[MAGISK][MOD][EOL][v5] Dual Speaker Mod For Redmi K20 Pro

Search This thread

acervenky

Recognized Contributor
Mar 25, 2012
2,324
4,916
Mumbai
This mod enables the earpiece to be used as a secondary speaker for audio output.

Disclaimer : I'm not responsible for any damage to your device.

Youtube :


Instructions & Working :
Download the mod
Flash via Magisk Manager/TWRP
Reboot



Download : AFH

Source :
Github

Changelog :
v1 - Initial Release
v2 - #77
v3 - #82
v4 - #118
v5 - #269
EOL + v5exp - #296

Note :
Download the file in the attachment, extract it & move it to ViPER4Android/Kernel folder in internal storage and select TubeAmplifier file in Convolver. This will significantly boost the output of both the speakers without causing any distortions. [Original thread]

To disable the mod, simply uninstall it from the magisk manager.

Credits :
Dante63 for his guide

Regards,
acervenky
 

Attachments

  • tubeamplifier.zip
    26.6 KB · Views: 11,914
Last edited:

acervenky

Recognized Contributor
Mar 25, 2012
2,324
4,916
Mumbai
thanks. this is 9.7.11 mixer.

This is from eu 10.3.15 stable.
Thank you.
Thank you for providing the files!
Found out that the mixer files on all three variants are common.
Please try out the attached file and report back!

Regards,
acervenky
 

Attachments

  • K20Pro_DualSpeaker_boost.zip
    18.7 KB · Views: 529

acervenky

Recognized Contributor
Mar 25, 2012
2,324
4,916
Mumbai
Didn't work for me unfortunately. I'm running the 10.3.15 stable. Thanks!

Some users have reported that stock audio eq may cause issues with this mod, can you try the following steps and report back?
Guys im using latest stock rom this mod works my steps:

1.freeze stock musicfx.apk
2.flash viper audio via magisk
4.flash acervenky's dual speaker mod
5.enjoy

I don't promiss that will work in miui or other roms, as i wrote im using latest havoc rom.

Both of them isn't my work everybody should know that. Im just figured out how to works on my device.

Gesendet von meinem MI 8 mit Tapatalk

Regards,
acervenky
 

joe64

Member
May 23, 2019
29
0
Some users have reported that stock audio eq may cause issues with this mod, can you try the following steps and report back?


Regards,
acervenky

I try it

First. Freeze apk

Second install viper

Finally. Your patch dualspeakermod.

Work it but have some problem.

Only... Earpice speaker work. Not dual -_- change speaker kkkk

Maybe... Your dualmod File is not perfectly

I tested it eu stable 10.3.16 thanks.

Pls feedback and upload your modify file thanks
 
Last edited:

acervenky

Recognized Contributor
Mar 25, 2012
2,324
4,916
Mumbai
I try it

First. Freeze apk

Second install viper

Finally. Your patch dualspeakermod.

Work it but have some problem.

Only... Earpice speaker work. Not dual -_- change speaker kkkk

Maybe... Your dualmod File is not perfectly

I tested it eu stable 10.3.16 thanks.

Pls feedback and upload your modify file thanks
Try enabling the Mono Audio option in Settings/Accessibility

Regards,
acervenky
 

Top Liked Posts

  • There are no posts matching your filters.
  • 46
    This mod enables the earpiece to be used as a secondary speaker for audio output.

    Disclaimer : I'm not responsible for any damage to your device.

    Youtube :


    Instructions & Working :
    Download the mod
    Flash via Magisk Manager/TWRP
    Reboot



    Download : AFH

    Source :
    Github

    Changelog :
    v1 - Initial Release
    v2 - #77
    v3 - #82
    v4 - #118
    v5 - #269
    EOL + v5exp - #296

    Note :
    Download the file in the attachment, extract it & move it to ViPER4Android/Kernel folder in internal storage and select TubeAmplifier file in Convolver. This will significantly boost the output of both the speakers without causing any distortions. [Original thread]

    To disable the mod, simply uninstall it from the magisk manager.

    Credits :
    Dante63 for his guide

    Regards,
    acervenky
    17
    EOL

    I received many requests to port the dual earphone feature from RUI, this is untested and may result in bootloop; so proceed only if you know what you're doing!
    Download : v5exp

    And about the mod, v5 will be the last version. Anyone who is interested to maintain it further can refer to my repository for additional info.
    To view the changes in latest RUI mixers, refer to this commit!
    Thank you to all the testers for reporting back and users who uploaded their mixers from latest firmwares, I worked on several mods for this device & it has been a great pleasure to be a part of raphael community.

    Regards,
    acervenky
    12
    Ok guys as I said the manually installation works also on 11.0.5 and multiple audio mods.

    Required ADB, busybox and permissive selinux switched.
    Install viper all, then install aml, then install viper drivers, reboot.... Reboot and reinstall until you get viper working, if it does not try installing viper drivers by unchecking aml in magisk modules.

    Set viper as you like, I suggest tube ampl8fier convulator and -14db master audio plus all modifications you like, over headset and Bluetooth I suggest xhifi crystal audio and to boost basses with the specific option. (Convulators kernels goes in viper4android/kernels folder).

    Once you got this working just install the 320kbps bitrate magisk module and reboot.

    Now you have a great audio, but beleave me that if you successfully install as below described also dual speaker and low latency mode you can't beleave how astonishing and perfect audio reproduction is, like having a laptop in your hands, crystal clear... The people who say they don t mind about the difference they actually didn't even recognize that they haven't successfully installed any dual speaker mod correctly....so do as follows now:

    Just extract from v4 magisk module the mixer XML files and put them in system vendor etc folder and set permissions to 0644 aka rw-r-r (I put them attached anyway, these are from v4 dual speaker mode created from the owner of this thread)

    Put audio policy XML file posted for the latency problem by previous member in vendor system etc audio and set permissions to 0644 aka rw-r-r

    This file must be extracted from the zip in the attachment

    Be sure in your phone options you have MONO AUDIO disabled and left/right channel balanced 50%. (In my case I had problems before because the audio was settled to mono and because I gave wrong permission to files.... Be sure to set them all on rw-r-r (0644 indeed).

    I use old but still best for me es file manager

    You won't believe what a boost you have..

    Actually I suggest installing immensity kernel v11 (user experience flows, AnTuTu got from 410k to 450k and ram, memory and file reading access is way faster now.)

    Also use 75hz dtbo which i tested working only with this immensity kernel and doesn't require DC antiflickering and works everywhere with no frame drops and battery impact and no green tint.
    No need to install or use the disable he overlay

    And now finally both kernel and dtbo doesn't break widevine so you still get l1 hdr support and netflix works at 1080p hdr, this wasn't working in the past.

    These are all the suggestions I can give to get the max out of k20 pro.

    I should make a separete thread with "suggested tested working modifications to get the perfect k20 pro".

    Have a try guys, won't regret for sure.

    Of course get cloudflare DNS, YouTube vanced , Google pay fix, latest magisk, and you have a greatly no bugs customized phone , SnapTube, idm, or whatever apps you like to use. Good is fouad WhatsApp for strong privacy settings.

    Best cam out of all testing is parrots V10, attached my config after many tests this is the best all situation config I could get, of course others may not like it, I use it daily for pics, only use stock camera for videos. Even latest release aren't good as this with these settings in my opinion, so I'm stuck to V10, get it on gcams azsvedo archive.

    Dtbo file must be extracted and installed as image through twrp.
    Install whatever spam blocker such as adaway, maybe using unified hosts , get instruction on this forum, just be sure to whitelist apps domain such as news Republic or medscape if you use them.

    All rights and thanks go to the relative developers who created the various files.

    Regards,
    Michele
    11
    v4 Released

    Changelog :
    Code:
    Optimized gain of Main Speaker & Earpiece
    Eliminate Delay Between Both The Speakers
    Change the config to Mono (will fix the R channel not playing through main speaker)

    Attached the loudness enhancement irs file to OP, download it and follow the instructions!
    The mod is now refined, will move to AML from next release!

    Regards,
    acervenky
    10
    v5 Released

    Changelog :
    Code:
    Updated mixers from latest A10 firmware to eliminate issues with BT
    New magisk template
    Audio-ull enabled

    Regards,
    acervenky
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone