[LP 5.0.2 Kernel 3.4.113][08 JAN] Dorimanx 12.0 LG G2 D800/1/2/5 LS/VS980
- Thread starter dorimanx
- Start date
No idea, i have OP3T. And G6 will rule and forgotten till i will need to look for new device
Sent from my ONEPLUS A3010 using XDA-Developers Legacy app
If you are looking for a new phone you should be looking at the OnePlus 3T, because guess who is there
Having dorimamx at the op3t forums is like having messi in barcelona or Cristiano ronaldo in Real madrid.
He's one of the reasons why I will get the op3t
He's one of the reasons why I will get the op3t
Hi, last time I found my D802 in weird state. It was displaying boot animation in loop for long time, so I had to force reset by pressing power button which is last recorded action in log. Please have a look what happened in attached last kmsg log. Was it a freeze or restart?
I'm confused
So... I have D802 version and plan to upgrade to Lollipop 5.02, but I am so confused about installing this kernel. I don't know what bootloader is and google is not helping. I just know that it boots kernel, but It's much complicated I believe.
What I want?
- To install LP and then flash dorimanx latest kernel. That is it.
Why complicate things with bootloaders?
How do I check which bootloader version I have and does it even matter if I'm on stock LP 5.02?
I have a feeling that with stock OS I could just instal this kernel and also that bootloader is just for people with some other Android OS like Cyanogenmod or similar but on the same Android Version (5.02).
Am I right or wrong? If wrong, where am I wrong?
What will happen if I install kernel 10.9 for kitkat and then upgrade android to 5.02 with lg update tool (windows program)?
Dont skip questions, because I will have to write them again and that is not fun
PS. I tried downloading kernel for 4.4.2 android before changing my mind to upgrade to stock LP via lg tool. LP kernel cant be downloaded either. Download stops before 10mb are downloaded and it happened more than ten times now. Yes, 10 times! Ofc I'm trying to download from http://www.dorimanx.com/LG/ and http://www.dorimanx.com/LG-LP/
So... I have D802 version and plan to upgrade to Lollipop 5.02, but I am so confused about installing this kernel. I don't know what bootloader is and google is not helping. I just know that it boots kernel, but It's much complicated I believe.
What I want?
- To install LP and then flash dorimanx latest kernel. That is it.
Why complicate things with bootloaders?
How do I check which bootloader version I have and does it even matter if I'm on stock LP 5.02?
I have a feeling that with stock OS I could just instal this kernel and also that bootloader is just for people with some other Android OS like Cyanogenmod or similar but on the same Android Version (5.02).
Am I right or wrong? If wrong, where am I wrong?
What will happen if I install kernel 10.9 for kitkat and then upgrade android to 5.02 with lg update tool (windows program)?
Dont skip questions, because I will have to write them again and that is not fun
PS. I tried downloading kernel for 4.4.2 android before changing my mind to upgrade to stock LP via lg tool. LP kernel cant be downloaded either. Download stops before 10mb are downloaded and it happened more than ten times now. Yes, 10 times! Ofc I'm trying to download from http://www.dorimanx.com/LG/ and http://www.dorimanx.com/LG-LP/
Last edited:
I was able to download kernal from both links you provided. Maybe the problem is in the stock browser. Anyway, once you are on stock LP, (and after you have rooted and installed recovery) all you have to do is install Dorimanx for your correct version. No need to worry about bootloaders or anything. Ad you surmised, that is only when changing from specific OS.
Stuck on boot logo when turned on selinux to permissive mode in dorimanx app. I m on cloudy g3 with dorimanx 12.0.plzz help
Go to recovery with button combination and flash dorimanx's kernel again. Then you can try change SElinux with one of blastagator's SElinux enablers from his website:
http://www.gregtwallace.com/lgg2-projects/miscellaneous/
Sent from my LG-D802 using XDA-Developers Legacy app
Yea already did and got it fixed by flashing older version than reboot and recovery and again flashed newer version and reboot. Still thanx for the help bro
LP dorimanx Kernel VS KitKat dorimanx Kernel
1. I have another question. Can I normally upgrade to LP 5.02 stock with lgmobilesupport tool if I have previously installed dorimanx 10.8 kernel?
2. How good is the battery life on stock LP with dorimanx kernel compared to kitkat 4.4.2 with dorimanx kernel 10.8 and which kernel version is the best one?
3. I noticed double tap on the screen while it's off doesn't turn the screen on after flashing kernel. Is this normal? and if not, how can it be fixed?
I'm thinking of upgrading to LP since there is dorimanx kernel for it. On kitkat battery is 3x better after flashing, so I expect similar performance difference compared to stock LP kernel. First I need to check with you guys
1. I have another question. Can I normally upgrade to LP 5.02 stock with lgmobilesupport tool if I have previously installed dorimanx 10.8 kernel?
2. How good is the battery life on stock LP with dorimanx kernel compared to kitkat 4.4.2 with dorimanx kernel 10.8 and which kernel version is the best one?
3. I noticed double tap on the screen while it's off doesn't turn the screen on after flashing kernel. Is this normal? and if not, how can it be fixed?
I'm thinking of upgrading to LP since there is dorimanx kernel for it. On kitkat battery is 3x better after flashing, so I expect similar performance difference compared to stock LP kernel. First I need to check with you guys
1. I have another question. Can I normally upgrade to LP 5.02 stock with lgmobilesupport tool if I have previously installed dorimanx 10.8 kernel?
2. How good is the battery life on stock LP with dorimanx kernel compared to kitkat 4.4.2 with dorimanx kernel 10.8 and which kernel version is the best one?
3. I noticed double tap on the screen while it's off doesn't turn the screen on after flashing kernel. Is this normal? and if not, how can it be fixed?
I'm thinking of upgrading to LP since there is dorimanx kernel for it. On kitkat battery is 3x better after flashing, so I expect similar performance difference compared to stock LP kernel. First I need to check with you guys
Flash cloudyG2 v3.3 rom + dorimanx 12.0.I m on lp since a year. Very Stable.. Good battery life and awesome performance
---------- Post added at 07:01 PM ---------- Previous post was at 06:59 PM ----------
1. I have another question. Can I normally upgrade to LP 5.02 stock with lgmobilesupport tool if I have previously installed dorimanx 10.8 kernel?
2. How good is the battery life on stock LP with dorimanx kernel compared to kitkat 4.4.2 with dorimanx kernel 10.8 and which kernel version is the best one?
3. I noticed double tap on the screen while it's off doesn't turn the screen on after flashing kernel. Is this normal? and if not, how can it be fixed?
I'm thinking of upgrading to LP since there is dorimanx kernel for it. On kitkat battery is 3x better after flashing, so I expect similar performance difference compared to stock LP kernel. First I need to check with you guys
Double tap works great and never got any issues using lg knock on while screen is off
---------- Post added at 07:09 PM ---------- Previous post was at 07:01 PM ----------
1. I have another question. Can I normally upgrade to LP 5.02 stock with lgmobilesupport tool if I have previously installed dorimanx 10.8 kernel?
2. How good is the battery life on stock LP with dorimanx kernel compared to kitkat 4.4.2 with dorimanx kernel 10.8 and which kernel version is the best one?
3. I noticed double tap on the screen while it's off doesn't turn the screen on after flashing kernel. Is this normal? and if not, how can it be fixed?
I'm thinking of upgrading to LP since there is dorimanx kernel for it. On kitkat battery is 3x better after flashing, so I expect similar performance difference compared to stock LP kernel. First I need to check with you guys
In dorimanx app i m using extreme battery profile. Still it doesn't lag!!! I can multitask and play games like 8 ball pool... Mini militia with good battery life...
I think u should backup your current system and flash lp and check out
@dorimanx : my phone is crashing or rebooting at least once a day... could you have a look at why?
you will find attached my kernel debug zip generated just after a reboot
Thanks! http://cloud.tapatalk.com/s/59139048ebb81/dorimanx_debug-V12.0.zip
you will find attached my kernel debug zip generated just after a reboot
Thanks! http://cloud.tapatalk.com/s/59139048ebb81/dorimanx_debug-V12.0.zip
Well its not for all the rest, so no matter what it is, it not kernel.
And i will not change anything.
Project is closed.
Kernel log show warnings in video decoder driver that used with camera and playing videos.
But that should not crash kernel.
Try to use default profile without changes!
You changed power modes, and best not to...
Last edited:
sunmughans
Senior Member
Not is posible, you must upgrade to Android 5.0
Enviado desde mi LG-D800 mediante Tapatalk
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
307
Dorimanx LG G2 Kernel for STOCK 5.0.2 Branches!
NO KITKAT 4.4.2 SUPPORT!!! GO AWAY NOW!
Can be used Only for:
D800 Model!
D801 Model!
D802/5/6 Model!
LS980 Model!
VS980 Model!
STWEAKS == DORIMANX APP! there is NO more STweaks!
My PM box, is for Emergency ONLY! do not send me PM's just because you cant post! that is lame, post something useful and post in thread.
IF you need answers to QUESTIONS not belong to Development???
GO HERE! Q&A THREAD!
OR THIS GREAT INFO THREAD!http://forum.xda-developers.com/lg-g2/help/test-t3032171/post58880406
My kernel was based on LG G2 Stock Kernel 30B.
Kernel Tree is 3.4.113, + LG LP updates + my tweaks and lots of tuning!
Global Credits!
Savoca for many kernel mods
Cyanogen ([email protected]) for many kernel mods
Faux123 for UV/OV, Sound Gain Control, Inteli Hotplug, Fast Charge support! and more!
Alucard_24 for Alucard Hotplug and mods.
LG for Stock kernel base!
MyFluxi for kernel updates and fixes.
To all my sources in GITHUB!
Linus Torvalds for Linux source!
WHAT INSIDE:
- Default I/O Scheduling: ZEN.
- More I/O Scheduling present in kernel: ROW, FIOPS DEADLINE, NOOP, CFQ, SIO, BFQ.
- Default CPU frequency: 300Mhz-2.26GHz (MAX OC up to 2.8Ghz speed!).
- You can set MIN/MAX CPU Freq in Dorimanx App.
- You can set MAX freq for screen OFF state!
- Default CPU governor: Ondemand.
- More CPU Govs present, conservative, performance, Intelidemand, Intellimm, Interactive, Nightmare, Hyper, Pegasusq, IntelliActive, Alucard, Darkness, Impulse, YankActive.
- Support for Kernel HOTPLUG (Intelli HotPlug by @faux123)
- Support for Kernel HOTPLUG (Alucard HotPlug by @alucard_24)
- Support for Kernel HOTPLUG (MSM HotPlug by @myfluxi)
- Support for Kernel HOTPLUG ThunderPlug
- Support for Kernel HOTPLUG AutoSMP
- Support Inteli CPU Temp control (by @faux123)
- Support for Touch BOOST CPU'S code (by @alucard_24)
- Support for Async CPU, every core can have it's own min/max + cpu governor! (by @alucard_24)
- Support 4 GPU Govs! + Tuning in Dorimanx App. (by @myfluxi)
- Support limit OC to 2.5Ghz / 2.7Ghz / 2.8Ghz (by @faux123)
- Support undervolt/overvolting via sysfs interface/apps interface (by @faux123).
- Debugging is OFF by Default to save CPU cycles, and extend battery life.
- Internal kernel function fixes (ie, memory leaks, scheduler fixes).
- High performance, low latency kernel.
- Compiled with -O2 flags and hardware neon-vfpv4 FPU enabled.
- Built from official LG 30B kernel source.
- File systems support: Ext2/3/4, FAT32, CIFS, USB OTG.
- Support F2FS filesystem! code updated up to 4.9.x backported for 3.10.y FS
- Auto F2FS Mount on boot for /system /data /cache if formatted as F2FS you need Blastogator TWRP Recovery for this!.
- EXFAT, NTFS supported but need USB OTG APP! it's not native!
- Sound Driver Control or via Dorimanx APP or via Faux Sound App.
- Dorimanx Kernel Control App will be installed with kernel.
- Busybox 1.27.0 will be installed in ROM on BOOT. including all needed applets, compiled with GCC 6.2.0 by me.
- Synapse Kernel Control/Status App will be installed with kernel.
- Allowed forced fast charge! hack.
- Sweep2Sleep! allow sweeping from right to left and backwards! on soft buttons to turn off the screen.
- Kernel created using GCC 6.2.0 compiled by me, powerful ToolChain + all needed mods for it.
- Running Scripts from /system/etc/init.d/ is SUPPORTED but OFF in Dorimanx App! if you need it, enable.
- Added UltraSound high performance audio hardware support.
- Added support for MultiROM kexec-hardboot! (by patrik.KT) (disabled! cant be used for now. no bootloader support!)
- Added support for relaxed CPU idle functions to save power.
- Added GPU OC/UC to Max 650Mhz Min 100Mhz (by @neobuddy89)
- Added support for KK BootLoader! "BUMPED" kernel (by @Cybojenix && @Thecubed)
- Advanced Color interface + App (color control) (by @savoca)
- Support using phone as keyboard and mouse for PC over USB! (by @pelya)
need APP USB Keyboard! also to enable USB keyboard in Dorimanx App. - Added UKSM driver to allow apps to share same RAM, and by this free global RAM for other things.
- Added LCD State Notifier to signal different drivers in kernel to suspend when screen is OFF and 10sec passed.
- Added ZRAM virtual swap with LZ4 merged from 4.6.y kernel. to extend memory pool by 25% using multiple concurrent compressors.
- Added ZSMALLOC driver from 4.6.y kernel to support memory fast allocation and swap control.
- Merged 98% of all the memory code from 3.10.y android kernel, and some parts from 3.12.y kernel. to fight with LP RAM leaks!
- Merged 98% of all cpu sched core code from 3.10.y android kernel, and some parts from 3.16.y kernel.
- Merged 98% of all FS and BLOCK code from 3.10.y android kernel.
- Merged 99% of all SCSI active drivers from 3.10.y android kernel.
- Set internal kernel clock to 300HZ.
STILL NOT SUPPORTED!
- DATA ENCRYPTION! DO NOT ENCRYPT!!!! use STOCK KERNEL for encryption if you need it.
Known BUGS!
Post reports, i will fix.
Standard disclaimer:
By installing this kernel YOU will take full responsibility for any damage to your device!
Hardware or software! no one forcing you to install it.
So please do not blame me if you read wrong! or didn't read at all the instructions that i have written for YOU.
But you can feel SAFE to use it, as I test every release on my phone!
Before I publish it for download.
Your warranty will be void by installing custom kernel as my.
This kernel CAN ROOT ADB Shell!
Global Info About LG Models:
D800 = AT&T Model
D801 = US Tmobile Model
D802 = International Model
D803 = Canada Model
F320* = Korean Model
D805 + D806 (same as D802)
LS980 = SPR Model (Sprint)
VS980 = VZW Model (Verizon)
L01F = Korean D802 model that missing some parts to reduce cost.
Kernel Sources:
KERNEL GITHUB
RAMDISK GITHUB
TO DOWNLOAD GO DOWN!!! YES MORE DOWN...(do i need to repeat?)
How To Install:
Before you install, Change system settings to list view!
or settings will FC after install, strange bug when Selinux is set Permissive.
open settings long press on recent and select list view.
You will need to have ROOTED device with Recovery installed!
YOU MUST HAVE LAST KK BOOTLOADER INSTALLED!!! FOR YOUR MODEL! OR YOU WILL STUCK ON BOOT!
Refer to other threads for recovery install process and for bootloader install.
You can download TWRP Recovery HERE: Recovery Mirror
YOU NEED KK BOOTLOADER 20A and UP best to have 20H for D802!!! other models find what was last one version!
Download kernel, upload it to your SDCARD, anywhere.
Always have STOCK Kernel for your device!
so you will always have it on sdcard in case of any disaster!!!
Reboot to Recovery.
THINK AGAIN! did you made backup? NO!!!! DO IT NOW!
DO YOU HAVE LATEST KK BOOTLOADER? NO IDEA!!!!! DO NOT INSTALL! go search for it.
IF ABOVE is OK! proceed.
Install kernel as you installed ROM or any mod.
Reboot!
In case that you stuck on boot logo and want to revert to STOCK kernel.
BOOTLOADER 20A!
Connect USB Push PWR + Vol Down till phone reboot and you will see LG Logo!
Release and press the buttons again! till you see screen asking if you want to WIPE your device!
if you have recovery installed, then it's will just OPEN the recovery! no WIPE will happen!!!
Just push 3 time the PWR key. and you will be moved to recovery.
Install your device STOCK kernel and wait for FIX.
BOOTLOADER 20H!
To enter recovery from LG logo now have different button combo!!!
Power OFF by holding long the power button till black screen!
Press and hold power and volume down until you see the LG logo then release and press and hold the volume up and volume down buttons until reset screen appears.
it's will ask SCARY QUESTIONS!!!! if you want to hard reset your device!!!
SAY YES/YES!!!! 2 times, then its will show LG logo and boot your custom recovery! in this case the bumped TWRP.
If you have STOCK Recovery!!!! it's will WIPE your device...
Have Fun and report.
INFO FOR USER!!! READ ME FIRST:
*About force fast charge. not all devices/models support that HACK.
so if it's not working for you and you are using DEFAULT profile in Dorimanx App.
Then it's NOT WORKING FOR YOU. no need to complain. it's HACK. not LG feature.
Donation Board:
- ME donated 600+ hours to update stock to now.
- Rune K. Serious Donation!
- Diechel X7 Serious Donation!
- Robert W. Serious Donation!
- Krija + Dorimanx App updates! (Serious Donation!)
- Iko11 X3
- [email protected] X3
- Siggey X2
- Marek_poland X2
- Vitali T. X2 (guest)
- Ati75
- Lycidias
- Jamesd1085
- Floodland
- Minotavros
- Beggar23
- Bromoxitos
- **** Gordon
- Ribou
- Remorema
- RyperX
- Gozzaa
- F_4Strings
- Alexr71
- Samuele94
- Wimmme
- Brahialis
- 4r44444
- TMG1961
- AlexVipXDA
- 60nine
- Joeben1
- Gabrech
- Straylight23
- Urushiol
- Thevinh.btr
- MrN1484
- Asalvi0
- Luq529
- LeoPosas
- Blastagator
- Stroge
- MrN1484
- 5nickers
- OT-Xtreme
- Harkis123
- Kobredabre
- Lynxrz
- AlexOB1
- Krizko1979
- Edgd1er
- Sucky1983
- StructureDr
- vPro97
- Solnyshok
- Stormbringer83
- Avram S. (guest)
- Jerzy G. (guest)
- Massimo C. (guest)
- Alejandro V. M. (guest)
- Diogo J. (guest)
- Florian N. (guest)
- Michael N. (guest)
- Didier V. (guest)
- NURİ A. (guest)
- Alister C.B (guest)
First banners (user/Contributor) made by @coowkeee
Contributor banner is for people that feel they really made a contribution to any of my kernels!
You can use Power USER banner if you wish
Mirror #1 by willflint
Mirror #2 by GITHUB!
Info for Web Hackers,
in my mirrors, there is nothing to take!
My work is public and for the people!
Please let my mirrors work in peace.
Thanks.
For kernel Install, Best to use OTA APP by @Diechel
Get it in Google Play
Change logs:
08/1/17
Kernel 12.0 STABLE Final Build.
*Updates to Dorimanx App by @krija big Thanks for that!
*Merged updates to NET,FS code.
*Created kernel with 6.2.0 GCC with latest libs tuned for our CPU.
*Merged new updates to busybox now it's 1.27.0 build with today changes.
Restored few options to fix CRON and other scripts that kernel use on boot.
19/12/16
Kernel 11.9
*Allowed modem to go to deepsleep when there is no data traffic.
User can control the modem state via dorimanx app. (see TWEAKS TAB)
when modem is in sleep state, it's may delay incoming notifications,
as whatsup and push mails over data connection. but will save standby power!
if it's critical to get all notifications on time, then switch to awake mode.
Kernel modem driver was set in awake mode in last 10 kernel builds!
Delay can be from 5 to 30sec, but power usage is from -10mA/h~25mA/h(sleeping) to -35mA/h~-60mA/h (Awake)
*Merged updates to ZRAM driver from main line kernel.
*Merged fix for NET code.
*Merged updates to File System code from CM14.1
*Updated EXFAT driver from my source.
*Merged huge update to F2FS driver from 3.18.y kernel. many fixes for SYNC code that was broken before.
*User profile will be RESET on first boot.
28/11/16
Kernel 11.8
*Fixed broken FS SYNC for F2FS driver.
*Merged fix for BFQ I/O driver.
*Added F2FS to ASYNC_FSYNC code.
*Merged fixes to DSYNC/O_SYNC AIO.
*Merged massive update to android binder driver from google kernel source.
This driver is main driving power or all applications and memory allocations.
ROM and APPS getting speed boost when running, see GIT for tech dev info.
23/11/16
Kernel 11.7 (BUG in F2FS driver)
*Merged fix for speaker volume control using faux sound app, when returning from mute to sound state.
*Merged few changes for F2FS from 3.18.y that are missing in 3.10.y source!
Driver should be stable again, for using it on critical partitions.
*Merged fix for memory allocation for touch driver and missing null terminator char.
*Merged fix for Low Memory Killer that will account memory that cant be free to have more accurate
free/used ram readings when driver needs to free ram for something else.
*Merged fix for double-free when drives detach during SG_IO and fix Audit driver.
*Merged latest fixes for busybox and compiled it with gcc 6.1.0 for us.
02/11/16
Kernel 11.6 (BUG in F2FS driver)
*Merged updates to BINDER driver from main line.
*Merged fixes for ARM code
*Merged updates to sound driver code. (no sound output changes, just bug fixes)
*Merged updates to memory code and ram leaks fixes.
*Merged updates to F2FS driver from 3.10.y stable tree including all changes up to main line kernel 4.9-rc3
*Merged 3.4.113 last kernel patch that included many fixes to NET,ARM,FS,TIMERS,MM
*Merged fix for screen panel that will reduce screen shatter during app transitions for all models.
This fix existed only for D802 till now.
*Merged cleanup for MMC driver.
*Merged ram leak fix for touch screen driver.
*Updated busybox with latest patches from source.
28/09/16
Kernel 11.5 STABLE
*Merged code changes to RMNET,NET,SOUND,CRYPTO,ARM,AUDIT,TTY,HID,BLOCK,QSEECOM,DMA,SMP2P2,KGSL,QCEDEV
*Updated kernel GCC builder to latest 6.1.0 build + all needed fixes found during kernel build.
*Updated busybox with all latest code changes from source.
06/09/16
Kernel 11.4 BETA
*Merged fixes for NET,ASHMEM,SOUND,FS,BT,USB,BLOCK,PROC code from CAF (kernel 3.10.y + 3.14.y)
*Updated GCC Kernel builder to 5.4.0 latest edition.
*Merged update to Dorimanx App by @Krija
*Updated Busybox with latest updates from source.
08/08/16
Kernel 11.3 STABLE
*Merged update to ZSMALLOC from 4.8 kernel.
Memory control improved.
*Merged updates for HID,NET,PPP,USB,Sound drivers.
14/07/16
Kernel 11.2 STABLE
*Merged updates for USB/NET/BT from CM13 and CAF sources.
*Merged updates to sound driver for stability.
