M110S Korean FIX !!!

Search This thread

reslan_912

Senior Member
Sep 18, 2010
120
34
chelyabinsk
M110S Soft Bricked Solution
Hey !! i decided to make this thread because i saw many people from different countries and forums complaining about Korean M110s !!!

First of all if you messed up your device and you tried to re-partition and different pit files and wanna revert to stock this is fix for you !!
i myself spent 5 hours online trying to figure out how to fix my device ! so if you got M110s and its converted to i9000 ,you tired flashing i9000 firmware and it fails and on sticker under battery its written :GT-i9000 and I9000GSMH (scam)

its not my work i found the solution in other site and i would like to thank the original person who did this ! and ill try to expand his work i know its frustrating !!

**********************************
Common problems :
1-No Network
2-Home button is not working
3-UNkown baseband
4-No IMEI
5-No sounds
*********************************
Go to http://imei-number.com/imei-number-lookup/ and type your IMEI written under battery to see if you got the i9000 or M110S
Step 1 download Repair KiT from here ===> http://www.4shared.com/zip/In6R5gmA/repair.html
after you download the file extract it
Step 2 you will find Odin.exe in the extracted folder Run it and follow !
After running Odin enter Download mode (Volumedown+home+power(if u are coming from i9000 firmware) and home+power(M110S))
When you want to click on PIT OR PDA OR CSC Navigate to folder you extracted
step1mx.jpg


Here You enter Donwload mode again with (Volumedown+home+power(if u are coming from i9000 firmware) and home+power(M110S))

step2tu.jpg



Here your phone may boot please turn it off and enter Download mode by only HOME+POWER

step3h.jpg




Then your Phone should boot up Normally !! if You want you can flash latest firmware for M110S version 2.3.6 by entering download mode! leave
everything in odin and make sure re-partition is not checked and you are not using any PIT file just by downloading the firmware and press On PDA and navigate to its download location..(after extracting it ) here is the link ====> http://hotfile.com/dl/162341619/ed86...7_SKT.zip.html
 

kingkamil

Member
Nov 15, 2009
9
0
M110S Soft Bricked Solution
Hey !! i decided to make this thread because i saw many people from different countries and forums complaining about Korean M110s !!!

First of all if you messed up your device and you tried to re-partition and different pit files and wanna revert to stock this is fix for you !!
i myself spent 5 hours online trying to figure out how to fix my device ! so if you got M110s and its converted to i9000 ,you tired flashing i9000 firmware and it fails and on sticker under battery its written :GT-i9000 and I9000GSMH (scam)

its not my work i found the solution in other site and i would like to thank the original person who did this ! and ill try to expand his work i know its frustrating !!

**********************************
Common problems :
1-No Network
2-Home button is not working
3-UNkown baseband
4-No IMEI
5-No sounds
*********************************
Go to http://imei-number.com/imei-number-lookup/ and type your IMEI written under battery to see if you got the i9000 or M110S
Step 1 download Repair KiT from here ===> http://www.4shared.com/zip/In6R5gmA/repair.html
after you download the file extract it
Step 2 you will find Odin.exe in the extracted folder Run it and follow !
After running Odin enter Download mode (Volumedown+home+power(if u are coming from i9000 firmware) and home+power(M110S))
When you want to click on PIT OR PDA OR CSC Navigate to folder you extracted
step1mx.jpg


Here You enter Donwload mode again with (Volumedown+home+power(if u are coming from i9000 firmware) and home+power(M110S))

step2tu.jpg



Here your phone may boot please turn it off and enter Download mode by only HOME+POWER

step3h.jpg




Then your Phone should boot up Normally !! if You want you can flash latest firmware for M110S version 2.3.6 by entering download mode! leave
everything in odin and make sure re-partition is not checked and you are not using any PIT file just by downloading the firmware and press On PDA and navigate to its download location..(after extracting it ) here is the link ====> http://hotfile.com/dl/162341619/ed86...7_SKT.zip.html

i followed these instructions and i got stuck at param.lfs..

help me pls?


<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> param.lfs
 

Attachments

  • param.jpg
    param.jpg
    149.3 KB · Views: 1,015

Kashif.Ali

Senior Member
Sep 6, 2012
102
47
software bricked

i followed these instructions and i got stuck at param.lfs.. help me pls?

<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> param.lfs
attachment.php
 

RolandSyn

New member
Feb 13, 2013
1
1
i followed these instructions and i got stuck at param.lfs.. help me pls?

<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> param.lfs
attachment.php

The same exact problem happened to me. I believe it was caused by the USB connection not being strong enough for the recovery. I managed to get it to work by using a different USB port on my computer and trying repeatedly to make the recovery. After many attempts it went through and was successful. You likely will notice there is zero activity in Odin when this problem is encountered. I would try another USB port, start over with the same port (pull battery), try a different cable, try a different computer. After several hours of repeated attempts it finally went through for me.

I also used a different version of Odin to do the recovery v. 3.04. More about that version is shown here:
http://forum.xda-developers.com/showthread.php?t=1703998 The connection to Odin is a light blue in that version NOT yellow. I can confirm a very successful recovery from a soft bricked m110s.

I followed the steps shown in the Pit Stop which mirror these. The USB connection was so poor that occasionally it could not even be detected as a com port. One last thing is I made sure that all Kies processes were not running. I am on Windows Vista. CTL-ALT-DEL and end all Kies processes. I also had to load USB drivers which are part of heimdall-suite-1.3.1-win32. Look for a drivers directory in that suite and a file named zadig.exe. I'm totally new to this scene but you need a response and it worked for me. I hope some of what I wrote will help you and give you the answer to your recovery or some options to try to get the recovery started.
 
  • Like
Reactions: chandika malli

omeryasin

New member
May 25, 2013
1
0
Error on Second Stage

I am getting Failed Notification in Sceond Stage What should I do????
I hv tried again and again but every time on second stage it gets Failed. Can I bypass second Stage
and wt would I lose if I bypass 2nd stage
 

somator

Senior Member
May 11, 2013
165
54
soo imho step 1 and 2 are usless and what would help and shorten the process is: step 3 with repartion ticked and pitfile from step 1

also it is good idea to backup /EFS/ partition that contains IMEI and from my experience when you flash wrong firmware (wrong device)
the efs partition aka imei gets corrupted and gives you back some internaly hardcoded imei with zeros at the end

so also the process of checking imei (checking device type) is not fully reliable

good intentions but poor execution - good if it works for ome but ...
 

abrarakram19

Member
Mar 24, 2013
36
6
Dubai
Thank! dear for saving my bricked phone.

I bought a GT-I9000 from a online dealer but it was not a actual, it was a fake I9000 it was a M110s but I was not aware of this, its firmware version was 2.3.4 and have a lidroid rom installed with I9000 model no. and it was not connecting with Kies anymore so I decided to upgrade with Odin so I downloaded I9000 firmware with 2.3.6, and my phone got bricked. finally I found your guide and I saved my bricked phone.
thanks for your hard work.
But sir before its model no. and starting screen was showing GT-I9000 but now it is M110s at all. please can you give me any link to restore again to GT-I9000 model no. and starting screen. I have no additional information about baseband version but I only know Its model no. was
I9000 kernel version 2.6.35.7 build number lidroid- I9000-1.2
 
  • Like
Reactions: chandika malli

nuwan thanura

New member
Jul 29, 2013
2
0
m110s Problem

I am getting Failed Notification in Sceond Stage What should I do????
I hv tried again and again but every time on second stage it gets Failed. Can I bypass second Stage
and wt would I lose if I bypass 2nd stage


I Have Same Broblem Pls help I thik That File was Broken Or Not Supported some Version
 

van14

Member
Jul 24, 2013
15
1
M110S Soft Bricked Solution
Hey !! i decided to make this thread because i saw many people from different countries and forums complaining about Korean M110s !!!

