[MAGISK ROM][v3.0.0] Oxygen Expansion | Oxygen Mods+ | OxyPlus Tinting | Supports OOS 11

Search This thread

Mohitash

Senior Member
Aug 8, 2012
2,783
5,267
Panchkula, Chandigarh
OnePlus 7 Pro
oxypluslogo.png

Introduction to the features that come with this mod [Now supports all OnePlus 7 Series Devices]​


>Many Kernel, CPU, and GPU Tweaks
>Doze Tweaks
>ZRAM Tweaks
>Prop Tweaks
>QS Blur Backgrou
>Focused on Battery, performance, and Smooth UI all together
>AdAway
>Busybox Android NDK
>Viper4Android
>Around 70 different fonts
>Dedicated Gaming Mode for Gamers
>Different Oxygen Profiles to apply accords to your need.
>Display Refresh Rate options
>SELinux Status change options
>Custom WIndow Animation Scales
>StatusBar Clock position change options
>CallScreen Caller ID options
>Disable Flag Secure
>Disable Signature Verification
>And more...

OnePlus 7 device users other than 7 Pro will miss:
-Full-Screen Caller ID
-Disable Signature Verification


Mod comes with the "OxyPlus" App with it. And features are as follows-​


1. Oxygen Profiles*-
>>Battery Profile- This is for battery backup regardless of any performance loss.
>>Balanced Profile- This is for a nice balance between battery and performance.
>>Extreme Profile- This is for Nicest Performance with nice battery but not good as in balanced.
>>Aggressive Profile- For more good performance regardless of battery backup
>>Gaming Mode- Only for Gamers, this will give great performance in Games even on low battery. Not recommended for daily use and also not compatible with Fnatic Mod

2. Disable Profiles*- >Disable Profiles- This is will disable any applied profile but some tweaks will be still alive that comes with Magisk module >Uninstall Oxy- This will completely uninstall Oxygen Expansion

3. Display Refresh Rate*- Here you can change your device's display refresh rate that includes 90Hz forced

4. SELinux Status*

5. Custom WIndow Animation Scales*

6. StatusBar Clock Mod*- options to set status bar clock at the center, at right, or stock

7. Caller ID Screen*- Option to enable fullscreen caller id or stock caller id

8. Framework Options- Option to select from disable signature verification or disable secure flag

9. Theming-

9b. Change Bootanimation
9c. Change Finger On Display Icon
9d. QS Tiles and Notification background options
9e. Themes - Here you can find custom themes that comes with this mod [Follow screenshots below to see]
9f. Disable Themes - This will Disable Themes completely that comes with this mod and you will have an option to re-enable themes.

9.1 Themes comes with-
-Fingerprint Animation
-Fingerprint icon
-AOD Clock
-Nice QS Panel
-System-wide theme color
-Black Qs Panel, Notifications, Settings, and in some areas system-wide
-Themed Warp Charging Animation
-Front Camera Animation theme color

10. FOD Icons*- Different Fingerprint On Display Icons available to apply

NOTE:
>Theme color in QS Panel will not change automatically, you can find theme color in Settings. Apply from there (Named as Green (Bug)
>Also, the AOD clock can be selected from Settings only (Not automatic). But once selected, the same will replaces by the next theme you apply.



>Install Overlay Mount Fix Magisk Module for OxyMod themes to work properly


10. System Options- Option to Reboot in Recovery and Restart SystemUI

11. Logs* - here you can see complete logs from the last applied Profile and also you can check changes you have done from the app since installed.

More Options are there. Please go through changelogs

Options marked with " * " don't need a reboot to take effect or to see the changes.


be-jpg.5529581


Screenshots-​

OxyPlus App ScreenShots-
Screenshot_20220327-184634.jpg

McLaren Theme ScreenShots-

mc.jpg

CyberPunk Theme ScreenShots-

cp.jpg

StarWars Theme ScreenShots-

sw.jpg

PacMan Theme ScreenShots-

pm.jpg

Installation-​


1. Install in Magisk Manager
2. Read everything
3. Select Option when asked
4. Reboot device
5. Open the OxyPlus app and give root permission
6. Do your changes according to your needs.

