Yesterday, I was running some apps (WeChat, Photo, etc) on my phone, but then my phone starts to lag, and suddenly restart by itself, and the following error appears after small NOKIA logo:
"ERROR: Unable to find a bootable option. Press any key to shutdown"
I've tried all possible solution I've found, which is:
1) Hard reset key combo: hold "volume down" until exclamation mark shown. (no exclamation mark shown for me)
2) Windows Device Recovery Tool
- it shown model phone is "Lumia phone" and Firmware version is unknown.
- When press install, it shown error once it starting to flash FFU, and show "Operation ended with failure. Software installation failed. Please try restarting your device, and try software installation again..."
3) Nokia Care Suite
- same as WDRT, when boot to flash mode, it shown error when the program try to flash FFU.
- FFU downloaded by WDRT, it shown error that said FFU is invalid
- FFU downloaded from http://lumiafirmware.com/ error message
4) "Unbrick Lumia without JTAG"
- THOR2 can't find connection on the following command
Error:
- can't "flash" vpl to phone
Error
5) Try to flash FFU with WPInternal
- Doesn't work for flashing FFU (Error shown when trying to flash, Error 0x1106: Security header validation failed)
- Somehow flashing separate partitions (EFIESP, MainOS, Data) works, but I've flash old ROM that I've backup doesn't work
- able to boot to mass storage mode, able to read, able to backup (don't know about write)
Please help me, I've tried all of these above and my phone still bricked :crying:
"ERROR: Unable to find a bootable option. Press any key to shutdown"
I've tried all possible solution I've found, which is:
1) Hard reset key combo: hold "volume down" until exclamation mark shown. (no exclamation mark shown for me)
2) Windows Device Recovery Tool
- it shown model phone is "Lumia phone" and Firmware version is unknown.
- When press install, it shown error once it starting to flash FFU, and show "Operation ended with failure. Software installation failed. Please try restarting your device, and try software installation again..."
3) Nokia Care Suite
- same as WDRT, when boot to flash mode, it shown error when the program try to flash FFU.
- FFU downloaded by WDRT, it shown error that said FFU is invalid
- FFU downloaded from http://lumiafirmware.com/ error message
Code:
DEV_REPORTED_ERROR_DURING_PROGRAMMING: 0x00030003
Exception:
Nokia.CareSuite.PlugIns.MurzimRecovery.RecoveryDialog.MurzimProgrammingException: DEV_REPORTED_ERROR_DURING_PROGRAMMING: 0x00030003
at Nokia.CareSuite.PlugIns.MurzimRecovery.RecoveryDialog.RecoveryDialogModel.Flash()
at Nokia.CareSuite.PlugIns.MurzimRecovery.RecoveryDialog.RecoveryDialogModel.<HandleDownloadVariantPackageCompleted>b__c(Object state)
- THOR2 can't find connection on the following command
Code:
thor2 -mode emergency -hexfile HEX.hex -mbnfile msimage.mbn -orig_gpt
Code:
Debugging enabled for emergency
Initiating emergency download
Operation took about 11.00 seconds.
THOR2_ERROR_CONNECTION_NOT_FOUND
THOR2 1.8.2.18 exited with error code 84000 (0x14820)
Code:
thor2.exe -mode vpl -maxtransfersizekb 1 -vplfile C:\ProgramData\Nokia\Packages\Products\rm-915\XXX.vpl
Code:
THOR2 1.8.2.18
Built for Windows @ 13:36:46 Jun 16 2015
Thor2 is running on Windows of version 6.2
thor2.exe -mode vpl -maxtransfersizekb 1 -vplfile C:\ProgramData\Microsoft\Packages\Products\RM-914\RM914_059S3J0_3058.50000.1425.0004_034.vpl
Process started Fri Sep 30 19:47:41 2016
Logging to file C:\Users\...\AppData\Local\Temp\thor2_win_20160930194741_ThreadId-4880.log
Parsing VPL file C:\ProgramData\Microsoft\Packages\Products\RM-914\RM914_059S3J0_3058.50000.1425.0004_034.vpl
Successfully parsed VPL
Flashing .ffu file RM914_3058.50000.1425.0004_RETAIL_apac_malaysia_307_04_441880_prd_signed.ffu (SW version 3058.50000.1425.0004)
Debugging enabled for uefiflash
Initiating FFU flash operation
WinUSB in use.
isDeviceInNcsdMode
isDeviceInNcsdMode is false
Device mode 6 Uefi mode
[THOR2_flash_state] Pre-programming operations
Disable timeouts
Get flashing parameters
Lumia Boot Manager detected
Check status of battery
State of charge 3, charging current 1
Warning: Battery level low. Charge battery to 10 % of max charge.
Protocol version 1.1 Implementation version 1.16
Detecting UEFI responder
HELLO success
Lumia Boot Manager detected
Check status of battery
State of charge 3, charging current 220
Warning: Battery level low. Charge battery to 10 % of max charge.
Protocol version 1.1 Implementation version 1.16
Booting to FlashApp
Reboot to FlashApp command sent successfully.
DetachFrom connection
Verifying that device is online
Device is online
Detecting UEFI responder
HELLO success
Lumia Flash detected
Protocol version 1.15 Implementation version 1.28
Disable timeouts
Get flashing parameters
Lumia Flash detected
Protocol version 1.15 Implementation version 1.28
Size of one transfer is 2363392
Size of buffer is 2359296
Number of eMMC sectors: 15269888
Platform ID of device: Nokia.MSM8227.P6036.1.2
Async protocol version: 01
Security info:
Platform secure boot disabled
Secure FFU disabled
JTAG eFuse blown
RDC not found
Authentication not done
UEFI secure boot enabled
SHK enabled
Device supports FFU protocols: 0019
[THOR2_flash_state] Device programming started
Using secure flash method
CoreProgrammer version 2015.06.10.001.
Start programming signed ffu file C:\ProgramData\Microsoft\Packages\Products\RM-914\RM914_3058.50000.1425.0004_RETAIL_apac_malaysia_307_04_441880_prd_signed.ffu
FfuReader version is 2015061501
Send FlashApp write parameter: 0x4d544f00
Perform handshake with UEFI...
Flash app: Protocol Version 1.15 Implementation Version 1.28
DevicePlatformInfo: Nokia.MSM8227.P6036.1.2
Unknown sub block detected. Skip...
Unknown sub block detected. Skip...
Supported protocol versions bitmap is 19
Secure FFU sync version 1 supported.
Secure FFU async version 1 supported.
Secure FFU async version 3 supported.
Get CID of the device...
Get EMMC size of the device...
Emmc size in sectors: 15269888
CID: Samsung, Size 7456 MB
Start charging...
Requested write param 0x43485247 is not supported by this flash app version.
Start charging... DONE. Status = 0
Unable to send ECHO REQ or ECHO REQ not supported
Get security Status...
Security Status:
Platform secure boot is disabled.
Secure eFUSE is disabled.
JTAG is disabled.
RDC is missing from the device.
Authentication is not done.
UEFI secure boot is enabled.
Secondary HW key exists.
Get ISSW Version...
Get ISSW Version, SKIPPED!
Get system memory size...
Size of system mem: 524288 KB
Read antitheft status...
Requested read param 0x41545250 is not supported by this flash app version.
Send backup to RAM req...
Clearing the backup GPT, startsector = 15269854
UEFI returned error: 4
Clear GPT has failed!
Operation took about 9.00 seconds.
Unknown error code.
THOR2 1.8.2.18 exited with error code 196611 (0x30003)
- Doesn't work for flashing FFU (Error shown when trying to flash, Error 0x1106: Security header validation failed)
- Somehow flashing separate partitions (EFIESP, MainOS, Data) works, but I've flash old ROM that I've backup doesn't work
- able to boot to mass storage mode, able to read, able to backup (don't know about write)
Please help me, I've tried all of these above and my phone still bricked :crying:
Last edited: