[marmite] How to flash Wileyfox Swift 2/2 Plus/2 X via fastboot

[JavaVOBIS]

At the moment I'm just starting to write this guide. My English is bad , so please help me: write down the mistakes I made and how to fix them. :highfive:
Software

ADB/Fastboot
Drivers for ADB/Fastboot
Flash.bat
Needed firmware (now i recomend install TOS373J)

Remember! With firmware you will lose all your data!
Installing

1. Unpack adb.zip and flash.zip to C:\Android
2. Unpack your shoosen firmware to C:\Android
3. Open developer options and turn on "OEM unlocking"
4. Power off smartphone,press "+" and "power"
5. Connect smartphone to PC and install drivers
6. Open cmd and write "cd C:\Android"
7. Next "fastboot oem unlock" and accept on display of smartphone
8. After reboot power off smartphone and press "+" and "power"
9. Write "fastboot flashing unlock_critical" and accept on display of smartphone
10. Open flash.bat in C:\Android and press "enter"
11. Wait when flashing finish and disconnect smartphone
12. After flash finishing write "fastboot flashing lock_critical" and wait reboot
13. Next boot to fastboot and write "fastboot oem lock" and wait reboot

 

[Kenif1983]

I'm trying to use this on my swift 2 (Oreo) I get a lot of errors when I run flash.bat.

---------- Post added at 08:54 PM ---------- Previous post was at 08:47 PM ----------

Are there commands to flash the image via cmd?

 

[JavaVOBIS]

I'm trying to use this on my swift 2 (Oreo) I get a lot of errors when I run flash.bat.

---------- Post added at 08:54 PM ---------- Previous post was at 08:47 PM ----------

Are there commands to flash the image via cmd?

Need flash via cmd.exe.