The installation will detect any conflictions or any old versions to remove that automatically before installing further.


Notes:​

1. Magisk Module comes with some tweaks within the Module for a smoother experience.
2. Oxygen Profile need to be applied manually for the first time from the app and then any applied profile will automatically get applied after any reboot.
3. It is recommended to use with stock kernel but you can try with a different kernel that comes with governers- schedutil, conservative, powersave and performance



Downloads-

Device Support-
For OP7Pro OOS 11.0.7.1 [Not for 11.0.8.1]
For OP7/7T/7TPro OOS 11.0.7.1-11.0.8.1

Link to latest Oxygen Expansions
The Latest Build is v3.0.0
[Full Package]


Link to latest OxyPlus Tinting Mod + More

Device Support - Any OnePlus Device with OOS 11
Download here


Addons-

Double Tap StatusBar To Sleep/Lock
Download here

=================

Official Telegram Group



=================


Want to support with a donation?

Well, it's not necessary but donations are always welcome, this makes project support great.

Donate Via ByMeACoffe

Donate Via Google PlayStore

====================

CREDITS:​

A BIG THANK YOU to A Developer @topjohnwu - the founder of Magisk.
Magisk is like A God to all Android Modding world right now and the main feature is System-Less (It defines itself). On the other side, it comes with a lot of features...
@fOmey
@iglitch
@ BlassGo
@ lAlKenDi
@gloeyisk
@Chainfire
@Zackptg5
@osm0sis
@RedSkulxHYDRA
All members of Team- Magisk and more...
 

Attachments

  • oxyplusapp.jpg
    oxyplusapp.jpg
    215 KB · Views: 657
  • Screenshot_20220315-161619.jpg
    Screenshot_20220315-161619.jpg
    340.9 KB · Views: 451
Last edited:

Mohitash

Senior Member
Aug 8, 2012
2,783
5,267
Panchkula, Chandigarh
OnePlus 7 Pro

Notes for Oxygen Expansion [OxyModPlus]​


1)
Install Overlay Mount Fix Module for themes to work properly

==========

2)
After any reboot your dedicated Oxygen Profile will get applied automatically only after unlocking device.

==========

3)
Uninstallation -
In any situation I have given some options to uninstall it
----
Option 1: Disable and Remove OxyMod Module from Magisk (Remove only main OxyMod Module) and reboot.
----
Option 2: You will find "zzzzoxy-files" folder in your phone storage and inside it there is an uninstaller, install that in Magisk and reboot.
----
Option 3: Delete Main Module Folder using any root explorer like "Solid Explorer (free)
----
Option 4: In TWRP delete main module folder
----
Whenever you install OxyMod you can see in Magisk Module List there is one more Module named as OxyMod Helper or OxyMod AutoUninstaller. Dont touch that. That's the module that helps Main Module to work properly and also this is the module that handles all uninstalling methods.
 
Last edited:

Agil1ty

Senior Member
Jan 3, 2010
518
120
34
Drachten
OnePlus 7 Pro
This module gives me some errors when changing from light to dark mode. It doesn't change until I restart the UI in the oxy app. Also text becomes unreadable.

Anyone else also facing this issue? I'm on magisk 24.1 with zygote active.
 

Mohitash

Senior Member
Aug 8, 2012
2,783
5,267
Panchkula, Chandigarh
OnePlus 7 Pro
Yes the first release didn't have that orange accents or the rounded corners.
Second release is not yet officially available here.
It was on Telegram only for few minutes (for 11.0.6.1) and then pulled back because of some issues.
And the thats not just with that orange etc.
Infact with McLaren CyberPunk and StarWars Theme (Selectable within app)
Option for the stock will also be there.
 

Dugaldrob

Member
Feb 27, 2013
40
27
Second release is not yet officially available here.
It was on Telegram only for few minutes (for 11.0.6.1) and then pulled back because of some issues.
And the thats not just with that orange etc.
Infact with McLaren CyberPunk and StarWars Theme (Selectable within app)
Option for the stock will also be there.
Thanks,look forward to the release
 

Mohitash

Senior Member
Aug 8, 2012
2,783
5,267
Panchkula, Chandigarh
OnePlus 7 Pro

Updated to v2.1.2​

-Updated base to OOS 11.0.6.1
-Added support for all 7 Series
-Fixed some bugs with the logs
-Changed Reboot method whenever need, now whenever needed (within app) Device will reboot normally and not Instantly.
-Some new Animations system-wide
-Added option to disable Themes/Re-enable Themes

Added Themes->
-McLaren Theme
-Cyberpunk Theme
-Star Wars Theme

By default comes with StarWars Theme and OxyMod bootanimation

The theme comes with-
-Fingerprint Animation
-Fingerprint icon
-AOD Clock
-Nice QS Panel
-System-wide theme color
-Black Qs Panel, Notifications, Settings, and in some areas system-wide.
-Themed Warp Charging Animation
-Front Camera Animation theme color

More Boot Animations added->
-McLaren
-CyberPunk 2077
-WatchDog


NOTE:
>Theme color in QS Panel will not change automatically, you can find theme color in Settings. Apply from there (Named as Green (Bug)
>Also, the AOD clock can be selected from Settings only (Not automatic). But once selected, the same will replaces by the next theme you apply.


>Install Overlay Mount Fix Magisk Module for OxyMod themes to work properly

Screenshots are in first post

==========

OnePlus 7 device users other than 7 Pro will miss->
-Full-Screen Caller ID
-Disable Signature Verification


==========

Download Link updated
 
Last edited:
  • Like
Reactions: lordodin912

Top Liked Posts

  • There are no posts matching your filters.
  • 1

    v3.0.0​



    Full Package
    -Re-Based on v2.5.0
    -Removed Analytics Remover [Giving Issues with SafetyNet and Root]
    -Removed some FPS Prop Tweaks [Giving Issues with SafetyNet and Root]
    -Removed all Theme stuff- OxyThemes, Bootanimations, FOD Icons, QS Background Blur, QS Panel Buttons tweak, Notification Style options
    --You can have a separated Magisk Module for these things that can be downloaded from App or from OP. And as always, the Module link will be available in the Telegram group
    -File size decreases by ~200MB
    -In installation now you have an option to select yes or no for Stage 2 Optimization to do while installation or not. In fact that you will be having the option for this optimization within the app so you can do it anytime whenever you need it or whenever you can.
    -Device Boots faster with this mod than previous builds.
    -You may experience nice smooth responsiveness
    -Some More fixes
    -All others are the same as in v2.5.0

    Installation:
    -Install in Magisk Manager
    -Installation will check for any old versions and will remove conflict before installing
    -Installation can take up to 3 minutes maximum if selected only stage 1. Please be patient.
    -When complete, Reboot the device, Open the app give root permissions and do things [If you were having any profile enabled earlier then again You need to apply the Oxygen profile again after every update]

    Regards
    1
    ➕Oxygen Expansions Addon➕

    🔥Double Tap StatusBar To Sleep/Lock🔥

    =======

    Install in Magisk Manager

    =======

    -It will detect Supported device (OP7/T/Pro all variants)
    -It will detect Oxygen Expansion
    -Then starts extracting and merging files to Oxygen Expansions
    -After reboot this addon module will get self removed (UseLess)

    =======

    After install and reboot, StatusBar clock will be back at left (Stock). You can change again.

    =======

    Download

    Direct Link

    =======

    With Regards
    1

    🔧✅Call Recording Fix ✅🔧


    For Oxygen Expansions v250/252/300

    Install in Magisk Manager and reboot device

    It will detect Oxygen Expansions module will do the fix in that.

    This fix module will get Self removed after reboot (Useless)


    -With Regards
    1
    Hi everyone,

    As you all know OOS 11.0.8.1 is here.

    In the latest 11.0.8.1, framework has been patched.

    So here is some information yoy must know

    For only OP7 Pro-

    Disable flag secure partially and Disable signature verification not working and Give Results in bootloop

    Please wait for the update for 11.0.8.1 or be with Disable Secure Flag only
    And if you are on 11.0.7.1 then you can still use the mod.

    =======

    Users with OP7/OP7T/OP7T Pro can use this on OOS 11.0.8.1
    Reason:
    1.You don't have Disable Signature Verification Option
    2. Disable Flag secure works live by doing patching work to your system framework file while installation itself and then installs the patched framework file systemlessly within module

    Thank you

    -With Regards
    1
    Hello, any chance we get this on the op8pro?
    Not soon
  • 6
    oxypluslogo.png

    Introduction to the features that come with this mod [Now supports all OnePlus 7 Series Devices]​


    >Many Kernel, CPU, and GPU Tweaks
    >Doze Tweaks
    >ZRAM Tweaks
    >Prop Tweaks
    >QS Blur Backgrou
    >Focused on Battery, performance, and Smooth UI all together
    >AdAway
    >Busybox Android NDK
    >Viper4Android
    >Around 70 different fonts
    >Dedicated Gaming Mode for Gamers
    >Different Oxygen Profiles to apply accords to your need.
    >Display Refresh Rate options
    >SELinux Status change options
    >Custom WIndow Animation Scales
    >StatusBar Clock position change options
    >CallScreen Caller ID options
    >Disable Flag Secure
    >Disable Signature Verification
    >And more...

    OnePlus 7 device users other than 7 Pro will miss:
    -Full-Screen Caller ID
    -Disable Signature Verification


    Mod comes with the "OxyPlus" App with it. And features are as follows-​


    1. Oxygen Profiles*-
    >>Battery Profile- This is for battery backup regardless of any performance loss.
    >>Balanced Profile- This is for a nice balance between battery and performance.
    >>Extreme Profile- This is for Nicest Performance with nice battery but not good as in balanced.
    >>Aggressive Profile- For more good performance regardless of battery backup
    >>Gaming Mode- Only for Gamers, this will give great performance in Games even on low battery. Not recommended for daily use and also not compatible with Fnatic Mod

    2. Disable Profiles*- >Disable Profiles- This is will disable any applied profile but some tweaks will be still alive that comes with Magisk module >Uninstall Oxy- This will completely uninstall Oxygen Expansion

    3. Display Refresh Rate*- Here you can change your device's display refresh rate that includes 90Hz forced

    4. SELinux Status*

    5. Custom WIndow Animation Scales*

    6. StatusBar Clock Mod*- options to set status bar clock at the center, at right, or stock

    7. Caller ID Screen*- Option to enable fullscreen caller id or stock caller id

    8. Framework Options- Option to select from disable signature verification or disable secure flag

    9. Theming-

    9b. Change Bootanimation
    9c. Change Finger On Display Icon
    9d. QS Tiles and Notification background options
    9e. Themes - Here you can find custom themes that comes with this mod [Follow screenshots below to see]
    9f. Disable Themes - This will Disable Themes completely that comes with this mod and you will have an option to re-enable themes.

    9.1 Themes comes with-
    -Fingerprint Animation
    -Fingerprint icon
    -AOD Clock
    -Nice QS Panel
    -System-wide theme color
    -Black Qs Panel, Notifications, Settings, and in some areas system-wide
    -Themed Warp Charging Animation
    -Front Camera Animation theme color

    10. FOD Icons*- Different Fingerprint On Display Icons available to apply

    NOTE:
    >Theme color in QS Panel will not change automatically, you can find theme color in Settings. Apply from there (Named as Green (Bug)
    >Also, the AOD clock can be selected from Settings only (Not automatic). But once selected, the same will replaces by the next theme you apply.



    >Install Overlay Mount Fix Magisk Module for OxyMod themes to work properly


    10. System Options- Option to Reboot in Recovery and Restart SystemUI

    11. Logs* - here you can see complete logs from the last applied Profile and also you can check changes you have done from the app since installed.

