[MCU] Universal MCU-List

[typos1]

@typos1, can it be MCU fault ?
Originally I had KLD 6 2.87, then I upgraded to KLD 9 because or radio stations stored...
When doing MIC mod I noticed that external mic is not working, just internal one, can this be MCU related or not, or the mic didn't work from begining...?

I tried which mic is working with recording app.

I wouldnt have thought it would be anything to do with the MCU, but theres one way to find out for sure - change the MCU, if the mic works, then its the MCU !

 

[leo-balaskas]

Hello- i have:

RK3188
MTCB KLD2 - V2.77
Malaysk 4.4.4

Can I upgrade my MCU? Which one is the best for my Situation? Since newest Malaysk my Radio Signal is really bad.

 

[pcmender2005]

Hello- i have:

RK3188
MTCB KLD2 - V2.77
Malaysk 4.4.4

Can I upgrade my MCU? Which one is the best for my Situation? Since newest Malaysk my Radio Signal is really bad.

Yes you can but make sure you have a copy of the one you already running. But first boot the radio up and goto factory settings code should be 126 and take a pic of all the settings in the tabs as you may need to reset them back after flash of mcu try this version MTCC-KLD9-V2.98.

https://www.dropbox.com/s/zyy9xh73ohg1ux8/MTCC-KLD9-V2.98.zip?dl=0

 

[typos1]

Yes you can but make sure you have a copy of the one you already running. But first boot the radio up and goto factory settings code should be 126 and take a pic of all the settings in the tabs as you may need to reset them back after flash of mcu try this version MTCC-KLD9-V2.98.

https://www.dropbox.com/s/zyy9xh73ohg1ux8/MTCC-KLD9-V2.98.zip?dl=0

Or simply use the MCU.cfg option which backs up your MCU config settings and then you flash it after flashing a new MCU.

 

[TeddyVee]

very nice list !

In this message, I'll lay out all the latest versions MCU for all the units​

MCU is suitable for RK3066 and RK3188 !!!​

How do I know which version of MCU you have installed?​

For information about your MCU (which you need) can be found in Settings - About tablet - 3rd line where there is a word MCU.​

For KLD
KLD v.1.98 for those who have turned off the unit for 2-4 seconds. when you turn the ignition key to the MCU above 1.98 - View attachment 3358334

KLD v.2.55 from sleep mode - View attachment 3358305

KLD v.2.55 with sleep and redesigned sound processor from darkleo from 19.06.2015 - View attachment 3370738

KLD v.2.64 from sleep mode - HERE

KLD v.2.64 with sleep and redesigned sound processor from darkleo - HERE

KLD v.2.78 from sleep mode - HERE


FOR KLD 1
KLD1 v.2.55 with sleep and redesigned sound processor from darkleo - View attachment 3370741
KLD1 v.2.55 factory - HERE
KLD1 v.2.67 - HERE


FOR KLD 2
KLD2 v.2.51 - Here
KLD2 v.2.55 with sleep and redesigned sound processor from darkleo - View attachment 3370742
KLD2 v.2.55 factory - HERE
KLD2 v.2.67 factory - HERE
KLD2 v.2.72 factory - HERE
KLD2 v.2.77 factory - HERE
KLD2 v.2.81 factory - HERE

FOR KLD 5
KLD5 v.2.77 - Here

FOR KLD 6
KLD6 v.2.83 - Here
KLD6 v.2.85 - Here

FOR JY
JY v.2.59 -View attachment 3358303
JY v.2.59 with sleep and redesigned sound processor from darkleo from 19.06.2015 - View attachment 3370740
JY v.2.73 - Here
JY v.2.86 - Here

FOR KGL
KGL v.2.53 - View attachment 3358356

KGL v.2.55 with sleep and redesigned sound processor from darkleo - View attachment 3370731

KGL v.2.64 with sleep and redesigned sound processor from darkleo - HERE

KGL v.2.59 - HERE - Universal version for KGL 0-5. Then go to the factory settings and set its type buttons

KGL v.2.72 - HERE - Universal version for KGL 0-5. Then go to the factory settings and set its type buttons

KGL v.2.80 - HERE
KGL v.2.83 - HERE- Universal version for KGL 0-5. Then go to the factory settings and set its type buttons

FOR KGL 1
KGL1 v.2.53 - View attachment 3358314

KGL1 v.2.55 with sleep and redesigned sound processor from darkleo - View attachment 3370732

FOR KGL 2
KGL2 v.2.53 - View attachment 3358315

KGL2 v.2.55 with sleep and redesigned sound processor from darkleo - View attachment 3370733

FOR KGL 3
KGL3 v.2.68 - HERE
KGL3 v.2.84 - HERE


FOR KGL 4
KGL4 v.2.53 - View attachment 3358317

KGL4 v.2.55 with sleep and redesigned sound processor from darkleo - View attachment 3370734