First of all if you messed up your device and you tried to re-partition and different pit files and wanna revert to stock this is fix for you !!
i myself spent 5 hours online trying to figure out how to fix my device ! so if you got M110s and its converted to i9000 ,you tired flashing i9000 firmware and it fails and on sticker under battery its written :GT-i9000 and I9000GSMH (scam)

its not my work i found the solution in other site and i would like to thank the original person who did this ! and ill try to expand his work i know its frustrating !!

**********************************
Common problems :
1-No Network
2-Home button is not working
3-UNkown baseband
4-No IMEI
5-No sounds
*********************************
Go to http://imei-number.com/imei-number-lookup/ and type your IMEI written under battery to see if you got the i9000 or M110S
Step 1 download Repair KiT from here ===> http://www.4shared.com/zip/In6R5gmA/repair.html
after you download the file extract it
Step 2 you will find Odin.exe in the extracted folder Run it and follow !
After running Odin enter Download mode (Volumedown+home+power(if u are coming from i9000 firmware) and home+power(M110S))
When you want to click on PIT OR PDA OR CSC Navigate to folder you extracted
step1mx.jpg


Here You enter Donwload mode again with (Volumedown+home+power(if u are coming from i9000 firmware) and home+power(M110S))

step2tu.jpg



Here your phone may boot please turn it off and enter Download mode by only HOME+POWER

step3h.jpg




Then your Phone should boot up Normally !! if You want you can flash latest firmware for M110S version 2.3.6 by entering download mode! leave
everything in odin and make sure re-partition is not checked and you are not using any PIT file just by downloading the firmware and press On PDA and navigate to its download location..(after extracting it ) here is the link ====> http://hotfile.com/dl/162341619/ed86...7_SKT.zip.html


thanks for fix it :good::good:
 

hammzah.rockx

New member
Aug 24, 2013
2
0
Odin is not detecting my m110s... :(

odin is not detecting my samsung s korean m110s in download mode......i've installed the samsung drivers but no response from odin.......... help me please..........:crying:
 

shahdarock

New member
Dec 7, 2012
2
0
thnx thnx & thnx

thnx man you saved my life hahaha i just bricked my cousins phone and finally got your forum some how by googling and i also had google PITSTOP and it's links are also working but archive files were not working so you are the hero of the day
 

zakazeky

New member
Jan 17, 2014
1
0
new problem in galaxy m110s

i have flash this Mobil galaxy m110s with galaxy s i9000 ROM from Samsung website the Odin start flash but in the end give me filer
when i restart the Mobil not open again .
stay in black screen no power no thing.
when i charge it no charging screen
no any thing .
any help here ????
 

atsa1

Member
Dec 5, 2010
5
0
Need some help

Thought i have I9000 but seems like i have M110S.
Use odin to flash but now only thing i get is on startup the S logo and then it reboots.
When i take out the battery and put it back. Connect the USB cable it starts and show the little ring what freezes but after couple of minutes it connects to the PC and shows 2 memory cars. None of them i can access because PC tells me not partitioned. Cannot get the odin to connect and adb neither sees the phone.
Is there any way to get it running again?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 9
    M110S Soft Bricked Solution
    Hey !! i decided to make this thread because i saw many people from different countries and forums complaining about Korean M110s !!!

    First of all if you messed up your device and you tried to re-partition and different pit files and wanna revert to stock this is fix for you !!
    i myself spent 5 hours online trying to figure out how to fix my device ! so if you got M110s and its converted to i9000 ,you tired flashing i9000 firmware and it fails and on sticker under battery its written :GT-i9000 and I9000GSMH (scam)

    its not my work i found the solution in other site and i would like to thank the original person who did this ! and ill try to expand his work i know its frustrating !!