    More Options are there. Please go through changelogs

    Options marked with " * " don't need a reboot to take effect or to see the changes.


    be-jpg.5529581


    Screenshots-​

    OxyPlus App ScreenShots-
    Screenshot_20220327-184634.jpg

    McLaren Theme ScreenShots-

    mc.jpg

    CyberPunk Theme ScreenShots-

    cp.jpg

    StarWars Theme ScreenShots-

    sw.jpg

    PacMan Theme ScreenShots-

    pm.jpg

    Installation-​


    1. Install in Magisk Manager
    2. Read everything
    3. Select Option when asked
    4. Reboot device
    5. Open the OxyPlus app and give root permission
    6. Do your changes according to your needs.

    The installation will detect any conflictions or any old versions to remove that automatically before installing further.


    Notes:​

    1. Magisk Module comes with some tweaks within the Module for a smoother experience.
    2. Oxygen Profile need to be applied manually for the first time from the app and then any applied profile will automatically get applied after any reboot.
    3. It is recommended to use with stock kernel but you can try with a different kernel that comes with governers- schedutil, conservative, powersave and performance



    Downloads-

    Device Support-
    For OP7Pro OOS 11.0.7.1 [Not for 11.0.8.1]
    For OP7/7T/7TPro OOS 11.0.7.1-11.0.8.1

    Link to latest Oxygen Expansions
    The Latest Build is v3.0.0
    [Full Package]


    Link to latest OxyPlus Tinting Mod + More

    Device Support - Any OnePlus Device with OOS 11
    Download here


    Addons-

    Double Tap StatusBar To Sleep/Lock
    Download here

    =================

    Official Telegram Group



    =================


    Want to support with a donation?

    Well, it's not necessary but donations are always welcome, this makes project support great.

    Donate Via ByMeACoffe

    Donate Via Google PlayStore

    ====================

    CREDITS:​

    A BIG THANK YOU to A Developer @topjohnwu - the founder of Magisk.
    Magisk is like A God to all Android Modding world right now and the main feature is System-Less (It defines itself). On the other side, it comes with a lot of features...
    @fOmey
    @iglitch
    @ BlassGo
    @ lAlKenDi
    @gloeyisk
    @Chainfire
    @Zackptg5
    @osm0sis
    @RedSkulxHYDRA
    All members of Team- Magisk and more...
    3

    Update v2.2.2​


    This is an incremental update. You must have v2.2.0 installed already on device before updating to v2.2.2

    -Fixed FOD not working for Non-Pro Series
    -Added QS Tiles options
    -Added Notification Background style options

    Download Link in first post

    With Regards
    1

    Updated to v2.1.2​

    -Updated base to OOS 11.0.6.1
    -Added support for all 7 Series
    -Fixed some bugs with the logs
    -Changed Reboot method whenever need, now whenever needed (within app) Device will reboot normally and not Instantly.
    -Some new Animations system-wide
    -Added option to disable Themes/Re-enable Themes

    Added Themes->
    -McLaren Theme
    -Cyberpunk Theme
    -Star Wars Theme

    By default comes with StarWars Theme and OxyMod bootanimation

    The theme comes with-
    -Fingerprint Animation
    -Fingerprint icon
    -AOD Clock
    -Nice QS Panel
    -System-wide theme color
    -Black Qs Panel, Notifications, Settings, and in some areas system-wide.
    -Themed Warp Charging Animation
    -Front Camera Animation theme color

    More Boot Animations added->
    -McLaren
    -CyberPunk 2077
    -WatchDog


    NOTE:
    >Theme color in QS Panel will not change automatically, you can find theme color in Settings. Apply from there (Named as Green (Bug)
    >Also, the AOD clock can be selected from Settings only (Not automatic). But once selected, the same will replaces by the next theme you apply.


    >Install Overlay Mount Fix Magisk Module for OxyMod themes to work properly

    Screenshots are in first post

    ==========

    OnePlus 7 device users other than 7 Pro will miss->
    -Full-Screen Caller ID
    -Disable Signature Verification


    ==========

    Download Link updated
    1
    Hi,
    Just tried on my 7T Pro, work fine but only black screen on all games. I uninstall it then it work again. Any fix plz?
    Thank's

    that must be old games [not updated]

    Try theme fix 2 from Tegram Group and link to that is available in ButetrsExtended Thread

    With Regards
    1
    Hello, any chance we get this on the op8pro?
    Not soon