FOR KGL 5
KGL5 v.2.53 - View attachment 3358318

KGL5 v.2.55 with sleep and redesigned sound processor from darkleo - View attachment 3370736

FOR GS
GS v.2.55 with sleep and redesigned sound processor from darkleo - View attachment 3370737
GS v.2.73 - here

FOR KYD
KYD v.2.55 with sleep and redesigned sound processor from darkleo - View attachment 3373782
KYD v.2.59 with sleep - here
KYD v.2.83 - here

FOR BN and HA
BN v.2.43 - here
BN v.2.55 with sleep and redesigned sound processor from darkleo - View attachment 3374877
HA-BN v.2.60 with sleep - here
HA-BN v.2.67 - HERE
HA-BN v.2.73 - HERE
HA-BN v.2.80 - HERE
HA-BN v.2.83 - HERE
HA-BN v.2.85 - HERE

FOR MX
MX v.2.55 - here
MX v.2.67 - here
MX v.2.82 - here

FOR MD
MD v.2.67 - here

FOR KD
KD v.2.81 - here

FOR KSP
KSP v.2.68 - HERE
KSP v.2.79 - HERE
KSP v.2.89 - HERE

FOR INFORMATION:
MCU BN and HA are fully compatible

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Which one would you recommend for MCU version MTCD_KLD_V2.00c_1

 

[leo-balaskas]

Yes you can but make sure you have a copy of the one you already running. But first boot the radio up and goto factory settings code should be 126 and take a pic of all the settings in the tabs as you may need to reset them back after flash of mcu try this version MTCC-KLD9-V2.98.

https://www.dropbox.com/s/zyy9xh73ohg1ux8/MTCC-KLD9-V2.98.zip?dl=0

Or simply use the MCU.cfg option which backs up your MCU config settings and then you flash it after flashing a new MCU.

Thank you, I made Screenshots and flashed. After that i wiped data so i needed to install xposed. Since then The unit Boot up, shows screen and then gets in Logo bootloop. Any ideas? I reflashed malaysk several ttimes with full wipe but still the same problem. After normal Boot 1 second Logo bootloop.

 

[typos1]

Which one would you recommend for MCU version MTCD_KLD_V2.00c_1

The first thing I recommend is that you remove the unnecessarily long quote, please.

The second thing is that you look in the MTCD forum, not the MTCB/C one, for your MCU.

 

[pcmender2005]

Thank you, I made Screenshots and flashed. After that i wiped data so i needed to install xposed. Since then The unit Boot up, shows screen and then gets in Logo bootloop. Any ideas? I reflashed malaysk several ttimes with full wipe but still the same problem. After normal Boot 1 second Logo bootloop.

Hiya mate try MTCB-KLD6-V2.85.

 

[leo-balaskas]

Hiya mate try MTCB-KLD6-V2.85.

Reflashed 2.98 no bootloop anymore. but when i am installing xposed moduls -> bootloop again.
guess i have to try 2.85 -> do you have a download link, too?

Radio Signal is anyway still bad- but could also be a Car Problem.

 

[pcmender2005]

Reflashed 2.98 no bootloop anymore. but when i am installing xposed moduls -> bootloop again.
guess i have to try 2.85 -> do you have a download link, too?

Radio Signal is anyway still bad- but could also be a Car Problem.

Try this link mate https://yadi.sk/d/zvOjCPV8qG5Yp

 

[TeddyVee]

In this message, I'll lay out all the latest versions MCU for all the units​

MCU is suitable for RK3066 and RK3188 !!!​

How do I know which version of MCU you have installed?​

For information about your MCU (which you need) can be found in Settings - About tablet - 3rd line where there is a word MCU.​

For KLD
KLD v.1.98 for those who have turned off the unit for 2-4 seconds. when you turn the ignition key to the MCU above 1.98 - View attachment 3358334

KLD v.2.55 from sleep mode - View attachment 3358305

KLD v.2.55 with sleep and redesigned sound processor from darkleo from 19.06.2015 - View attachment 3370738

KLD v.2.64 from sleep mode - HERE

KLD v.2.64 with sleep and redesigned sound processor from darkleo - HERE

KLD v.2.78 from sleep mode - HERE


FOR KLD 1
KLD1 v.2.55 with sleep and redesigned sound processor from darkleo - View attachment 3370741
KLD1 v.2.55 factory - HERE
KLD1 v.2.67 - HERE


FOR KLD 2
KLD2 v.2.51 - Here
KLD2 v.2.55 with sleep and redesigned sound processor from darkleo - View attachment 3370742
KLD2 v.2.55 factory - HERE
KLD2 v.2.67 factory - HERE
KLD2 v.2.72 factory - HERE
KLD2 v.2.77 factory - HERE
KLD2 v.2.81 factory - HERE

FOR KLD 5
KLD5 v.2.77 - Here

FOR KLD 6
KLD6 v.2.83 - Here
KLD6 v.2.85 - Here

FOR JY
JY v.2.59 -View attachment 3358303
JY v.2.59 with sleep and redesigned sound processor from darkleo from 19.06.2015 - View attachment 3370740
JY v.2.73 - Here
JY v.2.86 - Here

FOR KGL
KGL v.2.53 - View attachment 3358356

KGL v.2.55 with sleep and redesigned sound processor from darkleo - View attachment 3370731

KGL v.2.64 with sleep and redesigned sound processor from darkleo - HERE

KGL v.2.59 - HERE - Universal version for KGL 0-5. Then go to the factory settings and set its type buttons

KGL v.2.72 - HERE - Universal version for KGL 0-5. Then go to the factory settings and set its type buttons

KGL v.2.80 - HERE
KGL v.2.83 - HERE- Universal version for KGL 0-5. Then go to the factory settings and set its type buttons

FOR KGL 1
KGL1 v.2.53 - View attachment 3358314

KGL1 v.2.55 with sleep and redesigned sound processor from darkleo - View attachment 3370732

FOR KGL 2
KGL2 v.2.53 - View attachment 3358315

KGL2 v.2.55 with sleep and redesigned sound processor from darkleo - View attachment 3370733

FOR KGL 3
KGL3 v.2.68 - HERE
KGL3 v.2.84 - HERE


FOR KGL 4
KGL4 v.2.53 - View attachment 3358317

KGL4 v.2.55 with sleep and redesigned sound processor from darkleo - View attachment 3370734

FOR KGL 5
KGL5 v.2.53 - View attachment 3358318

KGL5 v.2.55 with sleep and redesigned sound processor from darkleo - View attachment 3370736

FOR GS
GS v.2.55 with sleep and redesigned sound processor from darkleo - View attachment 3370737
GS v.2.73 - here

FOR KYD
KYD v.2.55 with sleep and redesigned sound processor from darkleo - View attachment 3373782
KYD v.2.59 with sleep - here
KYD v.2.83 - here

FOR BN and HA
BN v.2.43 - here
BN v.2.55 with sleep and redesigned sound processor from darkleo - View attachment 3374877
HA-BN v.2.60 with sleep - here
HA-BN v.2.67 - HERE
HA-BN v.2.73 - HERE
HA-BN v.2.80 - HERE
HA-BN v.2.83 - HERE
HA-BN v.2.85 - HERE

FOR MX
MX v.2.55 - here
MX v.2.67 - here
MX v.2.82 - here

FOR MD
MD v.2.67 - here

FOR KD
KD v.2.81 - here

FOR KSP
KSP v.2.68 - HERE
KSP v.2.79 - HERE
KSP v.2.89 - HERE

FOR INFORMATION:
MCU BN and HA are fully compatible

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Will this work for Eonon 5161w?

 

[typos1]

Will this work for Eonon 5161w?

Theres no such thing, Eonon are sellers not manufacturers, check settings/about device to see what unit you have and also please reduce the size your quote its making the thread unnecessarily long.

 

[TeddyVee]

thanks

Unit
MTCD_KLD_V2.00C_1

Still looking for update

 

[typos1]

Unit
MTCD_KLD_V2.00C_1

Still looking for update

Please reduce the size of your quote in post #711 . . .

 

[TeddyVee]

ok

KLD V2

 

[typos1]

KLD V2

No, not the one you just made, the one in post #711, from @Malaysk that takes up so much room and makes this thread unnecessarily long . . .

 

[gkris]

"Still looking for update"

I believe these are MTCB and MTCC MCU's you can try the MTCD list here https://forum.xda-developers.com/an.../comprehensive-updated-mcu-list-mtcd-t3476880

 

[lord01]

mcu kd

hello, mcu kd compatible with mtcD,thanks

---------- Post added at 06:31 PM ---------- Previous post was at 06:28 PM ----------

Hello, mcu kd compatible for mtcD thanks

 

[Sniks91]

hello! i have erisin 3090.

android 4.4.4
band : unkkow
noyau : px3_v2.00.0020.00.00
build : common_v1.00.00056.53.1
mcu : lm-and841-7090v1.21

what rom i can use ?

thank you

 

[pcmender2005]

hello, mcu kd compatible with mtcD,thanks

---------- Post added at 06:31 PM ---------- Previous post was at 06:28 PM ----------

Hello, mcu kd compatible for mtcD thanks

For a start you are in the wrong thread for your MTCD MCU this is for MTCB/C. Second don't quote your first post on the space of 3 mins just be patients for somebody to reply your post. So in future Use the search bar first if no luck then ask your question in the correct thread. Look here
https://forum.xda-developers.com/an.../comprehensive-updated-mcu-list-mtcd-t3476880

---------- Post added at 06:46 PM ---------- Previous post was at 06:44 PM ----------

hello! i have erisin 3090.

android 4.4.4
band : unkkow
noyau : px3_v2.00.0020.00.00
build : common_v1.00.00056.53.1
mcu : lm-and841-7090v1.21

what rom i can use ?

thank you

You are in the wrong thread.