*Changed Modem driver power save state to allow suspend in low level connections as G/Egde (2g)
has no effect on high level connections, as H/H+/4G. pwr drain is NORMAL in limits, and allow steady link in suspend.
for notifications/mails/other.
114One post for me!
GOOD INFO FOR LP ROM / KERNEL!
To use LP ROM with exposed framework you need to install latest arm 21 v75 or newer exposed framework
And exposed apk latest provided at XDA exposed for LP thread.
===================================================================================================
In order to get Viper4Android working with LP ROM:
download from my storage version 2.3.4.0 (http://www.dorimanx.com/LG-LP) it's ORIGINAL APK, no changes.
toss it to /system/priv-app/ using any ROOT file manager.
set 0644 permissions on file.
edit /system/build.prop
make sure to use GOOD editor that allow large file support!
last line should be:
ro.pip.gated=0 (or at least you must see it with editor! = good editor)
at the end of the build.prop add:
# Viper4Android
tunnel.decode=false
lpa.use-stagefright=false
lpa.releaselock=false
lpa.decode=false
save, make sure perms are 0755 on file.
edit /system/etc/audio_policy.conf
delete or comment deep_buffer function! from: deep_buffer { BLA BLA BLA } (# = comment, ROM will ignore that line)
save, make sure perms are 0755 on file.Code:# deep_buffer { # sampling_rates 44100|48000 # channel_masks AUDIO_CHANNEL_OUT_STEREO # formats AUDIO_FORMAT_PCM_16_BIT # devices AUDIO_DEVICE_OUT_SPEAKER| [COLOR=Red](LONG LONG LINE!)[/COLOR] # flags AUDIO_OUTPUT_FLAG_DEEP_BUFFER # }
Reboot, you will see viper4android app, open and install driver after SU access..
Reboot!
now you have viper4android working89News Update!
Kernel 8.3
31/12/15
*Compressed kernel with better LZ4 compression.
*Fixed F2FS mount when Selinux enabled.
*Allowed better support for busybox functions when Selinux is enabled.
*Removed useless console drivers that never used.
*Changed kernel GCC optimization to increase performance.
*Merged updates to PROC FS code.
*Updated Busybox with latest updates and better GCC optimizations.
*Updated debug log script and Dori App XML descriptions + cleanups.
Happy new year to all!:good:
Enjoy.88News Update!
Kernel 12.0 possibly the final build! STABLE
08/01/17
*Updates to Dorimanx App by @krija big Thanks for that!
*Merged updates to NET,FS code.
*Created kernel with 6.2.0 GCC with latest libs tuned for our CPU.
*Merged new updates to busybox now it's 1.27.0 build with today changes.
Restored few options to fix CRON and other scripts that kernel use on boot.
Tested this build for 4+ days and it's rock stable for me.
Enjoy, and I hope this kernel will power LG G2 for the rest of it's days
Time for me to move on, i will get my OnePlus 3T 128GB till the end of this week.
It's was fun to work with LG, and with all my friends here, THANKS for support and belief in me.
See you all at OP3 section, in few weeks when i will be ready to start new project.
I will keep monitor this thread and QA for month or 2 and help if i can.
My device will service my father with 12.0 build.
I will not be able to make any major changes to kernel, as I will not be able to test them.
Any way, it's all great as is now.
Have fun87News Update!
Kernel 6.4
19/10/15
*Merged all changes (bug fixes and code optimizations) for ZRAM + ZSMALLOC + ZPOOL from 4.2.y main line kernel!
I was thinking if i can use the 3.10.y code, why not try to merge up to maximum that i can get from 4.2.y!
and it's took some time and few adaptations and manual relocations, and it's BOOTED! and works GREAT!
New driver is made by non humanoids! that's for sure
super complex and reprogrammed by 90%
*Fixed wrong compression set for ZRAM. now it's LZ4 as should be. was LZO (slower but stronger compression)
LZ4 is much faster but little less compression.
I have lightened a fire in size of liberty for the android world!
138 Developers (my followers) and there followers already know!
Many devs will take that code and adapt to there kernels. ZRAM FOR ALL
Enjoy
