[MAGISK Rom / SHRP Recovery / Flashable Base ) 420rom N976B/0/5F - V11.0 - EUA5 - ANDROID 11 - OneUI 3.0 - Sec Patch 01/2021 - Released 03/02/2021

[exocetdj]

Hey Mate! Hope you're doing well.

If you can guide me and share notes, I would love to provide support for N970F.
Regards

OK you will probably need to make a small investment for the SuperR kitchen. However this will make things so much easier and able me to guide you properly.

I'll tidy up my notes and hand you a copy to look at

 

[navaskp]

Process for getting round SAMSUNG screen issue caused by older TWRPs with future dates (Rollback protection issue)

-Flash the Unpatched TWRP for your device in the TWRP app - reboot TWRP and check the box to kill that annoying swipe to allow modifications and then you are good to install the module !!!

I got this samsung screen stuck problem and did exactly like you told. Howerver, I did not get this point? I can find no TWRP app to flash TWRP while booted?

 

[66diament66]

Hello, I have a problem with the installation of the samsung module, every time after restart the phone is on the samsung logo and nothing else happens, but the installation of the Google module works correctly

 

[abun880007]

V8,0 Bases and Rom Modules have been Released

Hi All,

The Note 10+ base and Rom Modules have been updated to v8.0. It is based on the new 11/2020 Security patch firmware DTJ4. Please make sure you are on the DTJ4 Samsung stock base before installing this update.

Changelog
v8.0

Rom Module

- Files Rebased to DTJ4 11-2020 Security Patch
- Performance and Bug fixes
- Updates all included Apps For Samsung and Google Editions

Module Base

- Files Rebased to DTJ4 11-2020 Security Patch
- Magisk Manager updated to 8.0.2
- Performance and Bug fixes

Kind Regards,

abun880007

 

[66diament66]

how to solve this problem ?

 

[abun880007]

how to solve this problem ?

you need to enable magisk hide and enable it on one app, then reboot and you should pass safetynet

 

[66diament66]

how to do it?
ok already found it

 

[sopel342@gmail.com]

How did you do it, I do the same and it's all red anyway

---------- Post added at 06:37 PM ---------- Previous post was at 06:35 PM ----------

how to solve this problem ?

How did you do it, I do the same and it's all red anyway

 

[dksoni411]

Is it possible to root current module on rooted stock rom on N970f? Because N970f related files are removed from latest module zip. @exocetdj @abun880007

 

[abun880007]

Is it possible to root current module on rooted stock rom on N970f? Because N970f related files are removed from latest module zip. @exocetdj @abun880007

The Module currently doesn't have N970F support. I will see if I can re-implement it for next build. This will be done blind as i dont have the device so there will be no testing done.

 

[dksoni411]

The Module currently doesn't have N970F support. I will see if I can re-implement it for next build. This will be done blind as i dont have the device so there will be no testing done.

That would be so kind of you. I can test and provide feedback on that

 

[abun880007]

That would be so kind of you. I can test and provide feedback on that

Release of 8.1 Samsung and Google Rom Modules

v8.1 Changelog

Module Base

- Re-added Note 10 N970F to the Rom Module (must be on Stock Rooted Base)
- Added Selectable CSC features (so you can now choose which ones you want and don't)
- Performance and Bug fixes

 

[dksoni411]

Release of 8.1 Samsung and Google Rom Modules

v8.1 Changelog

Module Base

- Re-added Note 10 N970F to the Rom Module (must be on Stock Rooted Base)
- Added Selectable CSC features (so you can now choose which ones you want and don't)
- Performance and Bug fixes

Hi Mate!
Just downloaded the rom module, tried to flash it on fresh rooted stock firmware. Whenever I try to install it in Magisk manager, after pressing vol key, it shows 420 rom picture and then magisk shows installation failed

Any suggestion?

 

[abun880007]

Hi Mate!
Just downloaded the rom module, tried to flash it on fresh rooted stock firmware. Whenever I try to install it in Magisk manager, after pressing vol key, it shows 420 rom picture and then magisk shows installation failed

Any suggestion?

Thre was a problem with the installer that has now been fixed, please re-download and try again

 

[dksoni411]

Thre was a problem with the installer that has now been fixed, please re-download and try again

Just Installed new fixed version. Everything went well and reboot. However, some csc features including call record, data usage in notification panel, app locker, App internet restricter aren't working

Vanced Installed
3minit clock and battery both working
Netflix, kids home etc are removed as expected
Will post as more is checked
Edit 1
There's force close when I try to open Software Information from about Phone

 

[abun880007]

Just Installed new fixed version. Everything went well and reboot. However, some csc features including call record, data usage in notification panel, app locker, App internet restricter aren't working

Vanced Installed
3minit clock and battery both working
Netflix, kids home etc are removed as expected
Will post as more is checked
Edit 1
There's force close when I try to open Software Information from about Phone

will see if i can see whats going on with that

 

[p220fhf]

Can I install this rom on my sm-n9750 with the DTK1 Security Patch?

 

[66diament66]

installs drivers viper fx restarts the phone, enter the application and a message pops up that the drivers need to be reinstalled and so on ?

 

[abun880007]

installs drivers viper fx restarts the phone, enter the application and a message pops up that the drivers need to be reinstalled and so on ?

I am currently looking into the V4AFX issue

Sent from my SM-N976B using Tapatalk

 

[abun880007]

V8.2 Rom Modules have been Released

v8.2 Changelog

Rom Module

- Fixed CSC Mods on Note 10 N970F
- Fixed System information in Settings on Note 10 N970F
- Performance and Bug fixes

Known Issues

-Viper4AndroidFX does not currently work with the Rom Module