    **********************************
    Common problems :
    1-No Network
    2-Home button is not working
    3-UNkown baseband
    4-No IMEI
    5-No sounds
    *********************************
    Go to http://imei-number.com/imei-number-lookup/ and type your IMEI written under battery to see if you got the i9000 or M110S
    Step 1 download Repair KiT from here ===> http://www.4shared.com/zip/In6R5gmA/repair.html
    after you download the file extract it
    Step 2 you will find Odin.exe in the extracted folder Run it and follow !
    After running Odin enter Download mode (Volumedown+home+power(if u are coming from i9000 firmware) and home+power(M110S))
    When you want to click on PIT OR PDA OR CSC Navigate to folder you extracted
    step1mx.jpg


    Here You enter Donwload mode again with (Volumedown+home+power(if u are coming from i9000 firmware) and home+power(M110S))

    step2tu.jpg



    Here your phone may boot please turn it off and enter Download mode by only HOME+POWER

    step3h.jpg




    Then your Phone should boot up Normally !! if You want you can flash latest firmware for M110S version 2.3.6 by entering download mode! leave
    everything in odin and make sure re-partition is not checked and you are not using any PIT file just by downloading the firmware and press On PDA and navigate to its download location..(after extracting it ) here is the link ====> http://hotfile.com/dl/162341619/ed86...7_SKT.zip.html
    2

    Hey !! i decided to make this thread because i saw many people from different countries and forums complaining about Korean M110s !!!


    The M110S FAQ, Q&A, Guides etc Thread is here

    Anything and Everything for M110S is compiled and known as PIT STOP

    M110S Scam is also Exposed here
    1
    Yeah but Ive to put it in i9000 general and i used the thread things is not clear! So i made it for others ;)

    Sent from my GT-N7000 using Tapatalk 2
    1
    i followed these instructions and i got stuck at param.lfs.. help me pls?

    <ID:0/004> Added!!
    <ID:0/004> Odin v.3 engine (ID:4)..
    <ID:0/004> File analysis..
    <ID:0/004> Enter CS for MD5..
    <ID:0/004> Check MD5.. Do not unplug the cable..
    <ID:0/004> Please wait..
    <ID:0/004> Checking MD5 finished Sucessfully..
    <ID:0/004> Leave CS..
    <ID:0/004> SetupConnection..
    <ID:0/004> Initialzation..
    <ID:0/004> Set PIT file..
    <ID:0/004> DO NOT TURN OFF TARGET!!
    <ID:0/004> Get PIT for mapping..
    <ID:0/004> Firmware update start..
    <ID:0/004> param.lfs
    attachment.php

    The same exact problem happened to me. I believe it was caused by the USB connection not being strong enough for the recovery. I managed to get it to work by using a different USB port on my computer and trying repeatedly to make the recovery. After many attempts it went through and was successful. You likely will notice there is zero activity in Odin when this problem is encountered. I would try another USB port, start over with the same port (pull battery), try a different cable, try a different computer. After several hours of repeated attempts it finally went through for me.

    I also used a different version of Odin to do the recovery v. 3.04. More about that version is shown here:
    http://forum.xda-developers.com/showthread.php?t=1703998 The connection to Odin is a light blue in that version NOT yellow. I can confirm a very successful recovery from a soft bricked m110s.

    I followed the steps shown in the Pit Stop which mirror these. The USB connection was so poor that occasionally it could not even be detected as a com port. One last thing is I made sure that all Kies processes were not running. I am on Windows Vista. CTL-ALT-DEL and end all Kies processes. I also had to load USB drivers which are part of heimdall-suite-1.3.1-win32. Look for a drivers directory in that suite and a file named zadig.exe. I'm totally new to this scene but you need a response and it worked for me. I hope some of what I wrote will help you and give you the answer to your recovery or some options to try to get the recovery started.
    1
    Thank! dear for saving my bricked phone.

    I bought a GT-I9000 from a online dealer but it was not a actual, it was a fake I9000 it was a M110s but I was not aware of this, its firmware version was 2.3.4 and have a lidroid rom installed with I9000 model no. and it was not connecting with Kies anymore so I decided to upgrade with Odin so I downloaded I9000 firmware with 2.3.6, and my phone got bricked. finally I found your guide and I saved my bricked phone.
    thanks for your hard work.
    But sir before its model no. and starting screen was showing GT-I9000 but now it is M110s at all. please can you give me any link to restore again to GT-I9000 model no. and starting screen. I have no additional information about baseband version but I only know Its model no. was
    I9000 kernel version 2.6.35.7 build number lidroid- I9000-1.2
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone