MCU/Android Update to 9.0 - AllWinner T3 P3 Quad Core 16GB 2GB 1024x600 Android 7.1.1

[Tartalatrance]

Hello everyone,

After big research on XDA forum and 4pda.ru, I come here to ask for your help.

I have a Xomax XM-DA708 headunit :
CHIPSET : AllWinner T3 P3 Quad Core - ROM 16GB - DDR3 2GB - 1024x600
ANDROID VERSION : 7.1.1
KERNEL VERSION : Linux 3.10.65 - Tue Sep 25 10:47:25 CST 2018
OS VERSION : BSP 2.3.4.3.12 - IVT - 180925
MCU VERSION : 20180725-5-KC1-12
CAN VERSION : ---
BT Version : 3A03

I know that the Xomax XM-DA708 is now sold with Android 9.0 but the support keep saying that the headunit version is fixed and can't be upgraded.

I don't know anything on the headunits udpates etc. but what I understood (with my research on XDA and 4pda.ru) is that I have just to find a MCU update on internet that fit with my headunit (AllWinner T3 P3), put it on a SD card and install it on my device.
Because I'm scared to brick my device, I ask to this forum if :

1- Have I well understood the process ?
2- Do you have a link to a downloadable new version of MCU/Android 8.1 or 9.0 that fit with my headunit ?

Thanks in advance !

 

[Tartalatrance]

AIDA64 report

Fabricant: Allwinner
Modéle: QUAD-CORE T3 p3
Marque: Allwinner
Carte Mère: exdroid
Appareil: t3-p3
Matériel: sun8iw11p1
Plateforme: t3
Produit: t3_p3
Num Série: 110100303136473330005d47d2ad754b
RAM Installée: 2 Go
Mémoire Totale: 1768 Mo
Mémoire Disponible: 932 Mo
Total Espace Stockage Interne: 10,88 Go
Espace Stockage Interne Libre: 7806 Mo
Fonctionnalités: android.hardware.audio.output
android.hardware.camera
android.hardware.camera.any
android.hardware.camera.front
android.hardware.ethernet
android.hardware.faketouch
android.hardware.location
android.hardware.location.gps
android.hardware.location.network
android.hardware.microphone
android.hardware.screen.landscape
android.hardware.screen.portrait
android.hardware.sensor.accelerometer
android.hardware.touchscreen
android.hardware.touchscreen.multitouch
android.hardware.touchscreen.multitouch.distinct
android.hardware.usb.accessory
android.hardware.usb.host
android.hardware.wifi
android.hardware.wifi.direct
android.software.app_widgets
android.software.backup
android.software.connectionservice
android.software.device_admin
android.software.home_screen
android.software.input_methods
android.software.live_wallpaper
android.software.managed_users
android.software.midi
android.software.print
android.software.sip
android.software.sip.voip
android.software.voice_recognizers
android.software.webview

<<< CPU >>>

Core Architecture: 4x ARM Cortex-A7 @ 1200 MHz
Jeu d'instructions: 32-bits ARMv7
CPU Revision: r0p5
Coeurs CPU: 4
Fréquence CPU: 480 - 1200 MHz
Core 1 Fréquence: 1200 MHz
Core 2 Fréquence: 1200 MHz
Core 3 Fréquence: 1200 MHz
Core 4 Fréquence: 1200 MHz
Utilisation CPU: 40 %
ABIs Supportés: armeabi-v7a, armeabi
32-bit ABIs Supportés: armeabi-v7a, armeabi
AES: Non Supporté
NEON: Supporté
SHA1: Non Supporté
SHA2: Non Supporté

<<< Affichage >>>

Résolution Ecran: 1024 × 600
Taille Ecran: 154 mm × 86 mm
Diagonale Ecran: 6,94 pouces
Densité Pixel: 171 dpi (mdpi)
xdpi / ydpi: 169 / 177 dpi
Fournisseur GPU: ARM
GPU Renderer: Mali-400 MP
Taux de Rafraîchissement: 59 Hz
Orientation par Défaut: Paysage
Version OpenGL ES: 2.0
Version GPU: OpenGL ES 2.0
Extensions OpenGL ES: GL_EXT_debug_marker
GL_OES_texture_npot
GL_OES_vertex_array_object
GL_OES_compressed_ETC1_RGB8_texture
GL_EXT_compressed_ETC1_RGB8_sub_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_OES_vertex_half_float
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_OES_rgb8_rgba8
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer
GL_OES_get_program_binary
GL_ARM_mali_program_binary
GL_EXT_shader_texture_lod
GL_EXT_robustness
GL_OES_depth_texture_cube_map
GL_KHR_debug
GL_ARM_shader_framebuffer_fetch
GL_ARM_shader_framebuffer_fetch_depth_stencil
GL_OES_mapbuffer

<<< Réseau >>>

<< Telephonie >>
Type Téléphone: Aucun

<< Wi-Fi >>
Etat: Activé
SSID: "Hotspot mobile Edouard"
BSSID: 6e:c7:ec:1d:e3:76
SSID Masqué: Non
Addresse IPv4: 192.168.43.110
Addresse IPv6: 2a04:cec0:100b:6f39:c806:a65d:60a:46e7
Force du Signal: -47 dBm (Excellent)
Vitesse: 72 Mb/s
Frequence: 2437 MHz
ID Réseau: 0
Passerelle: 192.168.43.1
Masque de Sous-Reseau: 255.255.255.0
DNS1: 192.168.43.1
Durée Bail DHCP: 1 heure
Bande 5 GHz: Non Supporté
Wi-Fi Aware: Non Supporté
Wi-Fi Direct: Supporté

<<< Batterie >>>

Source Alimentation: Chargeur Secteur
Niveau: 100 %
Statut: En Chargement
Santé: Bon
Température: 42,4°C
Capacité (Reportée par Android): 2850 mAh

<<< Android >>>

Version Android: 7.1.1 (Nougat)
Niveau API: 25
Niveau du correctif de sécurité Android: 2017-03-05
Appareil rooté: Oui
ID Android: d8a19f9cdd4d08d7
ID de Build: t3_p3-eng 7.1.1 NMF27D 20180925 test-keys
nom de Code: REL
Empreinte Digitale: Allwinner/t3_p3/t3-p3:7.1.1/NMF27D/20180925:eng/test-keys
ID: NMF27D
Incremental: 20180925
Version Java Runtime: Android Runtime 0.9
Version Machine Virtuelle Java: ART 2.1.0
Taille du Heap Java VM: 192 Mo
Architecture Kernel: armv7l
Version du Kernel: 3.10.65 (release@BHDS02) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #1168 SMP PREEMPT Tue Sep 25 10:47:25 CST 2018
Tags: test-keys
Type: eng
Version du Service Google Play: 19.2.75 (040300-269183835)
Version OpenSSL: BoringSSL
Version ZLib: 1.2.8
Version ICU CLDR: 28.0
Version Librairie ICU: 56.1
Version Unicode ICU: 8.0
Langage Android: français (France)
Configured Time Zone: heure d’été d’Europe centrale (UTC+02:00)
Temps total activé: 00:05:15

 

[ahmed68]

Hello everyone,

After big research on XDA forum and 4pda.ru, I come here to ask for your help.

I have a Xomax XM-DA708 headunit :
CHIPSET : AllWinner T3 P3 Quad Core - ROM 16GB - DDR3 2GB - 1024x600
ANDROID VERSION : 7.1.1
KERNEL VERSION : Linux 3.10.65 - Tue Sep 25 10:47:25 CST 2018
OS VERSION : BSP 2.3.4.3.12 - IVT - 180925
MCU VERSION : 20180725-5-KC1-12
CAN VERSION : ---
BT Version : 3A03

I know that the Xomax XM-DA708 is now sold with Android 9.0 but the support keep saying that the headunit version is fixed and can't be upgraded.

I don't know anything on the headunits udpates etc. but what I understood (with my research on XDA and 4pda.ru) is that I have just to find a MCU update on internet that fit with my headunit (AllWinner T3 P3), put it on a SD card and install it on my device.
Because I'm scared to brick my device, I ask to this forum if :

1- Have I well understood the process ?
2- Do you have a link to a downloadable new version of MCU/Android 8.1 or 9.0 that fit with my headunit ?

Thanks in advance !

sun8iw11p1_KC1C01W1.img
MCU: STM32-20190828-11-KC1-30
https://cobaltr4.ru/ск…nqi-allwinner-t3/#_MCU

 

[Tartalatrance]

Thank you !
I'll test it and will bring you some news

 

[Tartalatrance]

Hello,

I have put the files in a formatted SD Card (FAT32).
I start the device and introduce the SD card in the GPS slot.
But unfortunately, nothing happens (it's just saying "no music files")
Normally, a menu should appears...

I also tried with a USB device and tried an other SD Card slot on the device (I have 2 slots).

Do you have a solution to force the device to update on these files ?

 

[mariusvaszi1971]

Hello
I have the same configuration in GU only that it is Bosion 2 Din.
I have put on usb the files recommended by Ahmed68 on 4pda and the mcu files are not seen (because they are .upd files), if I change from .upd to .img it sees them but the installation stops at 7%, the os_update file installs but after restart tells me that this update is for T3 P1 and I have T3p3.
Dear Mr. Ahmed68 do you think you can help me with the installation please?
Sorry for bad language for google translation.
Thanks in advance.

 

[ahmed68]

Hello
I have the same configuration in GU only that it is Bosion 2 Din.
I have put on usb the files recommended by Ahmed68 on 4pda and the mcu files are not seen (because they are .upd files), if I change from .upd to .img it sees them but the installation stops at 7%, the os_update file installs but after restart tells me that this update is for T3 P1 and I have T3p3.
Dear Mr. Ahmed68 do you think you can help me with the installation please?
Sorry for bad language for google translation.
Thanks in advance.

u need this one
https://cobaltr4.ru/восстановление-магнитолы-wanqi-allwinner-t3-p1-из-сост/

 

[mariusvaszi1971]

thank you very much for your help !

 

[Tartalatrance]

mariusvaszi1971
You simply changed the name from upd to img and it worked ?

 

[mariusvaszi1971]

change the termination in .img did not work, but I received from ahmed68 mcu and os update for my radio and the installation went very well.
Thanks again Ahmed!

 

[Tartalatrance]

If I understand well, the sun8iw11p1_KC1C01W1.zip and the mcu-201907121001KC-10-10 - 件 (2) .upd from this link : https://cobaltr4.ru/восстановление-м...из-сост/ are working without any modification.

Just put it in a SD card and it's done ?

 

[mariusvaszi1971]

If I understand well, the sun8iw11p1_KC1C01W1.zip and the mcu-201907121001KC-10-10 - 件 (2) .upd from this link : https://cobaltr4.ru/восстановление-м...из-сост/ are working without any modification.

Just put it in a SD card and it's done ?

I used this link https://yadi.sk/d/Dz9aThzMlze1ZA
and this is the result after the upgrade
https://cdn1.imggmi.com/uploads/2019/10/9/280d2ee3a26fc3cdda8d11a2e9a5f8ae-full.jpg
https://cdn1.imggmi.com/uploads/2019/10/9/98e1e467510633f768d2d856e4a20359-full.jpg

 

[Tartalatrance]

Great !
Thank you !

I'll test it as soon as I can

 

[Tartalatrance]

Arg...
The MCU update was OK but the Android did not work.
My head unit start but I have no screen and no functionality at all any more...
I know that it's starting because the radio turned on.

Seems that it's dead now

Do you know if there is a method to launch directly with an android update ?

 

[ahmed68]

Arg...
The MCU update was OK but the Android did not work.
My head unit start but I have no screen and no functionality at all any more...
I know that it's starting because the radio turned on.

Seems that it's dead now

Do you know if there is a method to launch directly with an android update ?

meby you have different relesion of lcd (1024*600 or 800*480) all firmware for T3 here you must flash by sd card I don't now wich one for your unit
https://yadi.sk/d/07ru92rb3HEh73

 

[Tartalatrance]

Hello ahmed,

Thank you for your answer.

One question : how am I suppose to flash by SD if I can't enter the update menu because I don't have access to the screen ?
I see this kind of screen at startup : https://www.budandtonystruckparts.c...0005602_345x-355-kenworth-bug-screen_550.jpeg

Thank you again.

 

[EndlessAbyss]

CLarion HU update to android

meby you have different relesion of lcd (1024*600 or 800*480) all firmware for T3 here you must flash by sd card I don't now wich one for your unit
https://yadi.sk/d/07ru92rb3HEh73

I'm wondering if anybody can help me with a way to install Android Auto on my HU.

It's a Clarion head unit with the below info:

Version:

WOS_A6_V1.00.0_6338_20170220
EB2CLS_A600D_20170220
APP_V 4.2.8_0CB6_170120
MCU_V 4.4.13_0CB6_170710
Mpeg_V

https://imgur.com/TzJoedc

I'd really appreciate any links to firmware.

 

[ahmed68]

Hello ahmed,

Thank you for your answer.

One question : how am I suppose to flash by SD if I can't enter the update menu because I don't have access to the screen ?
I see this kind of screen at startup : https://www.budandtonystruckparts.c...0005602_345x-355-kenworth-bug-screen_550.jpeg

Thank you again.

APP upgrade Manual
Prepared one U disk or sd card, (Note: The SD or USB only can have one software.)
1. Update the APP, Directly Copy the file to SD or USB .Don't unzip the files.
2.Turn on the car radio,insert the USB or SD, Then it will Automatically Update
if doesn't work use Phoenixcard or PhoenixSuit

 

[Tartalatrance]

APP upgrade Manual
Prepared one U disk or sd card, (Note: The SD or USB only can have one software.)
1. Update the APP, Directly Copy the file to SD or USB .Don't unzip the files.
2.Turn on the car radio,insert the USB or SD, Then it will Automatically Update
if doesn't work use Phoenixcard or PhoenixSuit

Hello, apparently, nothing happens.
I copied the os_update_KC1C0101-M01-2.0.4.1.10_20171106_143208.zip from the APP folder of one of the downloadable link and put it in a USB key.
I've tried to start up with it and plug in it after the start up.

 

[ahmed68]

Hello, apparently, nothing happens.
I copied the os_update_KC1C0101-M01-2.0.4.1.10_20171106_143208.zip from the APP folder of one of the downloadable link and put it in a USB key.
I've tried to start up with it and plug in it after the start up.

1.
http://4pda.ru/forum/index.php?showtopic=840515&view=findpost&p=65828762
2.
http://4pda.ru/forum/index.php?showtopic=806442&view=findpost&p=61631085
3.
http://4pda.ru/forum/index.php?showtopic=736165&view=findpost&p=50105910
4.
http://4pda.ru/pages/go/?u=http://ublaze.ru/forum/viewtopic.php?p=15816#p15816&e=61449401