Magicsee C400 Plus DVB-S2/T2/C

Search This thread

Malaysk

Senior Member
Jan 31, 2011
1,693
5,810
Magicsee C400 Plus DVB-S2/T2/C​
Official site : http://www.magicsees.com/prod_view.aspx?TypeId=66&Id=191&FId=t3:66:3
Official store on Aliexpress : HERE

Parameter :
Hardware
CPU Amlogic S912 Octa core ARM Cortex-A53
GPU Mali-T820MP3 3D Graphics OpenGL ES 1.1/2.0 and Open VG 1.1 support
RAM DDRIII 3GB
ROM eMMC Flash 32GB
WiFi Dual band (2.4GHz/5.8GHz) IEEE 802.11a/b/g/n/ac
Blutooth Bluetooth 4.1
IR Infra Remote control
LED Indicator Power ON :blue; Standby :Red
Digital tube display Support
I/O HDMI 4K/2K HDMI2.0
3*USB HOST 3 High speed USB 2.0,support U DISK and USB HDD
1*TF CARD Micro TF Card (Maximum support 32GB)
1*AV AV output
1*SPDIF Audio output
1*RJ45 10M/100M
Power DC Adapter ( 12V/1.5A)
DVB-S2 DVB-S2 system standard:ETS 302 307
Symbol Rates: QPSK,8PSK
Forward error correction rate 1/4,1/3,2/5,3/5,2/3,3/4,4/5,5/6,8/9,9/10
Carrier frequency acquisition range: ±5MHz for symbol rates above 3 Msps and ±3MHz for the remaining symbol rates
Roll-off factors for pulse shaping: 0.2, 0.25 and 0.35
Symbol Rates: 1- 55 Msps
Code Rates: 1/2, 2/3, 3/4, 5/6, 7/8
Input Signal level: -84 dBm to 0 dBm (average power)
ANT. Connector:IEC TYPE F
DVB-T2 DVB-T2 system standard:ETSIEN 302 755
Support MPLP
Demodulation: QPSK,16QAM,64QAM or 256QAM
Forward error correction rate 1/2,2/3,3/4,3/5,5/6
Guard interval :1/4,19/256,1/8,19/128,1/16,1/32,1/128
Bandwith: 6/7/8MHz
Input Frange range:54—860MHz Input Impedance:75 Ω
Input Signal level: -84 dBm to -5 dBm (average power)
ANT. Connector:IEC TYPE, female
DVB-C Demodulation: QPSK,16QAM,64QAM or 256QAM
Bandwith: 6/7/8MHz
Input Frange range:54—860MHz Input Impedance:75 Ω
Input Signal level: -84 dBm to -5 dBm (average power)
ANT. Connector:IEC TYPE, female
Decoder HD MPEG1/2/4,H.265/HEVC , HD AVC/VC-1,RM/RMVB,Xvid/DivX3/4/5/6 ,RealVideo8/9/10
Video AVI/RM/RMVB/TS/VOB/MKV/MOV/ISO/WMV/ASF/FLV/DAT/MPG/MPEG
Music MP3/WMA/AAC/WAV/OGG/DDP/TrueHD/HD/FLAC/APE
Photo HD JPEG/BMP/GIF/PNG/TIFF
Video UHD 4K 60fps HW decoding, supports multiple formats including H.265 10-bit, H.264 and AVS+FHD 1080p 60fps HW encoding, supports H.264
OS Android 7.1.2

Firmware is not suitable for new C400 devices released after 2019 !!!
________________________________________________
The image is stitched through the USB Burning Tool, a suitable instruction - http://www.magicsees.com/news_view.aspx?TypeId=4&Id=401&Fid=t2:4:2
Factory firmware from C400 Plus from 04.05.2018 :https://cloud.mail.ru/public/MJeP/NRG49epa8
Factory firmware from C400 Plus from 20.06.2018 :https://cloud.mail.ru/public/ERNx/25BaFLigA
Factory firmware from C400 Plus from 20.07.2018 :https://forum.xda-developers.com/showpost.php?p=77208180&postcount=35


Access to the data CCcam entry menu: Menu - Settings and here enter the numbers "6699"
________________________________________________
Custom firmware
All that you do, you do only at your own risk (I must warn you)​
Firmware is not suitable for new C400 devices released after 2019 !!!
What's added, changed, deleted:
Base - factory firmware for C400 Plus from May 04, 2018 Android 7.1.2
Built-in Root access- SuperSU (hidden)
Built-in ViperFX (turn on there amplification of sound to a maximum)
Replaced by Launcher, in my opinion more convenient.
The volume bar is changed and increased to 30 volume values.
Added to the basic settings - Weather and Time Settings for display in the DTV application.
I recommend setting there for Time Settings: Location - Left and Date - Do not show. And set the Weather - to allow Location - by all sources.
Added support for Picons in the DTV application. In the archive along with the firmware there is an archive Picons_Copy_to_internal_memory_ (sdcard) .rar, you need to unzip it and copy the whole Picons folder to the root of the internal memory of the device (sdcard). If you do not show what kind of picos on certain channels, then you need to put an image of this kind in this folder: for example the channel name in InfoBar is displayed as the First Regional, then the image name should be exactly the same, including spaces and case and will be First Regional.png.
Added support for Live wallpapers and just wallpapers. Located in Settings - Screen - Wallpaper.
The InfoBar's display time has been increased and it has been redone.
Added Samba support (for displaying the set-top box in the Network environment on desktop computers)
Access to the data CCcam entry menu: Menu - Settings and here enter the numbers "1111"
The image is stitched through the USB Burning Tool, a suitable instruction - http://www.magicsees.com/news_view.aspx?TypeId=4&Id=401&Fid=t2:4:2
Download Version 1.0 of May 23, 2018 for the C400 Plus: https://yadi.sk/d/Yp-alP9Z3WeZJK

Firmware for recovery, instruction inside the archive, in the file ReadMe
Download Version 1.1 of May 29, 2018 for the C400 Plus: https://yadi.sk/d/ccSoBofD3WfJJe
Download Version 1.6 of 25 June, 2018 for the C400 Plus: https://yadi.sk/d/wnfymgZb3YNvjv
+The EPG fix in the channel list for DVB-T2
+Fixing Clock Settings
Download Version 1.8 of July 24, 2018 for the C400 Plus: https://yadi.sk/d/-SNms6Ie3ZWZmu
After installing version 2.0, you must reset to factory settings in the DTV application and scan the channels again!
+ Fixed clock in sleep mode
+ Optimizing the channel list
+ Provider ID in the Channel Editor and Favorites
+ Other fixes and additions

Download Version 2.0 of August 25, 2018 for the C400 Plus: https://yadi.sk/d/Z-qCvM4m3aYdTK
If you like my firmware and think that I'm wasting a lot of time to improve the firmware, then "Donate to Me"
 

Attachments

  • Screenshot_20180522-201205.png
    Screenshot_20180522-201205.png
    142.1 KB · Views: 5,656
  • Screenshot_20180522-203252.png
    Screenshot_20180522-203252.png
    82.9 KB · Views: 5,538
  • 2018_05_23_23.08.27.png
    2018_05_23_23.08.27.png
    149.3 KB · Views: 5,402
  • 2018_05_24_08.25.01.jpg
    2018_05_24_08.25.01.jpg
    255.3 KB · Views: 5,694
  • 2018_05_24_08.25.35.png
    2018_05_24_08.25.35.png
    133.2 KB · Views: 5,539
  • 2018_05_24_08.25.54.jpg
    2018_05_24_08.25.54.jpg
    118.1 KB · Views: 5,467
  • 2018_06_22_10.41.58.jpg
    2018_06_22_10.41.58.jpg
    180.6 KB · Views: 4,499
  • 2018_07_21_15.17.05.jpg
    2018_07_21_15.17.05.jpg
    206.9 KB · Views: 4,253
Last edited:

temamix

Member
May 3, 2018
13
24
51
Bern
without a doubt, it is possible. c300 / 400
for the c300 there is a photo of 4k channels at the end of the review. in c400 more memory and wifi 5 Hz
 
Last edited:

njh70

Member
Jun 9, 2018
18
7
Thank you so much for this mod.
There is one thing that is causing me issues, with this and the official rom, which is the status bar is getting in the way of the YouTube app.
Is there a setting in your rom to hide the status bar, or can you adivise on the best way to do this.
 

njh70

Member
Jun 9, 2018
18
7
Version 1.5 seems to be working fine in my testing.
One thing I have noticed that is different from previous version, is that the box does not display as OFF mode, when sending to sleep. It stops the video output, so I am not sure if it was configured to show the time when in standby instead of red light and 'OFF'.
I still have issues with colour distortion issues on HD channels after watching satellitte through the DVT player, but this issue was present in the official rom.
 
  • Like
Reactions: salvaleon

CAPTNEMO

New member
Apr 8, 2007
1
0
I've bought this TV Box.
I can not record from a TV channel.
I have tried with microSD, with an external hard drive, with USB Flash
which I have modified, and as a removable storage space
and in an internal shared storage area.
When I press REC, I always get the same message, Invalid Input !!
What can happen?
 

njh70

Member
Jun 9, 2018
18
7
I have noticed with 1.6 that there is a slight difference with HDMI CEC behaviour from the box. It will power on tv when powering up the box, but It will no longer switch the HDMI source.
 

jonim

New member
Oct 25, 2009
3
0
Is this kernel based on 64 bits?
I just bought this TV box after using KIII PRO using your ROM, I was happy with the performance except that it does not allow to install 64 bit KODI.
But magicsee surprised me that it could.
I am thinking of upgrading to your ROM but afraid I may lose the 64 bit kernel.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 8
    Magicsee C400 Plus DVB-S2/T2/C​
    Official site : http://www.magicsees.com/prod_view.aspx?TypeId=66&Id=191&FId=t3:66:3
    Official store on Aliexpress : HERE

    Parameter :
    Hardware
    CPU Amlogic S912 Octa core ARM Cortex-A53
    GPU Mali-T820MP3 3D Graphics OpenGL ES 1.1/2.0 and Open VG 1.1 support
    RAM DDRIII 3GB
    ROM eMMC Flash 32GB
    WiFi Dual band (2.4GHz/5.8GHz) IEEE 802.11a/b/g/n/ac
    Blutooth Bluetooth 4.1
    IR Infra Remote control
    LED Indicator Power ON :blue; Standby :Red
    Digital tube display Support
    I/O HDMI 4K/2K HDMI2.0
    3*USB HOST 3 High speed USB 2.0,support U DISK and USB HDD
    1*TF CARD Micro TF Card (Maximum support 32GB)
    1*AV AV output
    1*SPDIF Audio output
    1*RJ45 10M/100M
    Power DC Adapter ( 12V/1.5A)
    DVB-S2 DVB-S2 system standard:ETS 302 307
    Symbol Rates: QPSK,8PSK
    Forward error correction rate 1/4,1/3,2/5,3/5,2/3,3/4,4/5,5/6,8/9,9/10
    Carrier frequency acquisition range: ±5MHz for symbol rates above 3 Msps and ±3MHz for the remaining symbol rates
    Roll-off factors for pulse shaping: 0.2, 0.25 and 0.35
    Symbol Rates: 1- 55 Msps
    Code Rates: 1/2, 2/3, 3/4, 5/6, 7/8
    Input Signal level: -84 dBm to 0 dBm (average power)
    ANT. Connector:IEC TYPE F
    DVB-T2 DVB-T2 system standard:ETSIEN 302 755
    Support MPLP
    Demodulation: QPSK,16QAM,64QAM or 256QAM
    Forward error correction rate 1/2,2/3,3/4,3/5,5/6
    Guard interval :1/4,19/256,1/8,19/128,1/16,1/32,1/128
    Bandwith: 6/7/8MHz
    Input Frange range:54—860MHz Input Impedance:75 Ω
    Input Signal level: -84 dBm to -5 dBm (average power)
    ANT. Connector:IEC TYPE, female
    DVB-C Demodulation: QPSK,16QAM,64QAM or 256QAM
    Bandwith: 6/7/8MHz
    Input Frange range:54—860MHz Input Impedance:75 Ω
    Input Signal level: -84 dBm to -5 dBm (average power)
    ANT. Connector:IEC TYPE, female
    Decoder HD MPEG1/2/4,H.265/HEVC , HD AVC/VC-1,RM/RMVB,Xvid/DivX3/4/5/6 ,RealVideo8/9/10
    Video AVI/RM/RMVB/TS/VOB/MKV/MOV/ISO/WMV/ASF/FLV/DAT/MPG/MPEG
    Music MP3/WMA/AAC/WAV/OGG/DDP/TrueHD/HD/FLAC/APE
    Photo HD JPEG/BMP/GIF/PNG/TIFF
    Video UHD 4K 60fps HW decoding, supports multiple formats including H.265 10-bit, H.264 and AVS+FHD 1080p 60fps HW encoding, supports H.264
    OS Android 7.1.2

    Firmware is not suitable for new C400 devices released after 2019 !!!
    ________________________________________________
    The image is stitched through the USB Burning Tool, a suitable instruction - http://www.magicsees.com/news_view.aspx?TypeId=4&Id=401&Fid=t2:4:2
    Factory firmware from C400 Plus from 04.05.2018 :https://cloud.mail.ru/public/MJeP/NRG49epa8
    Factory firmware from C400 Plus from 20.06.2018 :https://cloud.mail.ru/public/ERNx/25BaFLigA
    Factory firmware from C400 Plus from 20.07.2018 :https://forum.xda-developers.com/showpost.php?p=77208180&postcount=35


    Access to the data CCcam entry menu: Menu - Settings and here enter the numbers "6699"
    ________________________________________________
    Custom firmware
    All that you do, you do only at your own risk (I must warn you)​
    Firmware is not suitable for new C400 devices released after 2019 !!!
    What's added, changed, deleted:
    Base - factory firmware for C400 Plus from May 04, 2018 Android 7.1.2
    Built-in Root access- SuperSU (hidden)
    Built-in ViperFX (turn on there amplification of sound to a maximum)
    Replaced by Launcher, in my opinion more convenient.
    The volume bar is changed and increased to 30 volume values.
    Added to the basic settings - Weather and Time Settings for display in the DTV application.
    I recommend setting there for Time Settings: Location - Left and Date - Do not show. And set the Weather - to allow Location - by all sources.
    Added support for Picons in the DTV application. In the archive along with the firmware there is an archive Picons_Copy_to_internal_memory_ (sdcard) .rar, you need to unzip it and copy the whole Picons folder to the root of the internal memory of the device (sdcard). If you do not show what kind of picos on certain channels, then you need to put an image of this kind in this folder: for example the channel name in InfoBar is displayed as the First Regional, then the image name should be exactly the same, including spaces and case and will be First Regional.png.
    Added support for Live wallpapers and just wallpapers. Located in Settings - Screen - Wallpaper.
    The InfoBar's display time has been increased and it has been redone.
    Added Samba support (for displaying the set-top box in the Network environment on desktop computers)
    Access to the data CCcam entry menu: Menu - Settings and here enter the numbers "1111"
    The image is stitched through the USB Burning Tool, a suitable instruction - http://www.magicsees.com/news_view.aspx?TypeId=4&Id=401&Fid=t2:4:2
    Download Version 1.0 of May 23, 2018 for the C400 Plus: https://yadi.sk/d/Yp-alP9Z3WeZJK

    Firmware for recovery, instruction inside the archive, in the file ReadMe
    Download Version 1.1 of May 29, 2018 for the C400 Plus: https://yadi.sk/d/ccSoBofD3WfJJe
    Download Version 1.6 of 25 June, 2018 for the C400 Plus: https://yadi.sk/d/wnfymgZb3YNvjv
    +The EPG fix in the channel list for DVB-T2
    +Fixing Clock Settings
    Download Version 1.8 of July 24, 2018 for the C400 Plus: https://yadi.sk/d/-SNms6Ie3ZWZmu
    After installing version 2.0, you must reset to factory settings in the DTV application and scan the channels again!
    + Fixed clock in sleep mode
    + Optimizing the channel list
    + Provider ID in the Channel Editor and Favorites
    + Other fixes and additions

    Download Version 2.0 of August 25, 2018 for the C400 Plus: https://yadi.sk/d/Z-qCvM4m3aYdTK
    If you like my firmware and think that I'm wasting a lot of time to improve the firmware, then "Donate to Me"
    3
    Version 1.8 of July 24, 2018
    3
    С400 plus

    the last official firmware. 20180718
    Installing the SD card. Corrected EPG.
    https://cloud.mail.ru/public/HiXo/2x6LBYR4C
    2
    Version 2.0 of August 25, 2018 for the C400 Plus
    After installing version 2.0, you must reset to factory settings in the DTV application and scan the channels again!
    2
    @Malaysk thanks for your very nice custom Rom.

    I use version 1.8 and i would like to inform you about 2 basic problems.
    1. On DTV application i have colour distortion issues only on DVB-T HD channels not on the SD channels.

    Record the video of the problem HD channel. Press the REC button on the remote control and put this video. Let's correct it.
    @Malaysk thanks for your very nice custom Rom.

    I use version 1.8 and i would like to inform you about 2 basic problems.
    2. Cccam emulator restarts all the time.
    Install the program from the Play Market - Catlog. Click on it to write the log. Run the DTV for 10 minutes. Go back to Catlog and stop logging. Send it here.