled 18.1 and booted first time.
https://xdaforums.com/t/data-decryption-on-emui-9-1.4319329/post-85478865
IMO flash Lir + NFC + script , then do a factory reset, but it's your choice. The only difference is the number of factory resets.
Last edited:
You have to do a reboot manually , click OK in the pop up , the phone will shut down, then use Power + Vol Up. It should work.
Didn't faced a problem like this...
Try Magisk-v22 + Manager-22
https://mega.nz/file/9tskybJD#JdxlT1NO0EKMGClVEaPxCGWCZ9AJCs_hLoap4vljYng
https://mega.nz/file/F8lGiZDZ#1DeGGcxlgeM08n5g5CsmhoKoYZuOEDJQu_1yeHWX9oY
Make sure that ‘Stable’ is selected as Magisk’s update channel.
Or, try guide for A11
Look here
The magisk application was updated to 23.0 to fix it normally, thanks!
Does Lir have the signature spoofing patches for microg by any chance. I would like to use it without full GAPPS and the patchers for R currently require magisk-hacks to work, which would cost me some security.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
10For those who want to try LineageOS 17.1/18.1-UNOFFICIAL-GSI . IMO stable enough to be used as your daily driver.
LOSQ/LiR is not developed nor maintained by me!
Credits: @eremitein
Requirements: basically full stock EMUI 9.1, with stock recovery_ramdisk.
Note: I prefer to install in fastboot mode, it's quick, easy and most importantly, safe.
IMPORTANT! Before booting up the ROM, you will need to perform a factory reset in stock recovery!
Install arm64-b.. only!
1. LOSQ - LineageOS 17.1-[10]-unofficial-GSI
with the GAPPS
GAPPS
without GAPPS
Vanilla
-----------------------
LiR- LineageOS 18.1-unofficial-[11]-GSI
Download
2. Extract the ROM .img file from the compressed file.
3. Flash extracted losq/lir... .img from fastboot , use command
fastboot flash system (file_name).img
4. Run command fastboot reboot, unplug your phone, when appears on screen yellow warning, press and hold for 3 sec Volume Up . In eRecovery select 'Wipe data/factory reset'.Reboot .
NFC patch:
https://xdaforums.com/t/losq-lineageos-17-1-unofficial-gsi.4219291/post-84394147
Magisk root (23.0):
(Note: If you don't plan to use TWRP, simply install patched Recovery_ramdisk in fastboot mode. Run command
fastboot flash recovery_ramdisk magisk_patched-23.img ),
- download and install Magisk manager-23.apk:
https://mega.nz/file/go0m2RiR#M5UTv6FPjWPtDaGPr-u2tpJMCwdf8uwnniZg69LiGfw
- Install TWRP-9.1
https://mega.nz/#!tkcTlATI!A8UJGPBGtxJbLcUOJoxCGJj5PFZXzCnjbb3OkwqKTP8
over eRecovery (it's necessary on EMUI 9.1):
- copy TWRP file to the SD card, and also copy to the SD card patched Recovery_ramdisk:
https://mega.nz/file/lp1kHLxJ#htCMaPjSsg_dy0w_jNOft-t_DZRAPwhOvwy_Wr2cjX8
- flash TWRP - run command
fastboot flash recovery_ramdisk (TWRP's_name).img
- boot into TWRP, select storage - SD Card, select "Install image", find TWRP-9.1.img file and mark eRecovery, swipe. Go back, find magisk_patched-23.img file, mark Recovery, swipe. Go back to the TWRP's main menu, select Reboot > Recovery. Done.
Note: you then need to boot your phone every time via Recovery. It'll boot into android as normal but with root.
( Note: for those who want keep the erecovery as a fail-safe:
https://xdaforums.com/t/...-erecovery-with-twrp-installed-on-it.4357127/ )
To remove Magisk reinstall stock recovery_ramdisk via TWRP or fastboot , download Here
How to boot into TWRP:
- Turn off your phone, connect to the PC (or charger), then press and hold Power + Volume Up, device will reboot into eRecovery (= TWRP).
How to boot into patched Recovery :
- Restart your phone, when appears the yellow warning on the screen, press and hold Volume Up for ~ 2 sec,
release the button and immediately press and hold again for ~ 2 sec. Repeat it 6-7 times, the device will reboot into Stock Recovery (you can perform Wipe cache or Factory reset).
ROOT WITH SUPERUSER:
1. In TWRP flash Zip.file
2. Install Phh Superuser apk .(if needed) https://mega.nz/file/A4sWFYxZ#9KMkvKRgzU7oCvgThPFQOpv_wKAnLZcZVWcJ03HDyNE
Tips:
https://xdaforums.com/t/treble-gsi-favorite-gallery-camera-and-file-manager.4246019/3
Hello, maybe I found how to fix GPS (I'm running Lir again ).
I tried replace some files with default extracted from stock, and it worked .
- Download files:
1
2
3
- Go root/system/etc
- Replace gps.debug.conf with downloaded gps.debug.conf file
- Copy to system/etc also second file gps.debug
- Open system/etc/permissions and copy here android.hardware.location.gps.xml file.
Restart.
2
I use it for about a week as daily driver.
I think it's a lot smoother in daily handling than stock ( I use it with nova launcher). After some tweaking every thing I need is working:
- I get full safety net with magisk and hide props plugin. I also use systemless host. I do not see netflix in playstore, but I could install the app from apkmirror and start it . I don't have an account, so I can't tell if it really works.
- NFC fix is installed and works. To use it with the german ausweisApp I had to install xposed and nfc extended module. My finding was, that enabled xposed kills safetynet status, so it's not active until I need it.
- The german bank app dkb tan2go has a very aggressive root detection, it works while magisk is frozen (with titanium).
- All other banking apps I tried did work with magisk hide (I don't use garmin pay with my watch, so I did not try google pay)
- Switching audio after inserting / releasing wired headsets does work.
- Fast charging works (did not try offline charging, I just switch my phone to flight mode if I don't use it)
- Bluetooth is sometimes a bit buggy: Headphones disconnect after starting to play audio - but this happens only for 1- 4 times, then the connection is stable. This affects different receiver, so I think it's a problem with the rom / the phone.
- Signal meter for mobile radio does not work, but you can use apps/widgets from play store to show signal strength
