General Medeke/Navifly 7862

[Dudgeware]

Yay! I did a thing!

With a bit of dutch courage, I had a go at the modification & although it was a right bugger to do, I got there in the end. I made a video for others to see, I've set it as unlisted on youtube for now because I noticed an error I appear to have made twice. I said earlier that the spacializer didn't work & I was wrong. I only noticed when I watched the video I made that when I tested the HDMI I used the "surround" option in the mixer. For the other apps I used the "field "option. I must have made the same mistake when I tested on my workbench, because I've been & checked & when using the "field" option it works fine. So, mod works 100% as far as I know.

Here's the vid for those who are interested:

 

[Dudgeware]

Hi guys,

I just need help in knowing how to connect the reverse camera so that it displays on the HU when the gear is shifted to reverse.

Hope this helps....

 

[bdnstn]

Hope this helps....

I have seen this in some responses but not sure it helps, Below is the camera I got from Navifly and the wiring seems to be a bit different from just a single rear camera.

 

[Dudgeware]

I have seen this in some responses but not sure it helps, Below is the camera I got from Navifly and the wiring seems to be a bit different from just a single rear camera.

Looks like the same kit that I got. You say that both cams are working and that the problem is when you go into reverse, so it's either a problem with the reversing wiring or a setting in the options. From memory, the rear cam has a main lead that connects to the front cam, there's a black that goes to ground and a red that connects to the reversing light. At the front, there's a usb connection, I think there's an rca for the rear view connection & another wire that connects to the reversing light lead. There's also an option in settings to enable the rear view on reverse. I'll have a look tomorrow when I get the chance.

 

[surfer63]

With a bit of dutch courage, .....

Nice you fixed it.

However, being Dutch I always feel slightly insulted when someone mentions "Dutch courage".
So here a little history why Dutch courage is actually "English calm down and reduce fear for".
https://en.wikipedia.org/wiki/Dutch_courage (the short, more positive version)
And why the English should be thankful for their gin.

 

[Dudgeware]

Nice you fixed it.

However, being Dutch I always feel slightly insulted when someone mentions "Dutch courage".
So here a little history why Dutch courage is actually "English calm down and reduce fear for".
https://en.wikipedia.org/wiki/Dutch_courage (the short, more positive version)
And why the English should be thankful for their gin.

No insult intended, seeing as I'm a whiskey drinker, I'll have to find a more appropriate phrase

 

[nkbyrr]

I just installed a M700 (7862, 8Gb) and am having issues with both USB and Wi-Fi tethering through a Pixel 7. Both options are unusably slow. I've tested the hotspot with other devices and have no issues, just issues with this headunit. Mekede support is no help so far, anyone have suggestions?

 

[louforgiveno]

I just installed a M700 (7862, 8Gb) and am having issues with both USB and Wi-Fi tethering through a Pixel 7. Both options are unusably slow. I've tested the hotspot with other devices and have no issues, just issues with this headunit. Mekede support is no help so far, anyone have suggestions?

What speed tethering does your cell plan include? Are your speeds looking like 3g speeds?
Also if you haven't yet, set your phone's tethering to use 5ghz instead of 2.4ghz

 

[surfer63]

I just installed a M700 (7862, 8Gb) and am having issues with both USB and Wi-Fi tethering through a Pixel 7. Both options are unusably slow. I've tested the hotspot with other devices and have no issues, just issues with this headunit. Mekede support is no help so far, anyone have suggestions?

What speed tethering does your cell plan include? Are your speeds looking like 3g speeds?
Also if you haven't yet, set your phone's tethering to use 5ghz instead of 2.4ghz

To add to both of @louforgiveno 's questions: What is unusably slow? What are your down/upload speeds? "unusable" is a very subjective statement.

 

[bdnstn]

Looks like the same kit that I got. You say that both cams are working and that the problem is when you go into reverse, so it's either a problem with the reversing wiring or a setting in the options. From memory, the rear cam has a main lead that connects to the front cam, there's a black that goes to ground and a red that connects to the reversing light. At the front, there's a usb connection, I think there's an rca for the rear view connection & another wire that connects to the reversing light lead. There's also an option in settings to enable the rear view on reverse. I'll have a look tomorrow when I get the chance.

Thanks @Dudgeware This is now resolved. It never crossed my mind to test if the red wire on the RCA actually had power. Apparently, the connection on the reverse bulb didn't make good contact and was the reason it wasn't switching when in reverse mode.

Do you know the pass code to enter factory settings? I need to switch between PAL and NTSC cos I can only see grey picture in reverse mode.

 

[Dudgeware]

Thanks @Dudgeware This is now resolved. It never crossed my mind to test if the red wire on the RCA actually had power. Apparently, the connection on the reverse bulb didn't make good contact and was the reason it wasn't switching when in reverse mode.

Do you know the pass code to enter factory settings? I need to switch between PAL and NTSC cos I can only see grey picture in reverse mode.

3368 should do the trick.

 

[j0hn83]

Do you know the pass code to enter factory settings? I need to switch between PAL and NTSC cos I can only see grey picture in reverse mode.

The pass is 3368 for Factory Settings (168 On Teyes).

These units support both PAL and NTSC with no toggle to switch between.
There is a toggle to switch between AHD or TVI/CVBS reverse cameras.

 

[Racker_CRO]

Anyone encountered a problem with START STOP car function not working after replacing stock navi with M500S? Nothing has changed on my car except this unit. As far as power connections are made everything looks ok. Unit powers off with car (standby) and after 48h it goes into full shutdown.
I've checked my car manual and none of conditions mentioned in manual are met for start stop to stop functioning. There is no warning on dashboard that function is malfunctioning.
I saw one option in navi factory settings "Automatic start stop" and I tried with ON and OFF, nothing changes. Car is Suzuki Vitara manual.

 

[matic7]

Anyone encountered a problem with START STOP car function not working after replacing stock navi with M500S? Nothing has changed on my car except this unit. As far as power connections are made everything looks ok. Unit powers off with car (standby) and after 48h it goes into full shutdown.
I've checked my car manual and none of conditions mentioned in manual are met for start stop to stop functioning. There is no warning on dashboard that function is malfunctioning.
I saw one option in navi factory settings "Automatic start stop" and I tried with ON and OFF, nothing changes. Car is Suzuki Vitara manual.

Maybe you have some battery issue. START STOP often stops working when battery voltage drops under 60% or lower, depend from a car. I'm guessing you spent quite a bit of time in a car with not running engine while you were installing and testing the radio. If the voltage drops below a certain level, the car starts to turn off the consumers of electricity, but the car continues to start normally. I assume you have an AGM or EFB battery in your car. At least it should have it according to the START STOP function.

 

[Racker_CRO]

Yes I was a long time in car setting the radio. Tested my my car battery and it reported ok. I tried to play with car settings and once I set start stop option to economy it started to work. I set it back to standard and again it worked. So either this option change helped or battery was charged in last two days of driving to work and back home. So for now I've solved all issues with this device.

 

[nkbyrr]

To add to both of @louforgiveno 's questions: What is unusably slow? What are your down/upload speeds? "unusable" is a very subjective statement.

Thanks for the responses. I was getting around .08 Mbps down, .5 up. I ended up doing a reset on the headunit and it works much better now.

 

[bdnstn]

The pass is 3368 for Factory Settings (168 On Teyes).

These units support both PAL and NTSC with no toggle to switch between.
There is a toggle to switch between AHD / TVI(CVBS) reverse cameras.

"There is a toggle to switch between AHD / TVI(CVBS) reverse cameras"

Spot On! I figured this out too. All my problems on this unit are now resolved

 

[[email protected]]

Hello friends, do you know how to increase the volume gain of this Mekede m6 pro plus radio, it is close to my old M700s and too weak in gain, its maximum volume is half..

 

[Somgeym]

Hello friends, do you know how to increase the volume gain of this Mekede m6 pro plus radio, it is close to my old M700s and too weak in gain, its maximum volume is half..

Hello;
I don’t know if this can help, but when I use the Youtube app, the sound is low and of average quality, but when I use the Bluetooth or the Youtube music app, the sound quality and volume is much better.
I have a Navi fly.

 

[[email protected]]

Hello;
I don’t know if this can help, but when I use the Youtube app, the sound is low and of average quality, but when I use the Bluetooth or the Youtube music app, the sound quality and volume is much better.
I have a Navi fly.

It has the general volume setting there you can adjust the types of volumes like GPS, radio, Bluetooth etc. I just can't tell you how to access this setting because I'm at work right now.